The MPZ1608D101BTA00 from TDK is a ferrite bead EMI suppressor with 100 Ohm impedance at 100MHz, rated for 2A in a compact 1608 (0603) package for noise filtering on power and signal lines.<\/p>\n
| Paquete<\/td>\n | 1608 (0603)<\/td>\n<\/tr>\n<\/table>\nCaracter\u00edsticas<\/h2>\nAplicaciones<\/h2>\nProduct Overview The MPZ1608D101BTA00 from TDK is a ferrite bead EMI suppressor with 100 Ohm impedance at 100MHz, rated for 2A in a compact 1608 (0603) package for noise filtering on power and signal lines. Key Specifications Package 1608 (0603) Features See datasheet for complete specifications Industry-standard package Applications Industrial control Consumer electronics Communication equipment […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[57,13],"tags":[],"chip_brand":[205],"class_list":["post-5547","post","type-post","status-publish","format-standard","hentry","category-insulated-gate-bipolar-transistors-igbt","category-integrated-circuits-ics","chip_brand-tdk"],"acf":{"brief_explanation":"Ferrite bead EMI suppressor, 100 Ohm @ 100MHz, 1608 (0603), 2A","date_code":"","package_case":"1608 (0603)","in_stock":14135,"datasheet":"https:\/\/product.tdk.com\/en\/search\/emc\/emc\/bead\/info\/mpz1608_series.html","price":"$0.02 @ 1ku","product_introduction":"The MPZ1608D101BTA00 from TDK is a ferrite bead EMI suppressor with 100 Ohm impedance at 100MHz, rated for 2A in a compact 1608 (0603) package for noise filtering on power and signal lines.","working_principle":"The MPZ1608D101BTA00 is a multilayer ferrite bead EMI suppressor from TDK in 1608 (0603 metric) package, rated at 100 Ohm impedance at 100MHz with 2A rated current. Ferrite beads suppress high-frequency noise by converting it to heat through magnetic hysteresis losses in the ferrite material. At DC and low frequencies (below 10MHz), the bead presents low impedance (typically 0.1 ohm or less), allowing signal and power currents to pass with minimal voltage drop. At high frequencies (100MHz and above), the impedance rises to the rated value (100 ohm), attenuating EMI noise by reflecting it back to the source and absorbing it as heat. The impedance-frequency characteristic follows: Z = R + jX, where the resistive component (R) dominates above the resonant frequency, converting noise energy to heat rather than reflecting it (which could cause resonance). The 'D' suffix indicates the impedance tolerance grade (approximately +\/-25%). The rated current (2A) is defined as the DC current at which the impedance drops by 50% from its initial value due to magnetic saturation of the ferrite. The 1608 package size (1.6 x 0.8mm) is the most common footprint for ferrite beads, compatible with standard surface-mount assembly. The device is used for: (1) Power line filtering (placing a bead in series with VCC pins of ICs to suppress switching noise); (2) Signal line EMI suppression (USB, HDMI, Ethernet data lines); (3) Preventing high-frequency noise from propagating between circuit sections. The BTA00 suffix specifies tape-and-reel packaging (4000 pcs\/reel).","pin_description":"
|