{"id":6774,"date":"2026-06-21T10:47:56","date_gmt":"2026-06-21T10:47:56","guid":{"rendered":"https:\/\/materialparts.com\/mx25l12835fm2i-10g\/"},"modified":"2026-06-21T10:47:56","modified_gmt":"2026-06-21T10:47:56","slug":"mx25l12835fm2i-10g","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/mx25l12835fm2i-10g\/","title":{"rendered":"MX25L12835FM2I-10G"},"content":{"rendered":"

Productos<\/h2>\n

The MX25L12835FM2I-10G from Macronix is a 128 Mbit (16 MB) serial NOR flash memory with quad SPI interface, 133 MHz clock, and dual\/quad I\/O modes in a 16-pin SOIC package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Tipo<\/td>\nSerial NOR Flash Memory (Quad SPI)<\/td>\n<\/tr>\n
Densidad<\/td>\n128 Mbit (16 MB)<\/td>\n<\/tr>\n
Interface<\/td>\nStandard\/Dual\/Quad SPI<\/td>\n<\/tr>\n
Max Clock Frequency<\/td>\n133 MHz (quad I\/O)<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n2.7 V to 3.6 V<\/td>\n<\/tr>\n
Sector Size<\/td>\n4 KB<\/td>\n<\/tr>\n
Block Size<\/td>\n64 KB \/ 32 KB<\/td>\n<\/tr>\n
Page Size<\/td>\n256 bytes<\/td>\n<\/tr>\n
Endurance<\/td>\n100,000 program\/erase cycles<\/td>\n<\/tr>\n
Data Retention<\/td>\n20 years<\/td>\n<\/tr>\n
Paquete<\/td>\nSOIC-16 (300 mil)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40C to 85C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Quad SPI for 4x throughput over standard SPI<\/li>\n
  • 133 MHz clock in quad I\/O mode (532 Mbps)<\/li>\n
  • 4 KB sectors and 32\/64 KB blocks<\/li>\n
  • Secured OTP and 64-bit unique ID<\/li>\n
  • Hardware write protection and hold pin<\/li>\n
  • XIP (eXecute In Place) support<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Embedded system boot code and firmware storage<\/li>\n
    • Automotive infotainment and ADAS firmware<\/li>\n
    • Industrial equipment program storage<\/li>\n
    • Networking and telecom equipment boot flash<\/li>\n
    • Consumer electronics firmware and data logging<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The MX25L12835FM2I-10G from Macronix is a 128 Mbit (16 MB) serial NOR flash memory with quad SPI interface, 133 MHz clock, and dual\/quad I\/O modes in a 16-pin SOIC package. Key Specifications Type Serial NOR Flash Memory (Quad SPI) Density 128 Mbit (16 MB) Interface Standard\/Dual\/Quad SPI Max Clock Frequency 133 MHz (quad […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13],"tags":[],"chip_brand":[164],"class_list":["post-6774","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","chip_brand-macronix"],"acf":{"brief_explanation":"128Mbit Quad SPI NOR Flash, 133MHz, 532Mbps, SOIC-16, 2.7-3.6V","date_code":"","package_case":"SOIC-16 (10.3 x 7.5 x 2.3 mm, 300 mil)","in_stock":5432,"datasheet":"https:\/\/www.macronix.com\/en-us\/products\/NOR-Flash\/Serial-NOR-Flash\/Pages\/spec.aspx?p=MX25L12835F&m=Serial+NOR+Flash&n=PM2612","price":"$1.95 @ 1ku","product_introduction":"The MX25L12835FM2I-10G from Macronix is a 128 Mbit (16 MByte) serial NOR flash memory supporting standard SPI, dual-output SPI, and quad-output SPI interfaces. In quad I\/O mode at 133 MHz, the device achieves 532 Mbps throughput, making it suitable for eXecute-In-Place (XIP) applications where code is executed directly from flash without copying to RAM. The device provides flexible erase granularity with 4 KB sectors, 32 KB half-blocks, and 64 KB blocks. Secured OTP (One-Time Programmable) area and a 64-bit unique ID support secure provisioning. The device supports deep power-down mode with 5 uA typical current for battery-sensitive applications.","working_principle":"The MX25L12835FM2I-10G is accessed through an SPI-compatible serial interface using Chip Select (CS#), Serial Clock (SCLK), and data pins (SI, SO, SIO2, SIO3). In standard SPI mode, only SI and SO are used for data transfer. In dual-output mode, both SI and SO output data on consecutive clock edges. In quad I\/O mode, all four data pins transfer data simultaneously, achieving 4x throughput. Commands are issued by asserting CS# low and clocking in the command byte followed by address and data. The quad enable (QE) bit in the status register must be set before using quad SPI modes. The internal 256-byte page buffer allows page program operations. Erase operations clear 4 KB sectors, 32 KB half-blocks, or 64 KB blocks to all 1s. The device supports XIP with continuous read mode that reduces command overhead for sequential access patterns.","pin_description":"
      Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      1<\/td>CS#<\/td>Input<\/td>Chip select (active low)<\/td><\/tr>
      2<\/td>SO\/SIO1<\/td>I\/O<\/td>Serial output \/ Quad-SIO1<\/td><\/tr>
      3<\/td>WP#\/SIO2<\/td>I\/O<\/td>Write protect \/ Quad-SIO2<\/td><\/tr>
      4<\/td>VSS<\/td>Ground<\/td>Ground<\/td><\/tr>
      5<\/td>SI\/SIO0<\/td>I\/O<\/td>Serial input \/ Quad-SIO0<\/td><\/tr>
      6<\/td>SCLK<\/td>Input<\/td>Serial clock<\/td><\/tr>
      7<\/td>HOLD#\/SIO3<\/td>I\/O<\/td>Hold \/ Quad-SIO3<\/td><\/tr>
      8<\/td>VDD<\/td>Power<\/td>Power supply (2.7-3.6V)<\/td><\/tr>
      9-16<\/td>DNU\/VSS<\/td>-\/Ground<\/td>Do not use \/ additional ground<\/td><\/tr><\/table>","application_scenarios":"
      • Automotive head unit firmware and navigation map storage<\/li>
      • Industrial PLC and HMI program flash with XIP execution<\/li>
      • Networking switch and router boot code storage<\/li>
      • ADAS sensor processor firmware with fast boot requirements<\/li>
      • Consumer smart TV and set-top box main firmware storage<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        Macronix<\/td>MX25L12833FM2I-08G<\/td>SOIC-16<\/td>Same density, 86MHz quad-SPI<\/td><\/tr>
        Winbond<\/td>W25Q128JVSFIQ<\/td>SOIC-16<\/td>128Mbit, 133MHz, quad-SPI<\/td><\/tr>
        ISSI<\/td>IS25LP128FJKLE<\/td>SOIC-16<\/td>128Mbit, 133MHz, quad-SPI<\/td><\/tr>
        GigaDevice<\/td>GD25Q128CEM2IR<\/td>SOIC-16<\/td>128Mbit, 120MHz, quad-SPI<\/td><\/tr>
        Infineon<\/td>S25FL128LAGMFI010<\/td>SOIC-16<\/td>128Mbit, 133MHz, quad-SPI<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6774","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=6774"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6774\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=6774"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=6774"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=6774"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=6774"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}