{"id":7922,"date":"2026-06-28T04:28:49","date_gmt":"2026-06-28T04:28:49","guid":{"rendered":"https:\/\/materialparts.com\/sn74hc14n\/"},"modified":"2026-06-28T11:46:02","modified_gmt":"2026-06-28T11:46:02","slug":"sn74hc14n","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/sn74hc14n\/","title":{"rendered":"SN74HC14N"},"content":{"rendered":"

Productos<\/h2>\n

The SN74HC14N from Texas Instruments is a hex Schmitt-trigger inverter with CMOS technology, wide supply range (2V to 6V), hysteresis for noise immunity, and 17ns propagation delay in a 14-pin PDIP package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n
Number of Gates<\/td>\n6 (hex inverter with Schmitt trigger)<\/td>\n<\/tr>\n
Logic Family<\/td>\nHC (High-speed CMOS)<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n2V to 6V<\/td>\n<\/tr>\n
Input Threshold HIGH (VT+)<\/td>\n3.15V min @ VCC=4.5V<\/td>\n<\/tr>\n
Input Threshold LOW (VT-)<\/td>\n0.9V max @ VCC=4.5V<\/td>\n<\/tr>\n
Hysteresis (VT+ – VT-)<\/td>\n0.8V min @ VCC=4.5V<\/td>\n<\/tr>\n
Retardo de propagaci\u00f3n<\/td>\n17ns typical @ VCC=5V<\/td>\n<\/tr>\n
Output Drive (IOL\/IOH)<\/td>\n4mA \/ -4mA @ VCC=4.5V<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to +85\u00b0C<\/td>\n<\/tr>\n
Paquete<\/td>\nPDIP-14 (19.3 x 6.35mm)<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Six Schmitt-trigger inverters<\/li>\n
  • Wide supply voltage: 2V to 6V<\/li>\n
  • Input hysteresis for noise immunity<\/li>\n
  • Slow input edge tolerance (no oscillation)<\/li>\n
  • 17ns propagation delay at 5V<\/li>\n
  • 4mA output drive at 4.5V<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Square wave oscillator (RC)<\/li>\n
    • Signal conditioning and debouncing<\/li>\n
    • Slow edge to fast edge conversion<\/li>\n
    • Level translation (with resistors)<\/li>\n
    • Power-on reset generation<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The SN74HC14N from Texas Instruments is a hex Schmitt-trigger inverter with CMOS technology, wide supply range (2V to 6V), hysteresis for noise immunity, and 17ns propagation delay in a 14-pin PDIP package. Key Specifications Number of Gates 6 (hex inverter with Schmitt trigger) Logic Family HC (High-speed CMOS) Supply Voltage 2V to 6V […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[138],"class_list":["post-7922","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-ti"],"acf":{"brief_explanation":"Hex Schmitt-trigger inverter, 2-6V HC CMOS, hysteresis, PDIP-14","date_code":"","package_case":"PDIP-14 (19.3 x 6.35 x 4.57mm, 2.54mm pitch, through-hole)","in_stock":6500,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/sn74hc14.pdf","price":"$0.32 @ 1ku","product_introduction":"The SN74HC14N from Texas Instruments is a hex Schmitt-trigger inverter\u2014six independent inverting buffers with hysteresis on each input. The Schmitt-trigger input provides two distinct threshold voltages: a higher threshold (VT+) for rising inputs and a lower threshold (VT-) for falling inputs. This hysteresis (minimum 0.8V at 4.5V supply) makes the device immune to noise on slowly changing signals, preventing the output oscillation that would occur with a standard inverter. This makes the 74HC14 the go-to device for cleaning up noisy signals, debouncing mechanical switches, and generating clock signals from RC oscillators. The 2V to 6V supply range makes it compatible with both 3.3V and 5V systems. The N suffix denotes the PDIP-14 through-hole package.","working_principle":"The SN74HC14N's Schmitt-trigger inputs use positive feedback to create two switching thresholds. When the input voltage rises from LOW to HIGH, the output does not switch until the input exceeds VT+ (approximately 2.4V at VCC=4.5V). Once the output switches LOW, the positive feedback lowers the effective threshold to VT- (approximately 1.4V at VCC=4.5V). The input must now drop below VT- before the output switches back HIGH. This hysteresis band (VT+ - VT- \u2248 1V) means that noise or ringing on the input that is smaller than the hysteresis cannot cause false switching. In an RC oscillator, one Schmitt inverter with a resistor from output to input and a capacitor from input to ground creates a free-running square wave: the capacitor charges through the resistor until VT+ is reached, the output goes LOW, the capacitor discharges until VT- is reached, and the cycle repeats. The oscillation frequency is approximately f = 1\/(0.8 \u00d7 R \u00d7 C). Without hysteresis, a standard inverter in this configuration would latch at its linear bias point rather than oscillate.","pin_description":"\n
      Pin<\/th>Name<\/th>Type<\/th>Description<\/th><\/tr>\n
      1<\/td>1A<\/td>Input<\/td>Inverter 1 input (Schmitt trigger)<\/td><\/tr>\n
      2<\/td>1Y<\/td>Output<\/td>Inverter 1 output<\/td><\/tr>\n
      3<\/td>2A<\/td>Input<\/td>Inverter 2 input<\/td><\/tr>\n
      4<\/td>2Y<\/td>Output<\/td>Inverter 2 output<\/td><\/tr>\n
      5<\/td>3A<\/td>Input<\/td>Inverter 3 input<\/td><\/tr>\n
      6<\/td>3Y<\/td>Output<\/td>Inverter 3 output<\/td><\/tr>\n
      7<\/td>GND<\/td>Power<\/td>Ground<\/td><\/tr>\n
      8<\/td>4Y<\/td>Output<\/td>Inverter 4 output<\/td><\/tr>\n
      9<\/td>4A<\/td>Input<\/td>Inverter 4 input<\/td><\/tr>\n
      10<\/td>5Y<\/td>Output<\/td>Inverter 5 output<\/td><\/tr>\n
      11<\/td>5A<\/td>Input<\/td>Inverter 5 input<\/td><\/tr>\n
      12<\/td>6Y<\/td>Output<\/td>Inverter 6 output<\/td><\/tr>\n
      13<\/td>6A<\/td>Input<\/td>Inverter 6 input<\/td><\/tr>\n
      14<\/td>VCC<\/td>Power<\/td>Supply (2V to 6V)<\/td><\/tr>\n<\/table>\n

