{"id":7146,"date":"2026-06-23T05:43:29","date_gmt":"2026-06-23T05:43:29","guid":{"rendered":"https:\/\/materialparts.com\/tps54060adgq\/"},"modified":"2026-06-23T05:43:29","modified_gmt":"2026-06-23T05:43:29","slug":"tps54060adgq","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/tps54060adgq\/","title":{"rendered":"TPS54060ADGQ"},"content":{"rendered":"

Productos<\/h2>\n

The TPS54060ADGQ from Texas Instruments is a 0.5A, 60V step-down DC-DC converter with integrated high-side MOSFET in an MSOP-10 PowerPAD package. Featuring Eco-Mode for high light-load efficiency, it targets industrial and automotive power supply applications.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n
Input Voltage<\/td>\n3.5 V to 60 V<\/td>\n<\/tr>\n
Corriente de salida<\/td>\n0.5 A<\/td>\n<\/tr>\n
High-Side MOSFET RDS(on)<\/td>\n200 mOhm<\/td>\n<\/tr>\n
Switching Frequency<\/td>\n100 kHz to 2.5 MHz (adjustable)<\/td>\n<\/tr>\n
Corriente de reposo<\/td>\n116 uA (Eco-Mode)<\/td>\n<\/tr>\n
Shutdown Current<\/td>\n1.3 uA<\/td>\n<\/tr>\n
Reference Voltage<\/td>\n0.8 V<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40C to +125C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • 60V maximum input for industrial and automotive rails<\/li>\n
  • 200mOhm integrated high-side MOSFET for high efficiency<\/li>\n
  • Eco-Mode pulse skipping for 116uA light-load quiescent current<\/li>\n
  • Adjustable switching frequency 100kHz to 2.5MHz via RT\/CLK pin<\/li>\n
  • Internal slow-start with adjustable sequencing\/tracking<\/li>\n
  • Power Good output for supply monitoring<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • 12V\/24V\/48V industrial power supply buck regulators<\/li>\n
    • Automotive aftermarket accessories<\/li>\n
    • Telecom and networking point-of-load converters<\/li>\n
    • Battery-powered and energy-harvesting systems<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The TPS54060ADGQ from Texas Instruments is a 0.5A, 60V step-down DC-DC converter with integrated high-side MOSFET in an MSOP-10 PowerPAD package. Featuring Eco-Mode for high light-load efficiency, it targets industrial and automotive power supply applications. Key Specifications Input Voltage 3.5 V to 60 V Output Current 0.5 A High-Side MOSFET RDS(on) 200 mOhm […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[31,13],"tags":[],"chip_brand":[138],"class_list":["post-7146","post","type-post","status-publish","format-standard","hentry","category-dc-dc-converters","category-integrated-circuits-ics","chip_brand-ti"],"acf":{"brief_explanation":"0.5A, 60V buck converter, 200mOhm MOSFET, Eco-Mode, 100kHz-2.5MHz, MSOP-10","date_code":"","package_case":"MSOP-10 PowerPAD (3.00 x 3.00 x 0.90 mm)","in_stock":6838,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/tps54060a.pdf","price":"$1.85 @ 1ku","product_introduction":"The TPS54060ADGQ from Texas Instruments is a 60V, 0.5A step-down DC-DC converter with an integrated 200mOhm high-side N-channel MOSFET in an MSOP-10 PowerPAD package. The device operates from 3.5V to 60V input and provides an adjustable output down to 0.8V at up to 0.5A. Current-mode control simplifies external compensation and provides flexible component selection. Eco-Mode pulse skipping reduces no-load regulated output supply current to 116uA for energy-efficient light-load operation. The switching frequency is adjustable from 100kHz to 2.5MHz via a resistor on the RT\/CLK pin, and the device can be synchronized to an external clock via the internal PLL. A Power Good open-drain output indicates when the output is within 93% to 107% of nominal voltage. Internal slow-start minimizes inrush current and can be configured for power-supply sequencing or tracking.","working_principle":"The TPS54060ADGQ uses a current-mode control architecture for stable regulation. (1) Power Stage: The integrated 200mOhm high-side N-channel MOSFET switches the input voltage to the output inductor. An external boot capacitor between BOOT and PH provides gate drive voltage above VIN. (2) Current-Mode Control: An inner current loop senses the MOSFET current and compares it to the voltage error amplifier output. This provides cycle-by-cycle current limiting and simplifies frequency compensation. (3) Eco-Mode: At light loads, the device enters pulse-skipping mode where the controller delivers a single on-pulse and then enters a low-power state until the output falls below the threshold. This reduces the effective switching frequency and quiescent current to 116uA. (4) Synchronization: The RT\/CLK pin accepts an external clock for frequency synchronization. An internal PLL locks the switching frequency to the external clock falling edge. (5) Slow-Start: An external capacitor on the SS\/TR pin programs the startup ramp time. The pin can also be used for output voltage tracking during sequencing.","pin_description":"
      Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      1<\/td>BOOT<\/td>I\/O<\/td>Bootstrap capacitor for high-side gate drive<\/td><\/tr>
      2<\/td>VIN<\/td>Power<\/td>Input supply (3.5-60V)<\/td><\/tr>
      3<\/td>EN<\/td>Input<\/td>Enable (internal pull-up, float to enable)<\/td><\/tr>
      4<\/td>SS\/TR<\/td>I\/O<\/td>Slow-start \/ tracking capacitor<\/td><\/tr>
      5<\/td>VSENSE<\/td>Input<\/td>Feedback voltage (0.8V reference)<\/td><\/tr>
      6<\/td>COMP<\/td>I\/O<\/td>Error amplifier output \/ compensation<\/td><\/tr>
      7<\/td>GND<\/td>Ground<\/td>Ground (PowerPAD)<\/td><\/tr>
      8<\/td>RT\/CLK<\/td>I\/O<\/td>Frequency set resistor \/ sync clock input<\/td><\/tr>
      9<\/td>PWRGD<\/td>Output<\/td>Power good (open-drain)<\/td><\/tr>
      10<\/td>PH<\/td>Output<\/td>Switch node (connect to inductor)<\/td><\/tr><\/table>","application_scenarios":"
      • 12V\/24V\/48V industrial power supply buck regulators with 60V input range<\/li>
      • Automotive aftermarket accessories (GPS, video, entertainment) with Eco-Mode<\/li>
      • Telecom and networking point-of-load converters at up to 2.5MHz<\/li>
      • Battery-powered systems with 1.3uA shutdown current<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        TI<\/td>TPS54160ADGQ<\/td>MSOP-10<\/td>1.5A version, same family<\/td><\/tr>
        TI<\/td>LM5017<\/td>WSON-12<\/td>100V, 0.6A buck<\/td><\/tr>
        Monolithic Power<\/td>MP8759GD-Z<\/td>SOIC-8<\/td>60V, 0.5A, similar<\/td><\/tr>
        Richtek<\/td>RT6200GQW<\/td>DFN-10<\/td>60V, 0.5A buck<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7146","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=7146"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/7146\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=7146"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=7146"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=7146"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=7146"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}