El MMBT2222ALT1G de onsemi es un transistor NPN de silicio de uni\u00f3n bipolar de prop\u00f3sito general en un encapsulado de montaje superficial SOT-23 (2,9 x 1,3 x 1,0 mm). Es el equivalente SMD del cl\u00e1sico transistor NPN de agujero pasante 2N2222A. Especificaciones clave: VCEO = 40V, VCBO = 60V, VEBO = 6V, IC = 600mA continuos, PC = 225mW (en PCB FR-4), hFE = 35-300 (graduado), VCE(sat) = 0.3V max en IC=150mA\/IB=15mA, 1.0V max en IC=500mA\/IB=50mA, fT = 300MHz. Certificaci\u00f3n AEC-Q101 y PPAP para aplicaciones de automoci\u00f3n. Sin hal\u00f3genos ni BFR. Temperatura de funcionamiento: -55C a 150C. C\u00f3digo de marcado: 1P. Dispositivo PNP complementario: MMBT2907A. Producto activo, conforme a RoHS.<\/p>","protected":false},"excerpt":{"rendered":"
The MMBT2222ALT1G from onsemi is an NPN silicon general-purpose bipolar junction transistor in a SOT-23 surface-mount package (2.9 x 1.3 x 1.0 mm). It is the SMD equivalent of the classic 2N2222A through-hole NPN transistor. Key specifications: VCEO = 40V, VCBO = 60V, VEBO = 6V, IC = 600mA continuous, PC = 225mW (on FR-4 […]<\/p>\n","protected":false},"author":2,"featured_media":2845,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[26,13],"tags":[],"chip_brand":[144],"class_list":["post-1916","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-digital-signal-processors-dsp","category-integrated-circuits-ics","chip_brand-on"],"acf":{"brief_explanation":"NPN GP BJT, 40V, 600mA, hFE 35-300, SOT-23, AEC-Q101, fT 300MHz, complementary to MMBT2907A","date_code":"","package_case":"SOT-23-3 \/ TO-236-3 (2.9 x 1.3 x 1.0 mm)","in_stock":730189,"datasheet":"https:\/\/www.onsemi.com\/products\/discrete-power-modules\/bipolar-transistors\/mmbt2222a","price":"$0.010 (3K+ pcs, reel)","product_introduction":"The MMBT2222ALT1G from onsemi is a 40V NPN silicon bipolar junction transistor (BJT) designed for general-purpose linear and switching applications in a surface-mount SOT-23 package. It is the SMD equivalent of the legendary 2N2222A, one of the most widely used and recognized NPN transistors in the history of electronics. The MMBT version brings the same proven electrical characteristics to modern surface-mount designs.\n\nThe 2N2222\/2N2907 complementary pair (NPN\/PNP respectively) has been the go-to choice for complementary transistor circuits since the 1960s. The MMBT2222A and MMBT2907A continue this tradition in the SOT-23 package, enabling push-pull amplifiers, H-bridge motor drivers, and other complementary topologies in compact SMD designs. Their widespread availability and low cost make them the default choice for general-purpose NPN\/PNP pairs in new designs.\n\nThe device is AEC-Q101 qualified, having passed the rigorous automotive reliability testing including temperature cycling, high-temperature operating life, humidity bias, and ESD testing. This makes it suitable for under-hood automotive electronics and any application requiring high reliability. The PPAP (Production Part Approval Process) capability means the device can be used in automotive production with full documentation support.\n\nThe MMBT2222ALT1G is characterized by its versatile specifications: 40V VCEO provides adequate voltage margin for 12V and 24V systems; 600mA continuous collector current handles moderate loads; 300MHz transition frequency supports switching and amplification well into the VHF range; and the wide hFE range (35-300) provides gain for various bias conditions. The SOT-23 package limits power dissipation to 225mW, making this device most suitable for small-signal and driver applications rather than power output stages.\n\nFor the MMBT2222AL specifically (L suffix), the key difference from the non-automotive MMBT2222A is the AEC-Q101 qualification, which ensures the device meets automotive reliability standards. The electrical characteristics are identical. The A-version (MMBT2222AL vs MMBT2222L) has a higher VCEO rating (40V vs 30V) and tighter hFE grouping.\n\nThe marking code for MMBT2222AL is '1P', which must be carefully identified as other SOT-23 devices may use similar codes. The T1G suffix indicates tape-and-reel packaging with Pb-free termination finish. The device is available in reel packaging (3000 pcs\/reel) or cut tape for smaller quantities.","working_principle":"The MMBT2222ALT1G operates as an NPN bipolar junction transistor (BJT) using the principle of current-controlled current amplification.