{"id":9605,"date":"2026-07-04T10:33:18","date_gmt":"2026-07-04T10:33:18","guid":{"rendered":"https:\/\/materialparts.com\/btt6200-4ema\/"},"modified":"2026-07-04T10:33:18","modified_gmt":"2026-07-04T10:33:18","slug":"btt6200-4ema","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/btt6200-4ema\/","title":{"rendered":"BTT6200-4EMA"},"content":{"rendered":"

Productos<\/h2>\n

The BTT6200-4EMA from Infineon Technologies is a quad-channel smart high-side power switch from the PROFET+ 24V family, designed for 24 V truck and transportation systems. With a 200 m\u03a9 on-resistance per channel and 1 A nominal load current per channel (all channels active), it integrates comprehensive diagnostic and protection features including proportional current sense, over-temperature latch, short-circuit protection, and open-load detection, housed in a PG-SSOP-24-14 EP exposed-pad package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n
Canales<\/td>\n4 (quad)<\/td>\n<\/tr>\n
Operating Voltage<\/td>\n5 V to 36 V<\/td>\n<\/tr>\n
Max Supply Voltage<\/td>\n65 V (load dump)<\/td>\n<\/tr>\n
RDS(ON) per Channel<\/td>\n200 m\u03a9 @ 25\u00b0C, 400 m\u03a9 @ 150\u00b0C<\/td>\n<\/tr>\n
Nominal Load Current (all ch)<\/td>\n1 A per channel<\/td>\n<\/tr>\n
Short Circuit Current Limit<\/td>\n9 A minimum<\/td>\n<\/tr>\n
Standby Current<\/td>\n500 nA max @ 25\u00b0C<\/td>\n<\/tr>\n
Current Sense Ratio (kILIS)<\/td>\n300 typical<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to 150\u00b0C<\/td>\n<\/tr>\n
Paquete<\/td>\nPG-SSOP-24-14 EP<\/td>\n<\/tr>\n
Cualificaci\u00f3n<\/td>\nAEC-Q100, ISO 26262-ready<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Quad-channel high-side switch with 200 m\u03a9 per channel for 24 V truck applications<\/li>\n
  • Proportional analog current sense (kILIS = 300) for precise load monitoring and LED diagnosis<\/li>\n
  • Over-temperature protection with latch-off for fault safety<\/li>\n
  • Open-load detection in both ON and OFF states with short-circuit to battery\/ground indication<\/li>\n
  • 3.3 V and 5 V compatible logic inputs with diagnostic enable and channel selection<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • 24 V truck body control modules (BCM) driving lamps and LEDs<\/li>\n
    • Automotive secondary fuse box and power distribution units<\/li>\n
    • ADAS domain controller peripheral power switching<\/li>\n
    • Industrial 24 V load control with diagnostic feedback<\/li>\n
    • Agricultural and construction vehicle lighting systems<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The BTT6200-4EMA from Infineon Technologies is a quad-channel smart high-side power switch from the PROFET+ 24V family, designed for 24 V truck and transportation systems. With a 200 m\u03a9 on-resistance per channel and 1 A nominal load current per channel (all channels active), it integrates comprehensive diagnostic and protection features including proportional current […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,29],"tags":[854],"chip_brand":[173],"class_list":["post-9605","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-power-management-ics-pmic","tag-btt6200-4ema","chip_brand-infineon"],"acf":{"brief_explanation":"Quad-channel 200m\u03a9 PROFET+ 24V smart high-side switch, 1A\/ch, AEC-Q100, PG-SSOP-24 EP","date_code":"","package_case":"PG-SSOP-24-14 EP (Exposed Pad)","in_stock":11118,"datasheet":"https:\/\/www.infineon.com\/dgdl\/Infineon-BTT6200-4EMA-DS-v01_00-EN.pdf","price":"$2.24 @ 3000+","product_introduction":"The BTT6200-4EMA is an Infineon PROFET+ 24V family quad-channel smart high-side power switch fabricated in Smart6 HV technology. Each channel features a 200 m\u03a9 N-channel vertical power MOSFET with charge pump, capable of driving loads such as R10W 24V lamps or R5W 12V lamps and LEDs. The device integrates proportional load current sense multiplexed across all four channels with a typical sense ratio of 300 (kILIS), enabling precise diagnosis of even