{"id":6728,"date":"2026-06-21T10:04:50","date_gmt":"2026-06-21T10:04:50","guid":{"rendered":"https:\/\/materialparts.com\/lmz34002rkgr\/"},"modified":"2026-06-21T10:04:50","modified_gmt":"2026-06-21T10:04:50","slug":"lmz34002rkgr","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/lmz34002rkgr\/","title":{"rendered":"LMZ34002RKGR"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The LMZ34002RKGR from Texas Instruments is a SIMPLE SWITCHER negative output power module that integrates a 15W DC-DC converter with a shielded inductor in a compact QFN-41 package. It supports an input voltage range of 4.5 V to 40 V and provides an adjustable negative output voltage from -3 V to -17 V at up to 2 A output current. The module requires only five external components, simplifying design.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Topology<\/td>\n<td>Buck-Boost (Inverting)<\/td>\n<\/tr>\n<tr>\n<td>Input Voltage<\/td>\n<td>4.5 V to 40 V<\/td>\n<\/tr>\n<tr>\n<td>Output Voltage<\/td>\n<td>-3 V to -17 V (Adjustable)<\/td>\n<\/tr>\n<tr>\n<td>Corriente de salida<\/td>\n<td>2 A<\/td>\n<\/tr>\n<tr>\n<td>Switching Frequency<\/td>\n<td>800 kHz (typical)<\/td>\n<\/tr>\n<tr>\n<td>Efficiency<\/td>\n<td>Up to 86%<\/td>\n<\/tr>\n<tr>\n<td>Surge Voltage<\/td>\n<td>45 V<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>B1QFN-41 (9 x 11 x 2.8 mm)<\/td>\n<\/tr>\n<tr>\n<td>Temperatura de funcionamiento<\/td>\n<td>-40\u00b0C to 85\u00b0C<\/td>\n<\/tr>\n<tr>\n<td>Thermal Impedance<\/td>\n<td>14\u00b0C\/W<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>Complete integrated power solution with shielded inductor<\/li>\n<li>Wide 4.5 V to 40 V input voltage range with 45 V surge capability<\/li>\n<li>Adjustable negative output from -3 V to -17 V<\/li>\n<li>Output current up to 2 A (15W)<\/li>\n<li>Synchronization with external clock<\/li>\n<li>Adjustable slow start<\/li>\n<li>Programmable undervoltage lockout (UVLO)<\/li>\n<li>Output overcurrent protection<\/li>\n<li>Overtemperature protection with thermal shutdown<\/li>\n<li>EN55022 Class B radiated emissions compliance<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Negative voltage rails for op-amps and data converters<\/li>\n<li>Industrial and medical instrumentation<\/li>\n<li>Test and measurement equipment<\/li>\n<li>Telecom power distribution<\/li>\n<li>Optical module bias supplies<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The LMZ34002RKGR from Texas Instruments is a SIMPLE SWITCHER negative output power module that integrates a 15W DC-DC converter with a shielded inductor in a compact QFN-41 package. It supports an input voltage range of 4.5 V to 40 V and provides an adjustable negative output voltage from -3 V to -17 V [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[31,13],"tags":[],"chip_brand":[138],"class_list":["post-6728","post","type-post","status-publish","format-standard","hentry","category-dc-dc-converters","category-integrated-circuits-ics","chip_brand-ti"],"acf":{"brief_explanation":"4.5-40V Input, 2A Negative Output Power Module, -3V to -17V, QFN-41","date_code":"","package_case":"B1QFN-41 (9 x 11 x 2.8 mm)","in_stock":4521,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/lmz34002.pdf","price":"$9.76 @ 1ku","product_introduction":"The LMZ34002RKGR is a SIMPLE SWITCHER power module from Texas Instruments designed to generate negative output voltages with minimal external components. It integrates a complete DC-DC converter including a shielded inductor in a compact 9 x 11 mm QFN package. The module accepts 4.5 V to 40 V input and produces an adjustable negative output from -3 V to -17 V at up to 2 A. Only five external components are required, eliminating loop compensation and magnetic component selection challenges. The integrated shielded inductor ensures EN55022 Class B EMI compliance and simplifies PCB layout.","working_principle":"The LMZ34002RKGR operates as a buck-boost (inverting) converter. The input voltage is applied across an internal power MOSFET and the integrated shielded inductor. During the ON-time, current builds in the inductor through the high-side switch. During the OFF-time, the inductor current flows through the low-side switch to the output capacitor and load, generating a negative output voltage. The controller uses voltage-mode control with input voltage feedforward for line regulation. An internal oscillator runs at 800 kHz (typical), and the device can be synchronized to an external clock. Protection circuits include cycle-by-cycle current limiting, output overcurrent protection, undervoltage lockout, and overtemperature shutdown.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr><tr><td>1<\/td><td>VIN<\/td><td>Power<\/td><td>Input voltage supply<\/td><\/tr><tr><td>2<\/td><td>EN<\/td><td>Input<\/td><td>Enable (active high)<\/td><\/tr><tr><td>3<\/td><td>SS\/TRK<\/td><td>Input<\/td><td>Soft-start \/ tracking<\/td><\/tr><tr><td>4<\/td><td>SYNC<\/td><td>Input<\/td><td>External clock synchronization<\/td><\/tr><tr><td>5<\/td><td>PGOOD<\/td><td>Output<\/td><td>Power good indicator<\/td><\/tr><tr><td>6<\/td><td>VADJ<\/td><td>Input<\/td><td>Output voltage adjust feedback<\/td><\/tr><tr><td>7<\/td><td>GND<\/td><td>Ground<\/td><td>Signal ground<\/td><\/tr><tr><td>8-41<\/td><td>OUT\/GND\/PAD<\/td><td>Power\/Ground<\/td><td>Output, ground, and thermal pad connections<\/td><\/tr><\/table>","application_scenarios":"<ul><li>Negative supply rails for precision op-amps and ADCs\/DACs<\/li><li>Industrial control systems requiring bipolar supplies<\/li><li>Medical instrumentation with isolated negative outputs<\/li><li>Telecom line driver bias supplies<\/td><\/tr><tr><td>Optical transceiver and RF amplifier bias<\/td><\/tr><\/ul>","alternative_models":"<table><tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>Texas Instruments<\/td><td>LMZ34003RKGR<\/td><td>QFN-41<\/td><td>3A version, same footprint<\/td><\/tr><tr><td>TI<\/td><td>LMZ13610<\/td><td>TO-PMOD-7<\/td><td>10A positive output module<\/td><\/tr><tr><td>Analog Devices<\/td><td>LTM8045<\/td><td>BGA-25<\/td><td>Inverting uModule, 2.8V to 18V out<\/td><\/tr><tr><td>Monolithic Power<\/td><td>MPM3632C<\/td><td>QFN-22<\/td><td>3A, 3.3V to 21V in, positive output<\/td><\/tr><tr><td>CUI Inc<\/td><td>PQB10-S5-DIN<\/td><td>DIP<\/td><td>Isolated DC-DC, 5V output<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6728","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=6728"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/6728\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=6728"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=6728"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=6728"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=6728"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}