{"id":2925,"date":"2026-05-27T14:11:21","date_gmt":"2026-05-27T14:11:21","guid":{"rendered":"https:\/\/materialparts.com\/mk64fn1m0vll12\/"},"modified":"2026-05-27T14:11:21","modified_gmt":"2026-05-27T14:11:21","slug":"mk64fn1m0vll12","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/mk64fn1m0vll12\/","title":{"rendered":"MK64FN1M0VLL12"},"content":{"rendered":"

Productos<\/h2>\n

The MK64FN1M0VLL12 from NXP Semiconductors is a Kinetis K64 family 120MHz Arm Cortex-M4 microcontroller in a 100-LQFP package. It features 1MB Flash, 256KB SRAM, IEEE 1588 Ethernet, crystal-less USB 2.0 OTG, dual 16-bit ADCs, dual 12-bit DACs, and FlexMemory with up to 4KB EEPROM emulation, targeting industrial IoT and motor control applications.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
N\u00facleo<\/td>\nArm Cortex-M4 with FPU and DSP<\/td>\n<\/tr>\n
Max Frequency<\/td>\n120MHz<\/td>\n<\/tr>\n
Flash Memory<\/td>\n1024KB (1MB)<\/td>\n<\/tr>\n
SRAM<\/td>\n256 KB<\/td>\n<\/tr>\n
FlexMemory (EEPROM)<\/td>\n4KB EEPROM + 128KB FlexNVM<\/td>\n<\/tr>\n
Ethernet<\/td>\nIEEE 1588 MAC with hardware timestamp<\/td>\n<\/tr>\n
USB<\/td>\n2.0 OTG Full-Speed (crystal-less)<\/td>\n<\/tr>\n
ADC<\/td>\n2x 16-bit, 500ns conversion<\/td>\n<\/tr>\n
DAC<\/td>\n2x 12-bit<\/td>\n<\/tr>\n
Comparators<\/td>\n3x high-speed<\/td>\n<\/tr>\n
UART<\/td>\nUp to 6 (one with ISO7816)<\/td>\n<\/tr>\n
SPI \/ I2C<\/td>\n3x DSPI \/ 3x I2C<\/td>\n<\/tr>\n
CAN<\/td>\n1x<\/td>\n<\/tr>\n
Temporizadores<\/td>\n4x FlexTimer (20 channels), PIT, CMT<\/td>\n<\/tr>\n
GPIO<\/td>\n66<\/td>\n<\/tr>\n
DMA<\/td>\n16-channel with crossbar switch<\/td>\n<\/tr>\n
Security<\/td>\nMPU, CRC, RNG, AES (in select derivatives)<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n1.71V to 3.6V<\/td>\n<\/tr>\n
Paquete<\/td>\n100-LQFP (14 x 14mm)<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40\u00b0C to +105\u00b0C<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n
    \n
  • Arm Cortex-M4 core with single-precision FPU and DSP\/SIMD instructions<\/li>\n
  • 120MHz operation with single-cycle MAC<\/li>\n
  • 1MB dual-bank Flash for concurrent code execution and firmware update<\/li>\n
  • 256KB SRAM with multiple power gating regions<\/li>\n
  • FlexMemory: 4KB EEPROM emulation (>10M cycles) + 128KB FlexNVM<\/li>\n
  • IEEE 1588 Ethernet with hardware timestamping for industrial real-time control<\/li>\n
  • Crystal-less USB 2.0 OTG with embedded 48MHz oscillator<\/li>\n
  • Dual 16-bit ADCs with single\/differential mode and programmable delay trigger<\/li>\n
  • Dual 12-bit DACs for analog waveform generation<\/li>\n
  • Ultra-low-power: <340nA stop, <250\u03bcA\/MHz run, 4.5\u03bcs wake-up<\/li>\n
  • MCUXpresso SDK, IDE, and Config Tools support<\/li>\n<\/ul>\n

