{"id":2108,"date":"2026-05-14T03:40:10","date_gmt":"2026-05-14T03:40:10","guid":{"rendered":"https:\/\/materialparts.com\/lt3759emsepbf\/"},"modified":"2026-05-15T08:32:44","modified_gmt":"2026-05-15T08:32:44","slug":"lt3759emsepbf","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/lt3759emsepbf\/","title":{"rendered":"LT3759EMSE#PBF"},"content":{"rendered":"<h2>Productos<\/h2>\n<p>The LT3759EMSE#PBF is a wide input voltage range current-mode DC\/DC controller from Analog Devices (formerly Linear Technology). Operating from 1.6 V to 42 V input, it can be configured as a Boost, SEPIC, or Inverting (Flyback) converter. A unique single FBX feedback pin programs either positive or negative output voltage. It drives an external N-channel MOSFET with an internal LDO providing up to 4.75 V gate drive. Switching frequency is programmable from 100 kHz to 1 MHz with external synchronization capability.<\/p>\n<h2>Especificaciones<\/h2>\n<table>\n<tr>\n<td>Input Voltage<\/td>\n<td>1.6 V to 42 V<\/td>\n<\/tr>\n<tr>\n<td>Topology<\/td>\n<td>Boost \/ SEPIC \/ Inverting (Flyback)<\/td>\n<\/tr>\n<tr>\n<td>Control Mode<\/td>\n<td>Current-mode<\/td>\n<\/tr>\n<tr>\n<td>Switching Frequency<\/td>\n<td>100 kHz to 1 MHz (external resistor)<\/td>\n<\/tr>\n<tr>\n<td>Output Configuration<\/td>\n<td>Positive or negative (single FBX pin)<\/td>\n<\/tr>\n<tr>\n<td>Sense Threshold<\/td>\n<td>50 mV (precise)<\/td>\n<\/tr>\n<tr>\n<td>Internal LDO<\/td>\n<td>INTVCC up to 4.75 V gate drive supply<\/td>\n<\/tr>\n<tr>\n<td>PGOOD<\/td>\n<td>Active-low open-drain output<\/td>\n<\/tr>\n<tr>\n<td>Shutdown Current<\/td>\n<td>&lt;1 &#956;A<\/td>\n<\/tr>\n<tr>\n<td>Operating IQ<\/td>\n<td>450 &#956;A typ @ VIN = 12 V<\/td>\n<\/tr>\n<tr>\n<td>Temperatura de funcionamiento<\/td>\n<td>-40 &#176;C to +125 &#176;C<\/td>\n<\/tr>\n<tr>\n<td>Paquete<\/td>\n<td>MSOP-12 with Exposed Pad (3.0 mm width)<\/td>\n<\/tr>\n<\/table>\n<h2>Caracter\u00edsticas<\/h2>\n<ul>\n<li>Ultra-wide 1.6 V to 42 V input range suits battery to automotive systems<\/li>\n<li>Single FBX pin programs positive or negative output voltage<\/li>\n<li>Programmable switching frequency with external clock synchronization<\/li>\n<li>PGOOD output for power supply status monitoring<\/li>\n<li>Programmable soft-start and frequency foldback for startup and short-circuit protection<\/li>\n<li>Programmable input UVLO with hysteresis<\/li>\n<\/ul>\n<h2>Aplicaciones<\/h2>\n<ul>\n<li>Telecom and industrial Boost\/SEPIC\/Inverting converters<\/li>\n<li>Distributed power systems<\/li>\n<li>Portable electronic devices<\/li>\n<li>Automotive power systems<\/li>\n<li>Positive or negative output power supplies<\/li>\n<li>48 V telecom power<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The LT3759EMSE#PBF is a wide input voltage range current-mode DC\/DC controller from Analog Devices (formerly Linear Technology). Operating from 1.6 V to 42 V input, it can be configured as a Boost, SEPIC, or Inverting (Flyback) converter. A unique single FBX feedback pin programs either positive or negative output voltage. It drives an [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":2182,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[178],"class_list":["post-2108","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-analog-devices"],"acf":{"brief_explanation":"Wide-input Boost\/SEPIC\/Inverting DC\/DC controller, 1.6-42V input, 100kHz-1MHz prog. freq, current-mode, PGOOD output, MSOP-12 EP, -40C to +125C.","date_code":"","package_case":"MSOP-12 with Exposed Pad (3.0mm width)","in_stock":4286,"datasheet":"https:\/\/www.analog.com\/en\/products\/lt3759.html","price":"$3.27 @ 1ku","product_introduction":"The LT3759EMSE#PBF is a wide input voltage range current-mode DC\/DC controller from Analog Devices (formerly Linear Technology). It operates from 1.6V to 42V input and can be configured as Boost, SEPIC, or Inverting (Flyback) topology. A single FBX feedback pin programs positive or negative output voltage. It drives an external N-channel MOSFET with internal LDO providing up to 4.75V gate drive. Switching frequency is programmable from 100kHz to 1MHz with external sync capability. Features include PGOOD output, programmable soft-start, frequency foldback, and &lt;1uA shutdown current.","working_principle":"The LT3759 uses fixed-frequency current-mode control. The error amplifier compares the