      SN74HC14N uses the PDIP-14 package with the same hex inverter pinout as 7404\/74LS04\/74HC04: VCC at Pin 14, GND at Pin 7. Six independent Schmitt-trigger inverters: Inv 1 (Pin 1 in, Pin 2 out), Inv 2 (Pin 3 in, Pin 4 out), Inv 3 (Pin 5 in, Pin 6 out), Inv 4 (Pin 9 in, Pin 8 out), Inv 5 (Pin 11 in, Pin 10 out), Inv 6 (Pin 13 in, Pin 12 out). The Schmitt-trigger hysteresis is typically 0.9V at 4.5V supply (VT+ \u2248 2.85V, VT- \u2248 1.95V). This hysteresis cleans up slow edges from sensors, switches, and RC oscillators. For CMOS 4000-series equivalent, CD40106BE provides wider supply range (3-15V) with proportional hysteresis.<\/p>","application_scenarios":"

        \n
      • RC Oscillator:<\/strong> 1 inverter + R (10k\u03a9) + C (10nF) \u2248 1.25kHz clock; clean 50% duty cycle square wave<\/li>\n
      • Switch Debounce:<\/strong> Mechanical switch to input via 10k\u03a9 pull-up + 100nF cap; hysteresis eliminates bounce<\/li>\n
      • Signal Cleanup:<\/strong> Noisy sensor signal through 74HC14; hysteresis removes glitches; output is clean digital<\/li>\n
      • Level Shift:<\/strong> 3.3V signal through 74HC14 at VCC=5V; input compatible with 3.3V logic; output is 5V CMOS<\/li>\n
      • Power-On Reset:<\/strong> RC network on input; capacitor charges slowly; output stays HIGH (inverted LOW input) during power-up<\/li>\n<\/ul>","alternative_models":"\n
        Model<\/th>Manufacturer<\/th>Key Difference<\/th>Package<\/th>Supply<\/th><\/tr>\n
        74LS14N<\/td>TI\/Nexperia<\/td>Original TTL version with 5V-only supply, typical propagation delay 10-15ns<\/td>DIP-14<\/td>5V TTL<\/td><\/tr>\n
        74LS14D<\/td>TI\/Nexperia<\/td>Surface-mount SOIC version of LS with identical logic function<\/td>SOIC-14<\/td>5V TTL<\/td><\/tr>\n
        74HC14D<\/td>TI\/Nexperia<\/td>CMOS version with wide 2-6V supply range, lower power consumption and higher noise immunity<\/td>SOIC-14<\/td>2-6V CMOS<\/td><\/tr>\n
        74HC14N<\/td>TI\/Nexperia<\/td>Through-hole DIP version of HC family for prototyping and repair<\/td>DIP-14<\/td>2-6V CMOS<\/td><\/tr>\n
        74HCT14D<\/td>TI\/Nexperia<\/td>CMOS with TTL-compatible input levels, ideal for mixing with LS devices at 5V<\/td>SOIC-14<\/td>4.5-5.5V TTL-in<\/td><\/tr>\n
        74HCT14N<\/td>TI\/Nexperia<\/td>Through-hole DIP version of HCT family for prototyping and repair<\/td>DIP-14<\/td>4.5-5.5V TTL-in<\/td><\/tr>\n
        74AC14D<\/td>TI\/Nexperia<\/td>Advanced CMOS with 2-6V supply and higher output drive current (24mA vs 6mA for HC)<\/td>SOIC-14<\/td>2-6V CMOS<\/td><\/tr>\n
        74AC14N<\/td>TI\/Nexperia<\/td>Through-hole DIP version of AC family for prototyping and repair<\/td>DIP-14<\/td>2-6V CMOS<\/td><\/tr>\n
        74LVC14D<\/td>TI\/Nexperia<\/td>Low-voltage CMOS for 1.65-3.6V modern logic with 24mA output drive and bus-hold inputs<\/td>SOIC-14<\/td>1.65-3.6V CMOS<\/td><\/tr>\n
        74LVC14N<\/td>TI\/Nexperia<\/td>Through-hole DIP version of LVC family for prototyping and repair<\/td>DIP-14<\/td>1.65-3.6V CMOS<\/td><\/tr>\n<\/table>\n

        The 7414 is a Hex Schmitt-Trigger Inverter. Family variants span from the original LS TTL (5V only) to modern LVC\/AUP (down to 0.8V). HC and HCT versions offer 2-6V CMOS operation with HCT providing TTL-compatible input thresholds for mixed 5V systems. CD4000-series equivalents offer the widest 3-18V supply range at the cost of lower switching speed. DIP packages (N suffix) are through-hole; SOIC (D suffix) and TSSOP are surface-mount.<\/p>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7922","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=7922"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7922\/revisions"}],"predecessor-version":[{"id":8191,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7922\/revisions\/8191"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=7922"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=7922"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=7922"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=7922"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}