{"id":3190,"date":"2026-05-31T03:20:14","date_gmt":"2026-05-31T03:20:14","guid":{"rendered":"https:\/\/materialparts.com\/tps92692qpwprq1\/"},"modified":"2026-06-06T03:28:55","modified_gmt":"2026-06-06T03:28:55","slug":"tps92692qpwprq1","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/tps92692qpwprq1\/","title":{"rendered":"TPS92692QPWPRQ1"},"content":{"rendered":"

Productos<\/h2>\n

The TPS92692QPWPRQ1 from Texas Instruments is an automotive AEC-Q100 Grade 1 qualified high-accuracy LED controller with spread spectrum frequency modulation. It supports step-up\/down LED driver topologies with an input voltage range of 4.5 V to 65 V, featuring both analog and PWM dimming with internal PWM generator. The device is packaged in a 20-pin HTSSOP.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n
Input Voltage Range<\/td>\n4.5 V to 65 V<\/td>\n<\/tr>\n
LED Current Accuracy<\/td>\nBetter than +\/-4%<\/td>\n<\/tr>\n
Switching Frequency<\/td>\n80 kHz to 800 kHz<\/td>\n<\/tr>\n
Dimming Range (PWM)<\/td>\n>1000:1<\/td>\n<\/tr>\n
Analog Dimming Range<\/td>\n>15:1<\/td>\n<\/tr>\n
Topology<\/td>\nBoost, Buck-Boost<\/td>\n<\/tr>\n
Cualificaci\u00f3n<\/td>\nAEC-Q100 Grade 1<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to 125\u00b0C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Wide input voltage range: 4.5 V to 65 V<\/li>\n
  • Better than +\/-4% LED current accuracy over -40\u00b0C to 150\u00b0C junction temperature<\/li>\n
  • Spread spectrum frequency modulation for improved EMI<\/li>\n
  • Internal analog voltage to PWM duty cycle generator<\/li>\n
  • Direct PWM input with over 1000:1 dimming range<\/li>\n
  • Analog LED current adjust (IADJ) with over 15:1 contrast ratio<\/li>\n
  • Integrated P-channel driver for series FET dimming<\/li>\n
  • Current monitor output and open-drain fault flag<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Automotive exterior lighting (headlights, DRL, fog lights)<\/li>\n
    • Driver monitoring systems (DMS)<\/li>\n
    • LED general lighting and exit signs<\/li>\n
    • Emergency and architectural lighting<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The TPS92692QPWPRQ1 from Texas Instruments is an automotive AEC-Q100 Grade 1 qualified high-accuracy LED controller with spread spectrum frequency modulation. It supports step-up\/down LED driver topologies with an input voltage range of 4.5 V to 65 V, featuring both analog and PWM dimming with internal PWM generator. The device is packaged in a […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,33],"tags":[],"chip_brand":[138],"class_list":["post-3190","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-led-driver-ics","chip_brand-ti"],"acf":{"brief_explanation":"Automotive LED controller, 4.5-65 V, spread spectrum, analog\/PWM dimming, AEC-Q100, HTSSOP-20","date_code":"","package_case":"HTSSOP-20 (5.10 x 6.60 mm)","in_stock":7350,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/tps92692-q1.pdf","price":"$1.13 @ 1ku","product_introduction":"The TPS92692QPWPRQ1 is a high-accuracy peak current-mode LED controller from Texas Instruments, qualified to AEC-Q100 Grade 1 for automotive applications. It supports boost and buck-boost LED driver topologies with a wide input voltage range of 4.5 V to 65 V, making it suitable for automotive battery-powered lighting systems. The device incorporates a rail-to-rail current sense amplifier for precise LED current measurement with better than +\/-4% accuracy across the full junction temperature range of -40\u00b0C to 150\u00b0C. Spread spectrum frequency modulation reduces EMI, simplifying filter design. The controller offers dual dimming capability: analog dimming via the IADJ input with over 15:1 contrast ratio, and PWM dimming through the DIM\/PWM pin with over 1000:1 range. An internal PWM generator converts a DC voltage at the DIM\/PWM pin to a corresponding duty cycle, enabling standalone dimming without an external PWM source.","working_principle":"The TPS92692QPWPRQ1 operates through five key subsystems: (1) The oscillator and spread spectrum block