    Aplicaciones<\/h2>\n
      \n
    • Industrial IoT gateways and edge nodes<\/li>\n
    • Motor drive and motion control systems<\/li>\n
    • Smart energy and smart grid devices<\/li>\n
    • Medical instrumentation and patient monitoring<\/li>\n
    • POS terminals and payment systems<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The MK64FN1M0VLL12 from NXP Semiconductors is a Kinetis K64 family 120MHz Arm Cortex-M4 microcontroller in a 100-LQFP package. It features 1MB Flash, 256KB SRAM, IEEE 1588 Ethernet, crystal-less USB 2.0 OTG, dual 16-bit ADCs, dual 12-bit DACs, and FlexMemory with up to 4KB EEPROM emulation, targeting industrial IoT and motor control applications. Key […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,25],"tags":[],"chip_brand":[168],"class_list":["post-2925","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-microcontrollers-mcu","chip_brand-nxp"],"acf":{"brief_explanation":"Kinetis K64 120MHz Cortex-M4F MCU, 1MB Flash, 256KB SRAM, Ethernet, USB OTG, 100-LQFP","date_code":"","package_case":"100-LQFP (14 x 14 x 1.4mm)","in_stock":12476,"datasheet":"https:\/\/www.nxp.com\/docs\/en\/data-sheet\/K64P144M120SF5.pdf","price":"$7.62 @ 10ku","product_introduction":"The MK64FN1M0VLL12 from NXP Semiconductors is a high-performance Kinetis K64 family microcontroller based on the Arm Cortex-M4 core with floating-point unit and DSP instructions, running at 120MHz. It integrates 1MB dual-bank Flash, 256KB SRAM, and FlexMemory (4KB EEPROM + 128KB FlexNVM). Key connectivity includes IEEE 1588 Ethernet with hardware timestamping, crystal-less USB 2.0 OTG, 6 UARTs, 3 SPI, 3 I2C, and CAN. Analog peripherals include dual 16-bit ADCs, dual 12-bit DACs, and three high-speed comparators. The device features ultra-low-power modes with stop current below 340nA and 4.5\u03bcs wake-up time.","working_principle":"The MK64FN1M0VLL12 is built around an Arm Cortex-M4F core with a 4-stage pipeline executing Thumb-2 instructions at up to 120MHz. The crossbar switch enables concurrent multi-master bus accesses to Flash, SRAM, and peripherals via a 16-channel DMA controller. The dual-bank Flash architecture allows one bank to execute code while the other is being programmed, enabling firmware-over-the-air updates without halting execution. The FlexMemory controller provides up to 4KB of byte-writeable EEPROM emulation with over 10 million write cycles, plus 128KB of additional FlexNVM. The Ethernet MAC with IEEE 1588 precision time protocol hardware timestamping enables sub-microsecond clock synchronization for industrial real-time networks. The USB 2.0 OTG controller integrates a 48MHz oscillator, eliminating the need for an external crystal.","pin_description":"
      Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      1-8<\/td>PTE0-PTE7<\/td>I\/O<\/td>Port E: SPI, UART, I2C, Ethernet<\/td><\/tr>
      9-16<\/td>PTA0-PTA7<\/td>I\/O<\/td>Port A: Ethernet, UART0, JTAG<\/td><\/tr>
      17-24<\/td>PTA8-PTA15<\/td>I\/O<\/td>Port A: Ethernet, UART0, I2S<\/td><\/tr>
      25-32<\/td>PTB0-PTB7<\/td>I\/O<\/td>Port B: ADC, UART, CAN, FTMs<\/td><\/tr>
      33-40<\/td>PTB8-PTB15<\/td>I\/O<\/td>Port B: ADC, SPI, I2C, FTMs<\/td><\/tr>
      41-48<\/td>PTC0-PTC7<\/td>I\/O<\/td>Port C: USB, UART, SPI, FTMs<\/td><\/tr>
      49-56<\/td>PTC8-PTC15<\/td>I\/O<\/td>Port C: UART, I2S, FTMs<\/td><\/tr>
      57-64<\/td>PTD0-PTD7<\/td>I\/O<\/td>Port D: DAC, ADC, SPI, UART<\/td><\/tr>
      65-72<\/td>PTD8-PTD15<\/td>I\/O<\/td>Port D: FTMs, I2C, SPI<\/td><\/tr>
      73-80<\/td>VDD\/VSS<\/td>Power<\/td>Multiple supply\/ground pairs<\/td><\/tr>
      81-88<\/td>VDDA\/VSSA<\/td>Power<\/td>Analog supply and reference<\/td><\/tr>
      89-96<\/td>USB\/VREF<\/td>Power\/I\/O<\/td>USB supply, voltage reference<\/td><\/tr><\/table>","application_scenarios":"
      • Industrial IoT gateways with Ethernet and IEEE 1588 PTP synchronization<\/li>
      • Motor drive control using dual ADCs, DACs, and FlexTimer PWM<\/li>
      • Medical patient monitoring devices with USB data transfer<\/li>
      • Smart energy meters with Ethernet connectivity and real-time control<\/li>
      • POS terminals requiring dual-bank Flash for secure firmware updates<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        NXP<\/td>MK64FN1M0VMD12<\/td>MAPBGA-121<\/td>BGA package version, same specs<\/td><\/tr>
        NXP<\/td>MK64FX512VLL12<\/td>LQFP-100<\/td>512KB Flash variant<\/td><\/tr>
        ST<\/td>STM32F407VET6<\/td>LQFP-100<\/td>Cortex-M4, 168MHz, Ethernet<\/td><\/tr>
        TI<\/td>TM4C1294NCPDT<\/td>TQFP-128<\/td>Cortex-M4F, 120MHz, Ethernet<\/td><\/tr>
        Microchip<\/td>SAME70Q21B-AN<\/td>TQFP-144<\/td>Cortex-M7, 300MHz, Ethernet<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/2925","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=2925"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/2925\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=2925"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=2925"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=2925"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=2925"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}