{"id":9166,"date":"2026-07-02T12:01:45","date_gmt":"2026-07-02T12:01:45","guid":{"rendered":"https:\/\/materialparts.com\/mpq8632gle-8-z\/"},"modified":"2026-07-02T12:01:45","modified_gmt":"2026-07-02T12:01:45","slug":"mpq8632gle-8-z","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/mpq8632gle-8-z\/","title":{"rendered":"MPQ8632GLE-8-Z"},"content":{"rendered":"

Productos<\/h2>\n

The MPQ8632GLE-8-Z is a Monolithic Power Systems (MPS) 18V, 8A fully integrated synchronous step-down converter using constant-on-time (COT) control for ultrafast transient response. Part of the scalable MPQ8632 family (4A to 20A), it shares the same QFN-16 (3x4mm) footprint as the 4A\/6A\/10A\/12A variants, enabling easy current scaling without PCB redesign.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n
Input Voltage Range<\/td>\n4.5V to 18V (internal bias); 2.5V to 18V (external 5V bias)<\/td>\n<\/tr>\n
Corriente de salida<\/td>\n8A<\/td>\n<\/tr>\n
Output Voltage Range<\/td>\n0.611V to 13V<\/td>\n<\/tr>\n
Reference Voltage Accuracy<\/td>\n0.5% (0\u00b0C to +70\u00b0C)<\/td>\n<\/tr>\n
Switching Frequency<\/td>\n200kHz to 1MHz (programmable via R_FREQ)<\/td>\n<\/tr>\n
Control Mode<\/td>\nAdaptive Constant-On-Time (COT)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to +125\u00b0C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Scalable family: 4A\/6A\/8A\/10A\/12A share same QFN-16 footprint<\/li>\n
  • Low input voltage operation from 2.5V with external 5V bias<\/li>\n
  • Programmable switching frequency: 200kHz to 1MHz via external resistor<\/li>\n
  • Feed-forward compensation for nearly constant frequency vs. VIN<\/li>\n
  • 0.5% reference voltage accuracy (0\u00b0C to +70\u00b0C)<\/li>\n
  • Programmable soft-start time<\/li>\n
  • Pre-bias start-up support<\/li>\n
  • Non-latch OCP, OVP, and thermal shutdown protection<\/li>\n
  • Open-drain power good output<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Server and storage POL power supplies<\/li>\n
    • Networking equipment distributed power<\/li>\n
    • FPGA, DSP, and ASIC core voltage rails<\/li>\n
    • Base station and telecom power<\/li>\n
    • High-end consumer electronics<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The MPQ8632GLE-8-Z is a Monolithic Power Systems (MPS) 18V, 8A fully integrated synchronous step-down converter using constant-on-time (COT) control for ultrafast transient response. Part of the scalable MPQ8632 family (4A to 20A), it shares the same QFN-16 (3x4mm) footprint as the 4A\/6A\/10A\/12A variants, enabling easy current scaling without PCB redesign. Key Specifications Input […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[31,13],"tags":[],"chip_brand":[172],"class_list":["post-9166","post","type-post","status-publish","format-standard","hentry","category-dc-dc-converters","category-integrated-circuits-ics","chip_brand-mps"],"acf":{"brief_explanation":"18V 8A synchronous buck, COT, 200kHz-1MHz prog., scalable family, QFN-16 (3x4mm)","date_code":"","package_case":"QFN-16 (3mm x 4mm)","in_stock":7000,"datasheet":"https:\/\/www.monolithicpower.com\/en\/mpq8632-8.html","price":"$3.52 @ 1ku","product_introduction":"The MPQ8632GLE-8-Z is an MPS 18V, 8A fully integrated synchronous step-down converter using adaptive COT control for ultrafast transient response. Part of the scalable MPQ8632 family, the 4A\/6A\/8A\/10A\/12A variants share the same QFN-16 (3x4mm) footprint, enabling current scaling without PCB redesign. The switching frequency is programmable from 200kHz to 1MHz via an external resistor, with feed-forward compensation for nearly constant frequency across the input range. Features include 0.5% reference accuracy, programmable soft-start, pre-bias start-up, and comprehensive protection.","working_principle":"The MPQ8632GLE-8-Z uses adaptive constant-on-time (COT) control where the high-side MOSFET turns on for a calculated duration when the FB voltage drops below the reference. The on-time is programmed by the R_FREQ resistor and adaptively adjusted based on VIN and VOUT to maintain approximately constant switching frequency. The feed-forward from VIN through the R_FREQ resistor compensates for input voltage variations. The integrated low-side MOSFET provides synchronous rectification for high efficiency. The internal 4.8V LDO powers the driver and control circuits, or external 5V bias can override it for low VIN operation down to 2.5V. Non-latch OCP monitors valley current, OVP protects against output overvoltage, and thermal shutdown activates at approximately 160\u00b0C.","pin_description":"
      Pin<\/th>Mnemonic<\/th>Description<\/th><\/tr>
      1<\/td>EN<\/td>Enable input (active high)<\/td><\/tr>
      2<\/td>FREQ<\/td>Frequency set resistor to VIN<\/td><\/tr>
      3<\/td>FB<\/td>Feedback voltage input<\/td><\/tr>
      4<\/td>SS<\/td>Soft-start capacitor pin<\/td><\/tr>
      5<\/td>AGND<\/td>Analog ground<\/td><\/tr>
      6<\/td>PG<\/td>Power good (open drain)<\/td><\/tr>
      7<\/td>VCC<\/td>Internal 4.8V LDO output \/ external bias<\/td><\/tr>
      8<\/td>BST<\/td>Bootstrap capacitor pin<\/td><\/tr>
      9-14<\/td>PGND<\/td>Power ground (6 pins)<\/td><\/tr>
      15-16<\/td>SW<\/td>Switch node output<\/td><\/tr><\/table>","application_scenarios":"
      • Server VRM 12V to 1.0V\/1.2V core rail at 8A with scalable family for 4A-12A<\/li>\n
      • Networking equipment POL with 200kHz-1MHz programmable frequency<\/li>\n
      • FPGA\/DSP core power requiring ultrafast transient response from 5V\/12V<\/li>\n
      • Base station DSP voltage rail with power good monitoring<\/li>\n
      • High-end TV SoC power with pre-bias start-up capability<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
        MPQ8632GLE-12-Z<\/td>MPS<\/td>12A version, same footprint<\/td><\/tr>
        MPQ8633BGLE-Z<\/td>MPS<\/td>20A, QFN-21, different footprint<\/td><\/tr>
        TPS54560B<\/td>TI<\/td>5A, 60V, lower current<\/td><\/tr>
        ISL6505<\/td>Renesas<\/td>20A POL, different package<\/td><\/tr>
        LTM4650<\/td>ADI<\/td>25A uModule with inductor<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9166","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=9166"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/9166\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=9166"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=9166"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=9166"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=9166"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}