{"id":8968,"date":"2026-07-01T06:13:59","date_gmt":"2026-07-01T06:13:59","guid":{"rendered":"https:\/\/materialparts.com\/lm5117pmhx-nopb-2\/"},"modified":"2026-07-03T08:01:34","modified_gmt":"2026-07-03T08:01:34","slug":"lm5117pmhx-nopb-2","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/lm5117pmhx-nopb-2\/","title":{"rendered":"LM5117PMHX\/NOPB"},"content":{"rendered":"

Productos<\/h2>\n

The LM5117PMHX\/NOPB is a TI 65V synchronous buck DC-DC controller with 200\/480kHz switching, synchronous rectification, soft start, and frequency control. Packaged in 20-HTSSOP, -40C to +125C.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n
Vin<\/td>\n5.5V to 65V<\/td>\n<\/tr>\n
Topology<\/td>\nBuck (step-down)<\/td>\n<\/tr>\n
Fsw<\/td>\n200kHz \/ 480kHz<\/td>\n<\/tr>\n
Salida<\/td>\nTransistor Driver<\/td>\n<\/tr>\n
Synch Rect<\/td>\nYes<\/td>\n<\/tr>\n
Paquete<\/td>\n20-HTSSOP<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • 5.5V to 65V wide input range<\/li>\n
  • Synchronous buck controller<\/li>\n
  • 200kHz or 480kHz switching<\/li>\n
  • Synchronous rectification<\/li>\n
  • Soft start and frequency control<\/li>\n
  • Current mode control<\/li>\n
  • -40C to +125C operation<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • 48V telecom POL<\/li>\n
    • 12V\/24V industrial bus<\/li>\n
    • Automotive front-end supply<\/li>\n
    • LED driver pre-regulator<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The LM5117PMHX\/NOPB is a TI 65V synchronous buck DC-DC controller with 200\/480kHz switching, synchronous rectification, soft start, and frequency control. Packaged in 20-HTSSOP, -40C to +125C. Key Specifications Vin 5.5V to 65V Topology Buck (step-down) Fsw 200kHz \/ 480kHz Output Transistor Driver Synch Rect Yes Package 20-HTSSOP Features 5.5V to 65V wide input […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[31,13],"tags":[597],"chip_brand":[138],"class_list":["post-8968","post","type-post","status-publish","format-standard","hentry","category-dc-dc-converters","category-integrated-circuits-ics","tag-lm5117pmhx-nopb","chip_brand-ti"],"acf":{"brief_explanation":"65V sync buck controller, 200\/480kHz, HTSSOP-20","date_code":"","package_case":"20-Pin HTSSOP (6.5 x 4.4 x 1.0 mm)","in_stock":3800,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/lm5117.pdf","price":"$2.95 @ 1ku","product_introduction":"The LM5117PMHX\/NOPB is a Texas Instruments 65V synchronous step-down (buck) DC-DC controller in a 20-pin HTSSOP package. As a controller (not a converter), it drives external N-channel MOSFETs for the high-side and low-side switches, allowing designers to optimize the power stage for specific output current and efficiency requirements. The 5.5V to 65V input range supports telecom 48V, automotive 12V\/24V, and industrial bus rails. The selectable 200kHz or 480kHz switching frequency allows trade-offs between efficiency (lower frequency) and solution size (higher frequency). The synchronous rectification eliminates the Schottky diode conduction loss, improving efficiency especially at low output voltages. The current mode control provides cycle-by-cycle current limiting and simplified loop compensation. The soft start eliminates inrush current during startup, and the frequency control pin allows synchronization to an external clock or frequency dithering for EMI reduction.","working_principle":"The LM5117 uses peak current mode control for the buck converter. The error amplifier compares the FB pin voltage against an internal reference, and the resulting COMP voltage sets the peak inductor current threshold. The high-side MOSFET turns on at the beginning of each switching cycle, ramping up the inductor current. When the current sense signal reaches the COMP threshold, the high-side MOSFET turns off and the low-side synchronous MOSFET turns on. The cycle repeats at the next clock edge. The current mode control provides cycle-by-cycle overcurrent protection and simplifies loop compensation. The adaptive dead-time control inserts a non-overlap delay between high-side and low-side transitions to prevent shoot-through current.","pin_description":"
      Pin<\/th>Mnemonic<\/th>Description<\/th><\/tr>
      1<\/td>VIN<\/td>Input supply (5.5-65V)<\/td><\/tr>
      2<\/td>EN<\/td>Enable<\/td><\/tr>
      3<\/td>SS<\/td>Soft start capacitor<\/td><\/tr>
      4<\/td>FB<\/td>Feedback (0.8V ref)<\/td><\/tr>
      5<\/td>COMP<\/td>Error amplifier output<\/td><\/tr>
      6-10<\/td>Control<\/td>Frequency, sync, current sense<\/td><\/tr>
      11-15<\/td>Gate Drive<\/td>HDRV, LDRV, BOOT, SW<\/td><\/tr>
      16-20<\/td>GND\/VCC<\/td>Ground and bias supply<\/td><\/tr><\/table>","application_scenarios":"
      • 48V telecom bus to 12V POL with external MOSFETs for 10A output<\/li>\n
      • Automotive 12V battery to 3.3V with 65V transient protection and 125C operation<\/li>\n
      • Industrial 24V to 5V synchronous buck with frequency sync for EMI control<\/li>\n
      • LED driver pre-regulator with 480kHz for compact solution<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
        LM5116<\/td>TI<\/td>80V input, similar controller<\/td><\/tr>
        LM5117PMX\/NOPB<\/td>TI<\/td>TSSOP-20, non-power pad<\/td><\/tr>
        LM5145<\/td>TI<\/td>65V, 1MHz, PMBus<\/td><\/tr>
        MP3910<\/td>MPS<\/td>Similar 60V controller<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/8968","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=8968"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/8968\/revisions"}],"predecessor-version":[{"id":9481,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/8968\/revisions\/9481"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=8968"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=8968"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=8968"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=8968"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}