{"id":7860,"date":"2026-06-28T03:00:49","date_gmt":"2026-06-28T03:00:49","guid":{"rendered":"https:\/\/materialparts.com\/pic32mx575f512l-80i-pt\/"},"modified":"2026-06-28T10:20:04","modified_gmt":"2026-06-28T10:20:04","slug":"pic32mx575f512l-80i-pt","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/pic32mx575f512l-80i-pt\/","title":{"rendered":"PIC32MX575F512L-80I\/PT"},"content":{"rendered":"

Productos<\/h2>\n

The PIC32MX575F512L-80I\/PT is a 32-bit MIPS microcontroller from Microchip Technology with 512KB Flash, 64KB RAM, 80MHz, dual CAN, Ethernet MAC, USB 2.0 OTG, and 10-bit ADC in a 64-pin TQFP package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
N\u00facleo<\/td>\nMIPS32 M4K, 32-bit, 80MHz (105 DMIPS)<\/td>\n<\/tr>\n
Flash Memory<\/td>\n512 KB<\/td>\n<\/tr>\n
RAM<\/td>\n64 KB<\/td>\n<\/tr>\n
GPIOs<\/td>\n53<\/td>\n<\/tr>\n
ADC<\/td>\n10-bit, 1Msps, 16 channels<\/td>\n<\/tr>\n
Temporizadores<\/td>\n5x 16-bit, 5x 32-bit<\/td>\n<\/tr>\n
Comunicaci\u00f3n<\/td>\n2x CAN 2.0B, 2x UART, 2x SPI, 2x I2C<\/td>\n<\/tr>\n
Ethernet<\/td>\n10\/100 MAC (MII\/RMII)<\/td>\n<\/tr>\n
USB<\/td>\nUSB 2.0 OTG (full-speed)<\/td>\n<\/tr>\n
PMP<\/td>\nParallel master port (8\/16-bit)<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n2.0V to 3.6V (3.3V typical)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to +85\u00b0C (I-grade)<\/td>\n<\/tr>\n
Paquete<\/td>\nTQFP-64 (10 x 10mm)<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • 512KB Flash with 64KB RAM for complex applications<\/li>\n
  • Dual CAN 2.0B controllers for automotive and industrial networks<\/li>\n
  • Integrated 10\/100 Ethernet MAC with MII\/RMII<\/li>\n
  • USB 2.0 OTG with on-chip transceiver<\/li>\n
  • 10-bit ADC with 1Msps and 16 input channels<\/li>\n
  • Parallel Master Port for external memory and display interfacing<\/li>\n
  • 5 DMA channels for CPU-free data transfers<\/li>\n
  • Highest interrupt performance with 4-priority-level interrupt controller<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Industrial Ethernet and CAN gateways<\/li>\n
    • Automotive body controllers and gateways<\/li>\n
    • USB-enabled embedded systems<\/li>\n
    • Medical devices with connectivity<\/li>\n
    • Building automation controllers<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The PIC32MX575F512L-80I\/PT is a 32-bit MIPS microcontroller from Microchip Technology with 512KB Flash, 64KB RAM, 80MHz, dual CAN, Ethernet MAC, USB 2.0 OTG, and 10-bit ADC in a 64-pin TQFP package. Key Specifications Core MIPS32 M4K, 32-bit, 80MHz (105 DMIPS) Flash Memory 512 KB RAM 64 KB GPIOs 53 ADC 10-bit, 1Msps, 16 […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,25],"tags":[],"chip_brand":[134],"class_list":["post-7860","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-microcontrollers-mcu","chip_brand-microchip"],"acf":{"brief_explanation":"32-bit MIPS MCU, 512KB Flash, 64KB RAM, 80MHz, dual CAN, ETH MAC, USB OTG, TQFP-64","date_code":"","package_case":"TQFP-64 (10 x 10 x 1.2mm, 0.5mm pitch)","in_stock":3280,"datasheet":"https:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/61156H.pdf","price":"$7.85 @ 1ku","product_introduction":"The PIC32MX575F512L-80I\/PT is a high-performance 32-bit microcontroller from Microchip Technology based on the MIPS32 M4K core running at 80MHz (105 DMIPS). It integrates 512KB Flash, 64KB RAM, dual CAN 2.0B controllers, a 10\/100 Ethernet MAC, USB 2.0 OTG, and a 10-bit 1Msps ADC with 16 channels. The Parallel Master Port (PMP) supports 8\/16-bit parallel interface to external memory, LCDs, and other peripherals. Five DMA channels offload data transfers from the CPU. The I-grade is rated for -40\u00b0C to +85\u00b0C industrial temperature range. The 64-pin TQFP package provides 53 GPIOs with 5V-tolerant input capability on most pins.","working_principle":"The