{"id":7859,"date":"2026-06-28T03:00:48","date_gmt":"2026-06-28T03:00:48","guid":{"rendered":"https:\/\/materialparts.com\/iso7720dr\/"},"modified":"2026-06-28T10:20:05","modified_gmt":"2026-06-28T10:20:05","slug":"iso7720dr","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/iso7720dr\/","title":{"rendered":"ISO7720DR"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The ISO7720DR is a dual-channel reinforced digital isolator from Texas Instruments with 5000VRMS isolation, 100Mbps data rate, and >100kV\/\u00b5s CMTI in an SOIC-8 package.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>N\u00famero de canales<\/td>\n<td>2<\/td>\n<\/tr>\n<tr>\n<td>Channel Direction<\/td>\n<td>Both same direction (ISO7720)<\/td>\n<\/tr>\n<tr>\n<td>Isolation Rating<\/td>\n<td>5000 VRMS (reinforced), 8000 Vpeak transient<\/td>\n<\/tr>\n<tr>\n<td>Velocidad de datos<\/td>\n<td>0 to 100Mbps (NRZ)<\/td>\n<\/tr>\n<tr>\n<td>Retardo de propagaci\u00f3n<\/td>\n<td>10.5ns typical<\/td>\n<\/tr>\n<tr>\n<td>Distorsi\u00f3n de la anchura de impulsos<\/td>\n<td>2ns typical<\/td>\n<\/tr>\n<tr>\n<td>CMTI<\/td>\n<td>>100kV\/\u00b5s<\/td>\n<\/tr>\n<tr>\n<td>Tensi\u00f3n de alimentaci\u00f3n<\/td>\n<td>2.25V to 5.5V per side<\/td>\n<\/tr>\n<tr>\n<td>Supply Current (per channel)<\/td>\n<td>1.5mA typical at 5V, 1Mbps<\/td>\n<\/tr>\n<tr>\n<td>Temperatura de funcionamiento<\/td>\n<td>-40\u00b0C to +125\u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Safety Ratings<\/td>\n<td>UL 1577, CSA, IEC 60747-17, VDE<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>SOIC-8 (wide body, 7.5mm)<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>Reinforced isolation: 5000VRMS for 1 minute<\/li>\n<li>High CMTI: >100kV\/\u00b5s for noise immunity<\/li>\n<li>100Mbps data rate supports high-speed interfaces<\/li>\n<li>Low propagation delay: 10.5ns typical<\/li>\n<li>Dual supply: 2.25V to 5.5V on each side independently<\/li>\n<li>Level translation across isolation barrier<\/li>\n<li>Robust EMC performance for industrial environments<\/li>\n<li>Default output state: low when input power is lost<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Industrial automation and PLC isolation<\/li>\n<li>SPI and UART communication isolation<\/li>\n<li>Motor drive gate driver isolation<\/li>\n<li>Medical equipment galvanic isolation<\/li>\n<li>Power supply feedback loop isolation<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The ISO7720DR is a dual-channel reinforced digital isolator from Texas Instruments with 5000VRMS isolation, 100Mbps data rate, and >100kV\/\u00b5s CMTI in an SOIC-8 package. Key Specifications Number of Channels 2 Channel Direction Both same direction (ISO7720) Isolation Rating 5000 VRMS (reinforced), 8000 Vpeak transient Data Rate 0 to 100Mbps (NRZ) Propagation Delay 10.5ns [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[138],"class_list":["post-7859","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-ti"],"acf":{"brief_explanation":"Dual-channel reinforced digital isolator, 5000VRMS, 100Mbps, >100kV\/\u00b5s CMTI, SOIC-8","date_code":"","package_case":"SOIC-8 Wide (7.5 x 5.85 x 2.35mm, 1.27mm pitch)","in_stock":5420,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/iso7720.pdf","price":"$2.45 @ 1ku","product_introduction":"The ISO7720DR is a dual-channel reinforced digital isolator from Texas Instruments using silicon dioxide (SiO2) insulation to provide 5000VRMS galvanic isolation. It supports data rates up to 100Mbps with only 10.5ns typical propagation delay and >100kV\/\u00b5s common-mode transient immunity. The device operates with independent 2.25V to 5.5V supplies on each side, enabling voltage level translation across the isolation barrier. The ISO7720 variant has both channels in the same direction. The device meets UL 1577, IEC 60747-17, and VDE safety standards for reinforced isolation, making it suitable for industrial and medical applications.","working_principle":"The ISO7720DR uses TI's silicon dioxide (SiO2) isolation technology with