small LED loads. Comprehensive protection includes over-temperature latch, short-circuit current limitation (9 A min), open-load detection in both ON and OFF states, and reverse polarity protection with external components. The device is AEC-Q100 qualified and ISO 26262-ready for automotive functional safety applications.","working_principle":"The BTT6200-4EMA operates through four parallel high-side switch channels: (1) Power Stage \u2014 each channel uses an N-channel vertical power MOSFET with an integrated charge pump to drive the gate above the supply rail, enabling high-side switching of loads connected to ground; (2) Diagnostic Subsystem \u2014 a multiplexed current sense circuit mirrors a proportional fraction (1\/300) of each channel's load current to the IS pin, selected by DSEL0\/DSEL1 digital inputs, enabling the MCU to monitor each channel's load status; (3) Protection Logic \u2014 over-temperature sensors per channel trigger latch-off when junction temperature exceeds threshold, short-circuit detection limits current to 9 A minimum, and open-load comparators detect both disconnected loads (OFF state via pull-up) and short-circuit to battery\/ground conditions; (4) Control Interface \u2014 3.3 V \/ 5 V compatible logic inputs (IN0\u2013IN3) switch individual channels, while DEN enables the diagnostic output.","pin_description":"
      Pin<\/th>Symbol<\/th>Function<\/th><\/tr>
      2<\/td>IN0<\/td>Input signal for channel 0 activation<\/td><\/tr>
      4<\/td>GND<\/td>Ground connection<\/td><\/tr>
      5<\/td>IN1<\/td>Input signal for channel 1 activation<\/td><\/tr>
      6<\/td>DEN<\/td>Diagnostic enable (active high)<\/td><\/tr>
      7<\/td>IS<\/td>Current sense output (analog, proportional)<\/td><\/tr>
      8<\/td>DSEL0<\/td>Diagnostic channel select bit 0<\/td><\/tr>
      9<\/td>IN2<\/td>Input signal for channel 2 activation<\/td><\/tr>
      10<\/td>IN3<\/td>Input signal for channel 3 activation<\/td><\/tr>
      11<\/td>DSEL1<\/td>Diagnostic channel select bit 1<\/td><\/tr>
      13<\/td>OUT3<\/td>Protected high-side output channel 3<\/td><\/tr>
      17<\/td>OUT0<\/td>Protected high-side output channel 0<\/td><\/tr>
      20<\/td>OUT1<\/td>Protected high-side output channel 1<\/td><\/tr>
      22<\/td>VS<\/td>Supply voltage (battery)<\/td><\/tr>
      24<\/td>OUT2<\/td>Protected high-side output channel 2<\/td><\/tr><\/table>","application_scenarios":"
      • 24 V truck BCM driving four R10W lamp channels with individual current monitoring and fault detection<\/li>
      • Construction vehicle LED lighting controller with open-load diagnosis for each lamp string<\/td><\/tr>
      ADAS domain controller peripheral power distribution with ISO 26262 functional safety<\/td><\/tr>
      Industrial 24 V automation I\/O module switching solenoid valves with short-circuit protection<\/td><\/tr>
      Agricultural equipment multi-channel lamp driver with over-temperature latch for harsh environments<\/td><\/tr><\/ul>","alternative_models":"
      Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
      BTT6200-4ESA<\/td>Infineon<\/td>Newer PG-TSDSO-24 package, ISO 26262-ready, 48V extended<\/td><\/tr>
      BTH6200-4ESA<\/td>Infineon<\/td>48 V board net version, up to 60 V operating<\/td><\/tr>
      BTS6200-4ESA<\/td>Infineon<\/td>Earlier generation PROFET+ 24V quad switch<\/td><\/tr>
      TLE8240SA<\/td>Infineon<\/td>Quad low-side switch alternative<\/td><\/tr>
      NCV84160<\/td>onsemi<\/td>Quad smart high-side switch, 24 V automotive<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9605","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=9605"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9605\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=9605"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=9605"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=9605"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=9605"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}