PIC32MX575F512L-80I\/PT uses the MIPS32 M4K 5-stage pipeline core with 32x32-bit register file, hardware multiply (1 cycle), and hardware divide (11-33 cycles). The core fetches instructions from Flash through a 4-way set-associative cache that reduces wait states. The bus matrix connects the CPU to Flash, RAM, and peripherals through separate buses for instructions and data (Harvard architecture). The interrupt controller supports 96 interrupt vectors with 4 priority levels and shadow register sets for ultra-low latency ISR entry. The DMA controller handles 5 independent data transfers between peripherals and memory without CPU intervention. The CAN modules implement the full CAN 2.0B protocol with 8 message buffers each and support for CAN FD on newer revisions. The Ethernet MAC implements the IEEE 802.3 MAC layer with MII\/RMII interface to an external PHY, and includes hardware checksum calculation for TCP\/UDP\/IP. The USB OTG module includes the full-speed PHY and supports host, device, and OTG modes with built-in pull-up\/pull-down resistors.","pin_description":"\n
      Pin Group<\/th>Count<\/th>Function<\/th>Description<\/th><\/tr>\n
      GPIO\/Analog<\/td>53<\/td>Digital I\/O \/ ADC<\/td>5V tolerant, multifunction with peripherals<\/td><\/tr>\n
      VDD\/VSS<\/td>Multiple<\/td>Power<\/td>2.0-3.6V supply and ground pairs<\/td><\/tr>\n
      VBUS<\/td>1<\/td>USB<\/td>USB bus voltage detect<\/td><\/tr>\n
      VCAP<\/td>1<\/td>Power<\/td>Internal regulator capacitor (10\u00b5F)<\/td><\/tr>\n
      MCLR<\/td>1<\/td>System<\/td>Master clear (reset, active low)<\/td><\/tr>\n
      OSC1\/OSC2<\/td>2<\/td>Oscillator<\/td>Primary oscillator input\/output<\/td><\/tr>\n
      SOSCI\/SOSCO<\/td>2<\/td>Oscillator<\/td>Secondary (32.768kHz) oscillator<\/td><\/tr>\n
      PGEC1\/PGED1<\/td>2<\/td>Debug<\/td>ICD programming clock\/data<\/td><\/tr>\n<\/table>","application_scenarios":"
        \n
      • Industrial Gateway:<\/strong> Dual CAN and Ethernet MAC enable CAN-to-Ethernet protocol conversion in factory automation<\/li>\n
      • USB Devices:<\/strong> USB 2.0 OTG supports host and device modes for data logging and firmware update applications<\/li>\n
      • Automotive Body:<\/strong> Dual CAN controllers interface with vehicle bus networks; 512KB Flash stores complex firmware<\/li>\n
      • Medical Devices:<\/strong> 10-bit ADC and connectivity options suit patient monitoring with Ethernet data upload<\/li>\n
      • Display Controllers:<\/strong> PMP interface drives LCD modules; DMA transfers frame data without CPU overhead<\/li>\n<\/ul>","alternative_models":"\n
        Model<\/th>Manufacturer<\/th>Key Difference<\/th>Package<\/th>Specs<\/th><\/tr>\n
        PIC32MX575F256L-80I\/PT<\/td>Microchip<\/td>256KB Flash, lower cost<\/td>-<\/td>-<\/td><\/tr>\n
        PIC32MX575F512H-80I\/PT<\/td>Microchip<\/td>Same without CAN controllers<\/td>-<\/td>-<\/td><\/tr>\n
        PIC32MX795F512L-80I\/PT<\/td>Microchip<\/td>256KB additional USB RAM, crypto engine<\/td>-<\/td>-<\/td><\/tr>\n
        SAM7X512<\/td>Microchip<\/td>ARM7, 512KB Flash, Ethernet+CAN, LQFP-64<\/td>-<\/td>-<\/td><\/tr>\n
        STM32F407VET6<\/td>ST<\/td>Cortex-M4, 512KB Flash, FPU, LQFP-100<\/td>-<\/td>-<\/td><\/tr>\n<\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7860","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=7860"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7860\/revisions"}],"predecessor-version":[{"id":8279,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7860\/revisions\/8279"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=7860"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=7860"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=7860"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=7860"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}