{"id":7809,"date":"2026-06-27T03:35:12","date_gmt":"2026-06-27T03:35:12","guid":{"rendered":"https:\/\/materialparts.com\/max3232ese-3\/"},"modified":"2026-06-27T03:35:12","modified_gmt":"2026-06-27T03:35:12","slug":"max3232ese-3","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/max3232ese-3\/","title":{"rendered":"MAX3232ESE+"},"content":{"rendered":"

Productos<\/h2>\n

The MAX3232ESE+ is a 3.0V to 5.5V dual RS-232 transceiver from Analog Devices with \u00b115 kV ESD protection, two drivers and two receivers, 250 kbps data rate, and 300 \u00b5A typical supply current in a 16-pin SOIC package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n
Configuraci\u00f3n<\/td>\n2 Drivers \/ 2 Receivers<\/td>\n<\/tr>\n
Protocol<\/td>\nTIA\/EIA-232-F, ITU V.28<\/td>\n<\/tr>\n
Velocidad de datos<\/td>\n250 kbps (up to 1 Mbps in MegaBaud mode)<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n3.0 V to 5.5 V<\/td>\n<\/tr>\n
ESD Protection<\/td>\n\u00b115 kV HBM, \u00b115 kV IEC air-gap, \u00b18 kV IEC contact<\/td>\n<\/tr>\n
Supply Current<\/td>\n300 \u00b5A typical (unloaded)<\/td>\n<\/tr>\n
External Capacitors<\/td>\n4 x 0.1 \u00b5F<\/td>\n<\/tr>\n
Driver Output Slew Rate<\/td>\n30 V\/\u00b5s max<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to +85\u00b0C<\/td>\n<\/tr>\n
Paquete<\/td>\nSOIC-16 (narrow)<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Operates from single 3.0V to 5.5V supply<\/li>\n
  • Integrated dual charge pump (4 external capacitors)<\/li>\n
  • \u00b115 kV ESD protection on all RS-232 pins<\/li>\n
  • Low supply current: 300 \u00b5A typical<\/li>\n
  • 5V logic input with 3.3V supply<\/li>\n
  • Pin compatible with industry-standard MAX232<\/li>\n
  • Fail-safe receiver: open input = logic high<\/li>\n
  • Outputs protected against shorts to ground<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Industrial PCs and wired networking<\/li>\n
    • Battery-powered systems and handheld devices<\/li>\n
    • Data center and enterprise computing<\/li>\n
    • Notebook and palmtop computers<\/li>\n
    • Embedded RS-232 communication<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The MAX3232ESE+ is a 3.0V to 5.5V dual RS-232 transceiver from Analog Devices with \u00b115 kV ESD protection, two drivers and two receivers, 250 kbps data rate, and 300 \u00b5A typical supply current in a 16-pin SOIC package. Key Specifications Configuration 2 Drivers \/ 2 Receivers Protocol TIA\/EIA-232-F, ITU V.28 Data Rate 250 […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[165],"class_list":["post-7809","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-adi"],"acf":{"brief_explanation":"3.0-5.5V dual RS-232 transceiver, \u00b115kV ESD, 250kbps, SOIC-16","date_code":"","package_case":"SOIC-16 (narrow, 3.9 x 9.9 mm)","in_stock":7650,"datasheet":"https:\/\/www.analog.com\/media\/en\/technical-documentation\/data-sheets\/MAX3222-MAX3241.pdf","price":"$5.49 @ 1ku","product_introduction":"The MAX3232ESE+ is a dual RS-232 transceiver from Analog Devices consisting of two line drivers, two line receivers, and a dual charge-pump circuit with \u00b115 kV IEC ESD protection on all RS-232 pins. It meets TIA\/EIA-232-F and ITU V.28 standards, providing the electrical interface between asynchronous communication controllers and serial-port connectors. The charge pump and four 0.1 \u00b5F external capacitors enable operation from a single 3.0V to 5.5V supply. The device supports data rates up to 250 kbps with a maximum driver output slew rate of 30 V\/\u00b5s. It accepts 5V logic inputs with a 3.3V supply and features fail-safe receiver outputs that go high when inputs are open.","working_principle":"The MAX3232ESE+ uses an internal dual charge pump to generate the positive and negative supply voltages required