{"id":6831,"date":"2026-06-21T12:49:07","date_gmt":"2026-06-21T12:49:07","guid":{"rendered":"https:\/\/materialparts.com\/tpa3116d2dadr\/"},"modified":"2026-06-21T12:49:07","modified_gmt":"2026-06-21T12:49:07","slug":"tpa3116d2dadr","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/tpa3116d2dadr\/","title":{"rendered":"TPA3116D2DADR"},"content":{"rendered":"

Productos<\/h2>\n

The TPA3116D2DADR from Texas Instruments is a 50W stereo class-D audio amplifier with single-ended or BTL output, programmable power limiting, and 92% efficiency in an HTSSOP-32 package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Tipo<\/td>\nStereo Class-D Audio Power Amplifier<\/td>\n<\/tr>\n
Output Power<\/td>\n50W x 2 (BTL, 24V, 4 Ohm)<\/td>\n<\/tr>\n
Output Configuration<\/td>\nSE (stereo) or BTL (mono\/bridge-tied)<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n8 V to 26 V<\/td>\n<\/tr>\n
Efficiency<\/td>\n92% (typical)<\/td>\n<\/tr>\n
THD+N<\/td>\n0.05% @ 15W, 1kHz<\/td>\n<\/tr>\n
SNR<\/td>\n105 dB<\/td>\n<\/tr>\n
Power Limit<\/td>\nProgrammable via external resistor<\/td>\n<\/tr>\n
Gain<\/td>\n20, 26, 32, 36 dB (selectable)<\/td>\n<\/tr>\n
Switching Frequency<\/td>\n1.2 MHz (adjustable)<\/td>\n<\/tr>\n
Paquete<\/td>\nHTSSOP-32 (PowerPAD)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40C to +85C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • 50W per channel stereo BTL output<\/li>\n
  • 92% efficiency eliminates need for heatsink<\/li>\n
  • Programmable power limiting for speaker protection<\/li>\n
  • Four gain settings (20\/26\/32\/36 dB)<\/li>\n
  • Single-ended or bridge-tied load operation<\/li>\n
  • Integrated self-protection (thermal, overcurrent, short circuit)<\/li>\n
  • Auto-recovery from faults<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Bluetooth speaker amplifiers<\/li>\n
    • Home theater sound bars<\/li>\n
    • TV and monitor internal speakers<\/li>\n
    • Powered bookshelf and desktop speakers<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The TPA3116D2DADR from Texas Instruments is a 50W stereo class-D audio amplifier with single-ended or BTL output, programmable power limiting, and 92% efficiency in an HTSSOP-32 package. Key Specifications Type Stereo Class-D Audio Power Amplifier Output Power 50W x 2 (BTL, 24V, 4 Ohm) Output Configuration SE (stereo) or BTL (mono\/bridge-tied) Supply Voltage […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[19,13],"tags":[],"chip_brand":[138],"class_list":["post-6831","post","type-post","status-publish","format-standard","hentry","category-analog-linear-ics","category-integrated-circuits-ics","chip_brand-ti"],"acf":{"brief_explanation":"50W Stereo Class-D Audio Amp, 8-26V, 92% Efficiency, Power Limiting, HTSSOP-32","date_code":"","package_case":"HTSSOP-32 (PowerPAD) (9.7 x 6.4 x 1.2 mm)","in_stock":6789,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/tpa3116d2.pdf","price":"$3.50 @ 1ku","product_introduction":"The TPA3116D2DADR from Texas Instruments is a high-efficiency stereo class-D audio power amplifier capable of delivering up to 50W per channel into 4 Ohm speakers from a 24V supply in BTL configuration. The 92% typical efficiency eliminates the need for a heatsink in many applications. The programmable power limiting feature uses an external resistor to set the maximum output power, protecting speakers from damage at high supply voltages. Four gain settings (20, 26, 32, 36 dB) are selectable via two gain pins. The device supports both single-ended (stereo) and bridge-tied load (mono or stereo) output configurations. Integrated protection circuits include thermal shutdown, overcurrent protection, and short-circuit protection with automatic recovery. The high 1.2 MHz switching frequency allows use of small output filter inductors.","working_principle":"The TPA3116D2DADR uses a PWM (pulse-width modulation) class-D architecture. The audio input signal is compared with a 1.2 MHz triangle wave in a comparator to generate a PWM signal whose duty cycle is proportional to the instantaneous input voltage. This PWM signal drives a half-bridge (SE mode) or full-bridge (BTL mode) power output stage consisting of low-RDS(on) MOSFETs. An external LC low-pass filter on the output reconstructs the audio signal by removing the switching frequency and its harmonics. In BTL mode, two half-bridges drive the speaker differentially, doubling the voltage swing across the load and providing 4x the output power compared to SE mode with the same supply. The programmable power limiter monitors the output signal level and reduces the duty cycle when it exceeds the threshold set by the PLIMIT resistor, providing speaker protection. The high 92% efficiency is achieved because the output MOSFETs operate as switches (fully on or fully off), dissipating very little power compared to linear amplifiers where the output transistors operate in their linear region.","pin_description":"
      Pin Group<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      Dedicated<\/td>IN_A\/IN_B<\/td>Input<\/td>Audio inputs (differential)<\/td><\/tr>
      Multiple<\/td>OUT_A\/OUT_B<\/td>Output<\/td>PWM outputs to LC filter<\/td><\/tr>
      Dedicated<\/td>PVCC\/AVCC<\/td>Power<\/td>8-26V power supply<\/td><\/tr>
      Dedicated<\/td>GAIN0\/GAIN1<\/td>Input<\/td>Gain selection pins<\/td><\/tr>
      Dedicated<\/td>SD\/MUTE<\/td>Input<\/td>Shutdown and mute control<\/td><\/tr>
      Dedicated<\/td>PLIMIT<\/td>Input<\/td>Power limit set resistor<\/td><\/tr>
      Dedicated<\/td>FAULT<\/td>Output<\/td>Fault status output<\/td><\/tr>
      Dedicated<\/td>GVDD<\/td>Power<\/td>Gate drive supply (7V internal)<\/td><\/tr><\/table>","application_scenarios":"
      • Bluetooth speaker with 50W+50W stereo output from 24V adapter<\/li>
      • 2.1 channel sound bar with two 20W satellites + one 50W subwoofer<\/li>
      • Desktop powered speaker pair with SE output and 15W per channel<\/li>
      • TV internal 10W+10W speaker amplifier with no heatsink<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        TI<\/td>TPA3118D2DADR<\/td>HTSSOP-32<\/td>30W version, lower supply range<\/td><\/tr>
        TI<\/td>TPA3123D2PWPR<\/td>HTSSOP-28<\/td>25W, lower cost<\/td><\/tr>
        TI<\/td>TPA3251D2<\/td>TQFP-48<\/td>175W, high-end, PurePath<\/td><\/tr>
        Infineon<\/td>MA5332MS<\/td>QFN-32<\/td>60W, similar class<\/td><\/tr>
        Analog Devices<\/td>SSM2529<\/td>LQFP-48<\/td>2x15W, I2C control<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6831","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=6831"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6831\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=6831"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=6831"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=6831"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=6831"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}