{"id":6758,"date":"2026-06-21T10:21:30","date_gmt":"2026-06-21T10:21:30","guid":{"rendered":"https:\/\/materialparts.com\/mx25l1606em2i-12g-2\/"},"modified":"2026-06-21T10:21:30","modified_gmt":"2026-06-21T10:21:30","slug":"mx25l1606em2i-12g-2","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/mx25l1606em2i-12g-2\/","title":{"rendered":"MX25L1606EM2I-12G"},"content":{"rendered":"

Productos<\/h2>\n

The MX25L1606EM2I-12G from Macronix is a 16 Mbit (2 MB) serial NOR flash memory with standard SPI and dual-output SPI interfaces, operating at 86 MHz clock frequency with 2.7 V to 3.6 V supply in an 8-pin SOIC package.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Tipo<\/td>\nSerial NOR Flash Memory<\/td>\n<\/tr>\n
Densidad<\/td>\n16 Mbit (2 MB)<\/td>\n<\/tr>\n
Interface<\/td>\nSPI (Standard x1 \/ Dual Output x2)<\/td>\n<\/tr>\n
Max Clock Frequency<\/td>\n86 MHz<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n2.7 V to 3.6 V<\/td>\n<\/tr>\n
Organization<\/td>\n8M x 2 (dual) \/ 16M x 1 (single)<\/td>\n<\/tr>\n
Sector Size<\/td>\n4 KB<\/td>\n<\/tr>\n
Block Size<\/td>\n64 KB<\/td>\n<\/tr>\n
Page Size<\/td>\n256 bytes<\/td>\n<\/tr>\n
Page Program Time<\/td>\n3 ms (typical)<\/td>\n<\/tr>\n
Sector Erase Time<\/td>\n200 ms (typical)<\/td>\n<\/tr>\n
Block Erase Time<\/td>\n2 s (typical 64KB)<\/td>\n<\/tr>\n
Endurance<\/td>\n100,000 program\/erase cycles<\/td>\n<\/tr>\n
Data Retention<\/td>\n20 years<\/td>\n<\/tr>\n
Standby Current<\/td>\n25 \u00b5A (typical)<\/td>\n<\/tr>\n
Paquete<\/td>\nSOIC-8 (208 mil \/ 5.3 mm)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to 85\u00b0C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Standard SPI and Dual Output SPI modes<\/li>\n
  • 86 MHz clock frequency<\/li>\n
  • 4 KB sectors and 64 KB blocks for flexible erase<\/li>\n
  • Secured OTP area and unique ID<\/li>\n
  • Hardware write protection and software write protection<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Embedded system firmware storage<\/li>\n
    • Bios\/boot code storage in computing devices<\/li>\n
    • Data logging in industrial equipment<\/li>\n
    • Consumer electronics configuration storage<\/li>\n
    • Networking equipment and set-top boxes<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The MX25L1606EM2I-12G from Macronix is a 16 Mbit (2 MB) serial NOR flash memory with standard SPI and dual-output SPI interfaces, operating at 86 MHz clock frequency with 2.7 V to 3.6 V supply in an 8-pin SOIC package. Key Specifications Type Serial NOR Flash Memory Density 16 Mbit (2 MB) Interface SPI […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13],"tags":[],"chip_brand":[164],"class_list":["post-6758","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","chip_brand-macronix"],"acf":{"brief_explanation":"16Mbit Serial NOR Flash, SPI\/Dual-SPI, 86MHz, SOIC-8, 2.7-3.6V","date_code":"","package_case":"SOIC-8 (5.3 x 5.4 x 1.9 mm, 208 mil)","in_stock":6875,"datasheet":"https:\/\/www.macronix.com\/en-us\/products\/NOR-Flash\/Serial-NOR-Flash\/Pages\/spec.aspx?p=MX25L1606E&m=Serial+NOR+Flash&n=PM1577","price":"$0.68 @ 1ku","product_introduction":"The MX25L1606EM2I-12G from Macronix is a 16 Mbit (2 MByte) serial NOR flash memory device supporting standard SPI (single I\/O) and dual-output SPI (two I\/O) interfaces at clock frequencies up to 86 MHz. The device is organized as 32 sectors of 4 KB each and 32 blocks of 64 KB each, providing flexible erase granularity. The page size is 256 bytes with 3 ms typical page program time. The device includes secured OTP (One-Time Programmable) area, unique ID, hardware hold pin, and multiple write protection modes. The MX25L1606E operates from 2.7 V to 3.6 V with 25 \u00b5A typical standby current, making it suitable for power-sensitive embedded applications.","working_principle":"The MX25L1606EM2I-12G is accessed through a standard SPI-compatible serial interface using four signals: Chip Select (CS#), Serial Clock (SCLK), Serial Data Input (SI), and Serial Data Output (SO). In dual-output mode, SO and SI both output data on consecutive clock edges, doubling throughput. Commands are issued by asserting CS# low, clocking in an 8-bit command byte followed by address and data bytes. Read operations output data from the addressed memory location. Page Program writes up to 256 bytes to an erased page. Erase operations clear 4 KB sectors or 64 KB blocks to all 1s. Write Enable (WREN) must be issued before any program or erase operation. The Block Protect bits (BP0-BP4) in the Status Register define write-protected address ranges. The Secured OTP area provides 512 bytes of one-time programmable storage for unique configuration data.","pin_description":"
      Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      1<\/td>CS#<\/td>Input<\/td>Chip select (active low)<\/td><\/tr>
      2<\/td>SO\/SIO1<\/td>I\/O<\/td>Serial data output \/ dual-SIO1<\/td><\/tr>
      3<\/td>WP#<\/td>Input<\/td>Write protect (active low)<\/td><\/tr>
      4<\/td>VSS<\/td>Ground<\/td>Ground<\/td><\/tr>
      5<\/td>SI\/SIO0<\/td>I\/O<\/td>Serial data input \/ dual-SIO0<\/td><\/tr>
      6<\/td>SCLK<\/td>Input<\/td>Serial clock<\/td><\/tr>
      7<\/td>HOLD#<\/td>Input<\/td>Hold (suspends serial communication)<\/td><\/tr>
      8<\/td>VDD<\/td>Power<\/td>Power supply (2.7-3.6V)<\/td><\/tr><\/table>","application_scenarios":"
      • Embedded microcontroller firmware and boot code storage<\/li>
      • BIOS and UEFI code storage in computing platforms<\/li>
      • Industrial data logging and configuration storage<\/li>
      • Consumer electronics parameter and calibration storage<\/li>
      • Networking equipment boot and firmware images<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        Macronix<\/td>MX25L1633FM2I-08G<\/td>SOIC-8<\/td>Replacement, 86MHz, quad-SPI<\/td><\/tr>
        Winbond<\/td>W25Q16JVSNIQ<\/td>SOIC-8<\/td>16Mbit, quad-SPI, 133MHz<\/td><\/tr>
        ISSI<\/td>IS25LP016D-JNLE<\/td>SOIC-8<\/td>16Mbit, quad-SPI, 133MHz<\/td><\/tr>
        GigaDevice<\/td>GD25Q16CTIGR<\/td>SOIC-8<\/td>16Mbit, quad-SPI, 120MHz<\/td><\/tr>
        Microchip<\/td>SST25VF016B-50-4I-S2AF<\/td>SOIC-8<\/td>16Mbit, 50MHz SPI<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6758","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=6758"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6758\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=6758"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=6758"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=6758"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=6758"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}