for RS-232 signal levels from a single 3.0-5.5V supply. The first charge pump doubles VCC to create V+ (approximately +5.5V), and the second inverts V+ to create V- (approximately -5.5V). These generated voltages power the driver outputs, which swing between +5.5V and -5.5V to meet the RS-232 specification of \u00b13V minimum with 5 kOhm load. The receivers convert RS-232 input levels (\u00b13V to \u00b115V) to TTL\/CMOS output levels. A 5 kOhm pulldown resistor on each receiver input ensures the output goes high when the input is open (fail-safe). The ESD protection structures on RS-232 pins use SCR-based clamping to absorb transient energy up to \u00b115 kV per IEC 61000-4-2 without latchup.","pin_description":"\n
      Pin<\/th>Name<\/th>Type<\/th>Description<\/th><\/tr>\n
      1<\/td>C1+<\/td>Passive<\/td>Positive terminal of voltage doubler capacitor<\/td><\/tr>\n
      2<\/td>V+<\/td>Power<\/td>+5.5V output from charge pump<\/td><\/tr>\n
      3<\/td>C1-<\/td>Passive<\/td>Negative terminal of voltage doubler capacitor<\/td><\/tr>\n
      4<\/td>C2+<\/td>Passive<\/td>Positive terminal of inverting capacitor<\/td><\/tr>\n
      5<\/td>C2-<\/td>Passive<\/td>Negative terminal of inverting capacitor<\/td><\/tr>\n
      6<\/td>V-<\/td>Power<\/td>-5.5V output from charge pump<\/td><\/tr>\n
      7<\/td>DOUT2<\/td>Output<\/td>RS-232 driver 2 output<\/td><\/tr>\n
      8<\/td>RIN2<\/td>Input<\/td>RS-232 receiver 2 input<\/td><\/tr>\n
      9<\/td>ROUT2<\/td>Output<\/td>TTL\/CMOS receiver 2 output<\/td><\/tr>\n
      10<\/td>DIN2<\/td>Input<\/td>TTL\/CMOS driver 2 input<\/td><\/tr>\n
      11<\/td>DIN1<\/td>Input<\/td>TTL\/CMOS driver 1 input<\/td><\/tr>\n
      12<\/td>ROUT1<\/td>Output<\/td>TTL\/CMOS receiver 1 output<\/td><\/tr>\n
      13<\/td>RIN1<\/td>Input<\/td>RS-232 receiver 1 input<\/td><\/tr>\n
      14<\/td>DOUT1<\/td>Output<\/td>RS-232 driver 1 output<\/td><\/tr>\n
      15<\/td>GND<\/td>Power<\/td>Ground<\/td><\/tr>\n
      16<\/td>VCC<\/td>Power<\/td>Supply voltage (3.0V to 5.5V)<\/td><\/tr>\n<\/table>","application_scenarios":"
        \n
      • Embedded RS-232:<\/strong> Industry-standard dual transceiver adds serial ports to any 3.3V or 5V microcontroller system<\/li>\n
      • Industrial PCs:<\/strong> \u00b115 kV ESD protection withstands electrostatic discharge from frequently connected serial cables<\/li>\n
      • Battery-Powered Devices:<\/strong> 300 \u00b5A supply current and charge pump operation from 3.0V minimize battery drain<\/li>\n
      • Legacy Interface:<\/strong> Converts modern 3.3V logic to RS-232 levels for communication with older equipment and test instruments<\/li>\n
      • Data Center Equipment:<\/strong> Reliable serial management interface with IEC ESD protection for server and networking equipment<\/li>\n<\/ul>","alternative_models":"\n
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>\n
        MAX3232CSE+<\/td>ADI<\/td>Commercial temp (0-70\u00b0C), lower ESD rating<\/td><\/tr>\n
        SP3232EEN-L\/TR<\/td>MaxLinear<\/td>Pin-compatible, 3.0-5.5V, 250kbps<\/td><\/tr>\n
        ST3232EBDR<\/td>ST<\/td>3.0-5.5V, 400kbps, SOIC-16<\/td><\/tr>\n
        SN65C3232EDWR<\/td>TI<\/td>1 Mbps, extended temp, pin-compatible<\/td><\/tr>\n
        MAX3222ESE+<\/td>ADI<\/td>With shutdown and auto-powerdown (1 \u00b5A)<\/td><\/tr>\n<\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7809","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=7809"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7809\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=7809"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=7809"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=7809"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=7809"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}