generates the switching frequency (adjustable 80-800 kHz) with frequency dithering to spread EMI energy and reduce peak emissions. (2) The peak current-mode control loop uses a transconductance error amplifier and current sense comparator to regulate the LED current. The COMP pin allows external compensation for loop stability. (3) The dimming subsystem supports two modes: analog dimming via the IADJ pin which scales the current reference, and PWM dimming via the DIM\/PWM pin which chops the LED current at the desired duty cycle. The internal PWM generator creates a PWM signal from a DC voltage. (4) The PDRV gate driver output controls an external P-channel series MOSFET for fast LED current on\/off during PWM dimming, improving dimming linearity at low duty cycles. (5) The protection and monitoring block includes output overvoltage protection, output short-circuit protection with hiccup mode, thermal shutdown, and a current monitor (IMON) output with fault flag (FLT) indicator.","pin_description":"
      Pin No.<\/td>Pin Name<\/td>Function<\/td><\/tr>
      1<\/td>VIN<\/td>Input supply voltage<\/td><\/tr>
      2<\/td>VREF<\/td>Internal reference voltage output<\/td><\/tr>
      3<\/td>IADJ<\/td>Analog LED current adjust input<\/td><\/tr>
      4<\/td>SS<\/td>Soft-start capacitor connection<\/td><\/tr>
      5<\/td>DM<\/td>Dither modulation frequency set resistor<\/td><\/tr>
      6<\/td>RT<\/td>Switching frequency set resistor<\/td><\/tr>
      7<\/td>DIM\/PWM<\/td>PWM dimming input \/ internal PWM generator<\/td><\/tr>
      8<\/td>COMP<\/td>Error amplifier output for compensation<\/td><\/tr>
      9<\/td>IS<\/td>Current sense amplifier inverting input<\/td><\/tr>
      10<\/td>PDRV<\/td>P-channel MOSFET gate driver output<\/td><\/tr>
      11<\/td>RAMP<\/td>Slope compensation capacitor<\/td><\/tr>
      12<\/td>GATE<\/td>Main N-channel MOSFET gate driver output<\/td><\/tr>
      13<\/td>CSN<\/td>Current sense negative input (switch current)<\/td><\/tr>
      14<\/td>CSP<\/td>Current sense positive input (LED current)<\/td><\/tr>
      15<\/td>OV<\/td>Output overvoltage protection input<\/td><\/tr>
      16<\/td>SLOPE<\/td>Slope compensation resistor<\/td><\/tr>
      17<\/td>GND<\/td>Device ground<\/td><\/tr>
      18<\/td>IMON<\/td>Current monitor output<\/td><\/tr>
      19<\/td>FLT<\/td>Fault flag output (open drain)<\/td><\/tr>
      20-21<\/td>NC\/PAD<\/td>Not connected \/ Thermal pad<\/td><\/tr><\/table>","application_scenarios":"
      • Automotive front lighting (LED headlights, DRL) requiring AEC-Q100 Grade 1 qualification with analog and PWM dimming<\/li>
      • Driver monitoring system (DMS) infrared LED drivers needing precise current control over wide temperature range<\/li>
      • Industrial LED lighting with buck-boost topology for battery-powered applications from 12 V to 48 V<\/li>
      • Emergency vehicle lighting systems requiring spread spectrum for EMI compliance in RF-sensitive environments<\/li><\/ul>","alternative_models":"
        Model<\/td>Brand<\/td>Vin Range<\/td>Dimming<\/td>Qualification<\/td><\/tr>
        TPS92692PWPR<\/td>TI<\/td>4.5-65 V<\/td>Analog + PWM<\/td>Catalog<\/td><\/tr>
        LM3492QMH<\/td>TI<\/td>6-65 V<\/td>PWM<\/td>AEC-Q100<\/td><\/tr>
        AL8862Q<\/td>Diodes Inc<\/td>4.5-40 V<\/td>PWM\/Analog<\/td>AEC-Q100<\/td><\/tr>
        BD18347EFV-M<\/td>Rohm<\/td>4.5-36 V<\/td>PWM<\/td>AEC-Q100<\/td><\/tr>
        MAX20078ATC\/VY+<\/td>ADI<\/td>5-65 V<\/td>Analog + PWM<\/td>AEC-Q100<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/3190","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=3190"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/3190\/revisions"}],"predecessor-version":[{"id":3271,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/3190\/revisions\/3271"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=3190"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=3190"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=3190"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=3190"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}