FBX pin feedback with an internal reference, generating an error signal for the PWM comparator. A current-sense amplifier monitors external MOSFET current through the SENSE pin at a precise 50mV threshold for cycle-by-cycle current limiting. An internal LDO (INTVCC) powers the gate driver from VIN or DRIVE pin, supplying up to 4.75V. The FBX window comparator monitors output voltage and asserts PGOOD (active-low open-drain) when out of range. The SS pin sets startup ramp time; frequency foldback limits inductor current during output short-circuit. RT pin sets switching frequency; SYNC accepts external clock.","pin_description":"<table>\r\n<tbody>\r\n<tr>\r\n<th>Pin<\/th>\r\n<th>MSOP-12<\/th>\r\n<th>Function<\/th>\r\n<th>Description<\/th>\r\n<\/tr>\r\n<tr>\r\n<td>1<\/td>\r\n<td>SS<\/td>\r\n<td>Soft-Start<\/td>\r\n<td>External cap sets startup time<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>2<\/td>\r\n<td>RT<\/td>\r\n<td>Frequency Set<\/td>\r\n<td>Resistor sets 100kHz~1MHz<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>3<\/td>\r\n<td>SYNC<\/td>\r\n<td>Synchronization<\/td>\r\n<td>External clock input<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>4<\/td>\r\n<td>EN\/UVLO<\/td>\r\n<td>Enable \/ UVLO<\/td>\r\n<td>Programmable threshold with hysteresis<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>5<\/td>\r\n<td>VIN<\/td>\r\n<td>Input Supply<\/td>\r\n<td>1.6V~42V<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>6<\/td>\r\n<td>INTVCC<\/td>\r\n<td>Internal LDO Output<\/td>\r\n<td>Gate drive supply; max 4.75V<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>7<\/td>\r\n<td>DRIVE<\/td>\r\n<td>Drive Supply Input<\/td>\r\n<td>INTVCC source: VIN or DRIVE<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>8<\/td>\r\n<td>GATE<\/td>\r\n<td>Gate Drive Output<\/td>\r\n<td>Drives external N-ch MOSFET<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>9<\/td>\r\n<td>SENSE<\/td>\r\n<td>Current Sense<\/td>\r\n<td>50mV precise threshold<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>10<\/td>\r\n<td>GND<\/td>\r\n<td>Ground<\/td>\r\n<td>-<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>11<\/td>\r\n<td>FBX<\/td>\r\n<td>Feedback Input<\/td>\r\n<td>Single pin for + or - output programming<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>12<\/td>\r\n<td>PGOOD<\/td>\r\n<td>Power Good<\/td>\r\n<td>Active-low open-drain output<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>EP<\/td>\r\n<td>GND<\/td>\r\n<td>Exposed Pad<\/td>\r\n<td>Thermal and electrical GND<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>","application_scenarios":"<ul>\r\n \t<li>Telecom and industrial Boost\/SEPIC\/Inverting converters<\/li>\r\n \t<li>Distributed power systems<\/li>\r\n \t<li>Portable electronic devices<\/li>\r\n \t<li>Automotive power systems<\/li>\r\n \t<li>Positive or negative output power supplies<\/li>\r\n \t<li>48V telecom power<\/li>\r\n<\/ul>","alternative_models":"<table>\r\n<tbody>\r\n<tr>\r\n<th>Model<\/th>\r\n<th>Type<\/th>\r\n<th>Notes<\/th>\r\n<\/tr>\r\n<tr>\r\n<td>LT3759EMSE#TRPBF<\/td>\r\n<td>Same part<\/td>\r\n<td>Tape and reel packaging<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>LT3759IMSE#PBF<\/td>\r\n<td>Same family<\/td>\r\n<td>Industrial grade -40C~+125C<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>LT3757<\/td>\r\n<td>Functional equiv.<\/td>\r\n<td>Earlier LTC boost\/buck-boost controller<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>LT8330<\/td>\r\n<td>Functional equiv.<\/td>\r\n<td>LTC internal-switch boost; 1A; 3-40V<\/td>\r\n<\/tr>\r\n<tr>\r\n<td>LM5155<\/td>\r\n<td>Functional equiv.<\/td>\r\n<td>TI Boost\/SEPIC controller; 42V input<\/td>\r\n<\/tr>\r\n<\/tbody>\r\n<\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/2108","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=2108"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/2108\/revisions"}],"predecessor-version":[{"id":2183,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/2108\/revisions\/2183"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media\/2182"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=2108"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=2108"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=2108"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=2108"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}