on-chip capacitive coupling. Each channel consists of a transmitter on one side of the isolation barrier and a receiver on the other side. The transmitter encodes the input logic state into high-frequency RF pulses (several GHz carrier) that are capacitively coupled across the thin SiO2 dielectric to the receiver. The receiver decodes the RF signal and reproduces the original logic state. The SiO2 dielectric provides both electrical isolation (5000VRMS breakdown) and a low-loss coupling path for the RF signal. The high CMTI (>100kV\/\u00b5s) results from the differential coupling architecture that rejects common-mode transients. When the input side loses power, the receiver output assumes a defined default state (low) to prevent undefined operation. The 10.5ns propagation delay is achieved by the high-speed RF modulation and demodulation, supporting 100Mbps NRZ data. The independent supply domains on each side allow voltage level translation, for example converting 3.3V logic on one side to 5V logic on the other.","pin_description":"<table border=\"1\" cellpadding=\"4\">\n<tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Description<\/th><\/tr>\n<tr><td>1<\/td><td>VCC1<\/td><td>Power<\/td><td>Side 1 supply (2.25V-5.5V)<\/td><\/tr>\n<tr><td>2<\/td><td>IN1<\/td><td>Input<\/td><td>Channel 1 logic input (side 1)<\/td><\/tr>\n<tr><td>3<\/td><td>OUT2<\/td><td>Output<\/td><td>Channel 2 logic output (side 1)<\/td><\/tr>\n<tr><td>4<\/td><td>GND1<\/td><td>Power<\/td><td>Side 1 ground<\/td><\/tr>\n<tr><td>5<\/td><td>GND2<\/td><td>Power<\/td><td>Side 2 ground<\/td><\/tr>\n<tr><td>6<\/td><td>IN2<\/td><td>Input<\/td><td>Channel 2 logic input (side 2)<\/td><\/tr>\n<tr><td>7<\/td><td>OUT1<\/td><td>Output<\/td><td>Channel 1 logic output (side 2)<\/td><\/tr>\n<tr><td>8<\/td><td>VCC2<\/td><td>Power<\/td><td>Side 2 supply (2.25V-5.5V)<\/td><\/tr>\n<\/table>","application_scenarios":"<ul>\n<li><strong>Industrial PLC:<\/strong> 5000VRMS reinforced isolation protects operators and equipment from high-voltage faults in PLC I\/O modules<\/li>\n<li><strong>SPI Isolation:<\/strong> 100Mbps data rate isolates SPI clocks and data lines in motor drive and power converter systems<\/li>\n<li><strong>Medical Equipment:<\/strong> IEC 60747-17 reinforced isolation meets patient safety requirements in medical monitoring devices<\/li>\n<li><strong>Motor Drives:<\/strong> >100kV\/\u00b5s CMTI prevents data corruption from high dV\/dt switching transients in inverter gate driver interfaces<\/li>\n<li><strong>Level Translation:<\/strong> Independent 2.25-5.5V supplies on each side translate logic levels across the isolation barrier<\/li>\n<\/ul>","alternative_models":"<table border=\"1\" cellpadding=\"4\">\n<tr><th>Model<\/th><th>Manufacturer<\/th><th>Key Difference<\/th><th>Package<\/th><th>Specs<\/th><\/tr>\n<tr><td>ISO7721DR<\/td><td>TI<\/td><td>Opposite direction channels (1 forward, 1 reverse)<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>ISO7720FD<\/td><td>TI<\/td><td>Failsafe high output default state<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>ADuM1200BRZ<\/td><td>ADI<\/td><td>Dual-channel, 5kVRMS, SOIC-8<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>Si8620BB-IS<\/td><td>Skyworks\/Silicon Labs<\/td><td>Dual-channel, 5kVRMS, 150Mbps<\/td><td>-<\/td><td>-<\/td><\/tr>\n<tr><td>CNL7220BIW-SN<\/td><td>CEL<\/td><td>Dual-channel, 5kVRMS, SOIC-8<\/td><td>-<\/td><td>-<\/td><\/tr>\n<\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7859","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=7859"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7859\/revisions"}],"predecessor-version":[{"id":8280,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7859\/revisions\/8280"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=7859"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=7859"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=7859"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=7859"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}