{"id":8493,"date":"2026-06-29T02:54:34","date_gmt":"2026-06-29T02:54:34","guid":{"rendered":"https:\/\/materialparts.com\/lm35dt-nopb\/"},"modified":"2026-06-29T06:28:08","modified_gmt":"2026-06-29T06:28:08","slug":"lm35dt-nopb","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/lm35dt-nopb\/","title":{"rendered":"LM35DT\/NOPB"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The LM35DT\/NOPB from Texas Instruments is a precision integrated-circuit temperature sensor with a linear 10 mV\/\u00b0C output scale factor in a TO-220-3 through-hole package. It operates from 4V to 30V supply without external calibration, provides accuracy of \u00b10.5\u00b0C at 25\u00b0C, and measures temperature from -55\u00b0C to +150\u00b0C, making it ideal for direct temperature sensing in thermal management and environmental monitoring.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Output Type<\/td>\n<td>Analog voltage (10 mV\/\u00b0C)<\/td>\n<\/tr>\n<tr>\n<td>Temperature Range<\/td>\n<td>-55\u00b0C to +150\u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Accuracy at 25\u00b0C<\/td>\n<td>\u00b10.5\u00b0C (typ), \u00b11.0\u00b0C (max)<\/td>\n<\/tr>\n<tr>\n<td>Linearity<\/td>\n<td>\u00b10.15\u00b0C typ<\/td>\n<\/tr>\n<tr>\n<td>Tensi\u00f3n de alimentaci\u00f3n<\/td>\n<td>4V to 30V<\/td>\n<\/tr>\n<tr>\n<td>Supply Current<\/td>\n<td>60 \u00b5A typ (self-heating &lt;0.1\u00b0C)<\/td>\n<\/tr>\n<tr>\n<td>Output Impedance<\/td>\n<td>0.1 Ohm typ<\/td>\n<\/tr>\n<tr>\n<td>Calibration<\/td>\n<td>Not required (factory trimmed)<\/td>\n<\/tr>\n<tr>\n<td>Temperatura de funcionamiento<\/td>\n<td>-55\u00b0C to +150\u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>TO-220-3 (tab to GND)<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>Linear 10 mV\/\u00b0C output directly calibrated in Celsius<\/li>\n<li>No external calibration or trimming required<\/li>\n<li>\u00b10.5\u00b0C accuracy at 25\u00b0C<\/li>\n<li>Low 60 \u00b5A supply current minimizes self-heating<\/li>\n<li>Wide 4V to 30V supply range<\/li>\n<li>Low output impedance for direct ADC drive<\/li>\n<li>TO-220 package allows heat sink mounting<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Thermal management and overtemperature protection<\/li>\n<li>HVAC and environmental monitoring<\/li>\n<li>Battery temperature monitoring<\/li>\n<li>Power supply thermal shutdown<\/li>\n<li>Industrial process temperature measurement<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The LM35DT\/NOPB from Texas Instruments is a precision integrated-circuit temperature sensor with a linear 10 mV\/\u00b0C output scale factor in a TO-220-3 through-hole package. It operates from 4V to 30V supply without external calibration, provides accuracy of \u00b10.5\u00b0C at 25\u00b0C, and measures temperature from -55\u00b0C to +150\u00b0C, making it ideal for direct temperature [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[138],"class_list":["post-8493","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-ti"],"acf":{"brief_explanation":"Precision analog temp sensor, 10mV\/\u00b0C, -55 to +150\u00b0C, \u00b10.5\u00b0C, TO-220-3","date_code":"","package_case":"TO-220-3 (14.99 x 10.16 x 4.45 mm)","in_stock":12182,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/lm35.pdf","price":"$0.92 @ 1ku","product_introduction":"The Texas Instruments LM35DT\/NOPB is a precision integrated-circuit temperature sensor that produces an output voltage linearly proportional to the Celsius temperature with a scale factor of 10 mV\/\u00b0C. Unlike thermistors or RTDs that require external signal conditioning, the LM35 provides a direct voltage output readable by any ADC without calibration or trimming. At 25\u00b0C, it achieves \u00b10.5\u00b0C typical accuracy, and the linear output eliminates lookup tables or polynomial calculations. The TO-220 package allows heat sink attachment for measuring surface or ambient temperature, and the 60 \u00b5A supply current ensures self-heating is below 0.1\u00b0C in still air. The DT suffix indicates the TO-220 package rated for the full -55\u00b0C to +150\u00b0C range.","working_principle":"The LM35DT\/NOPB uses a bandgap-based temperature sensing circuit where the difference in base-emitter voltage (VBE) between two bipolar transistors operating at different current densities is proportional to absolute temperature (PTAT). This PTAT voltage is amplified and offset so that 0\u00b0C corresponds to 0V output, with a precisely trimmed gain of 10 mV\/\u00b0C. The internal reference and trimming are performed at the factory using laser trimming of thin-film resistors, ensuring \u00b10.5\u00b0C accuracy at 25\u00b0C without any user calibration. The low 60 \u00b5A supply current minimizes Joule heating (P = V x I = 5V x 60\u00b5A = 0.3 mW), keeping self-heating errors below 0.1\u00b0C in still air. The low output impedance (0.1 Ohm) allows direct connection to ADC inputs without buffer amplifiers. For negative temperature measurement, a pull-down resistor to a negative supply enables the output to go below ground.","pin_description":"<table border=\"1\"><tr><th>Pin<\/th><th>Name<\/th><th>Description<\/th><\/tr><tr><td>1<\/td><td>VOUT<\/td><td>Analog Output Voltage (10 mV\/\u00b0C)<\/td><\/tr><tr><td>2<\/td><td>VCC<\/td><td>Supply Voltage (4-30V)<\/td><\/tr><tr><td>3<\/td><td>GND<\/td><td>Ground \/ Common<\/td><\/tr><\/table>","application_scenarios":"<ul><li><b>Thermal Shutdown<\/b>: Direct analog output to MCU ADC for overtemperature protection in power supplies, motor drives, and amplifier heatsinks<\/li><li><b>HVAC Monitoring<\/b>: Room temperature measurement with \u00b10.5\u00b0C accuracy feeding thermostat control algorithms without calibration<\/li><li><b>Battery Temperature<\/b>: Monitoring Li-Ion battery pack temperature during charging with 10 mV\/\u00b0C output compatible with fuel gauge ADC inputs<\/li><li><b>Industrial Process<\/b>: Wide -55\u00b0C to +150\u00b0C range for process temperature monitoring in food processing, chemical, and manufacturing applications<\/li><li><b>Heat Sink Monitoring<\/b>: TO-220 package mounted directly on heat sink for real-time thermal monitoring with low self-heating error<\/li><\/ul>","alternative_models":"<table border=\"1\"><tr><th>Model<\/th><th>Brand<\/th><th>Output<\/th><th>Range (\u00b0C)<\/th><th>Package<\/th><\/tr><tr><td>LM35DZ\/NOPB<\/td><td>TI<\/td><td>10mV\/\u00b0C<\/td><td>0 to 100<\/td><td>TO-92<\/td><\/tr><tr><td>LM34DZ\/NOPB<\/td><td>TI<\/td><td>10mV\/\u00b0F<\/td><td>-50 to 300\u00b0F<\/td><td>TO-92<\/td><\/tr><tr><td>TMP36GT9Z<\/td><td>ADI<\/td><td>10mV\/\u00b0C<\/td><td>-40 to 125<\/td><td>TO-92<\/td><\/tr><tr><td>MCP9700T-E\/TT<\/td><td>Microchip<\/td><td>10mV\/\u00b0C<\/td><td>-40 to 125<\/td><td>SOT-23<\/td><\/tr><tr><td>LMT85DCKR<\/td><td>TI<\/td><td>8.2mV\/\u00b0C<\/td><td>-50 to 150<\/td><td>SC70-5<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/8493","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=8493"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/8493\/revisions"}],"predecessor-version":[{"id":8494,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/8493\/revisions\/8494"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=8493"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=8493"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=8493"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=8493"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}