\n\nNPN BJT Structure: The transistor consists of three semiconductor layers: N-type emitter, P-type base, and N-type collector. The two PN junctions are the emitter-base junction (forward-biased in active operation) and the collector-base junction (reverse-biased in active operation). For an NPN transistor, conventional current flows from collector to emitter through the device, with a small base current controlling the much larger collector current.\n\nActive Mode Operation: When the emitter-base junction is forward-biased (base voltage approximately 0.7V above emitter voltage for silicon) and the collector-base junction is reverse-biased (collector voltage higher than base voltage), electrons (majority carriers in the N-type emitter) are injected from the heavily doped emitter into the thin P-type base region. The base is deliberately made very thin (typically 1-10 micrometers) so that most injected electrons (98-99.7%) diffuse across it without recombining and are swept into the collector by the electric field of the reverse-biased collector-base junction, forming the collector current. The small fraction of electrons that recombine in the base must be replaced by holes flowing out of the base terminal, creating the base current. The relationship IC = hFE x IB defines the current gain, where hFE typically ranges from 35 to 300 for the MMBT2222AL depending on IC and VCE.\n\nSaturation Mode: When sufficient base current is applied such that IC cannot increase further (limited by the external circuit resistance and supply voltage), both junctions become forward-biased and the transistor enters saturation. In saturation, VCE drops to VCE(sat) (0.3V max at IC=150mA for this device), and the transistor behaves as a closed switch between collector and emitter. The key requirement for saturation is IB > IC\/hFE(min). Designers typically use an overdrive factor of 2x (IB = 2 x IC\/hFE(min)) to ensure deep saturation under all conditions.\n\nCutoff Mode: When IB = 0 (base-emitter junction not forward-biased), only a small leakage current (ICBO, typically <10nA at 25C) flows from collector to emitter. The transistor is effectively an open switch. In digital switching applications, the base is driven between cutoff (off) and saturation (on) states.\n\nSwitching Characteristics: The MMBT2222AL exhibits typical switching times at IC=150mA, IB1=IB2=15mA: delay time td=10ns, rise time tr=25ns, storage time ts=225ns, fall time tf=60ns. The total turn-on time (td+tr) is approximately 35ns, and the total turn-off time (ts+tf) is approximately 285ns. The storage time (ts) is typically the longest switching interval and is caused by the stored minority carrier charge in the base region that must be removed before the transistor can turn off. A Baker clamp (Schottky diode from base to collector) can reduce storage time by preventing deep saturation.\n\nFrequency Response: The transition frequency fT = 300MHz represents the frequency at which the common-emitter current gain drops to unity. The gain-bandwidth product is approximately constant: hFE x f = fT. At IC=20mA where hFE is typically 200, the usable bandwidth is approximately 1.5MHz. The Miller effect (effective multiplication of Ccb by the voltage gain) significantly reduces the practical bandwidth in common-emitter amplifiers with resistive loads. For wideband applications, the common-base configuration avoids the Miller effect.\n\nSafe Operating Area: The device must be operated within its maximum ratings at all times: VCEO < 40V, IC < 600mA continuous, PC < 225mW on FR-4 PCB, TJ < 150C. The secondary breakdown characteristic further limits the maximum IC at high VCE in the active region. For safe switching, the load line during transitions should remain within the forward-bias safe operating area (FBSOA) defined in the datasheet.","pin_description":"
| Pin<\/th> | Name<\/th> | Type<\/th> | Description<\/th><\/tr><\/thead> | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1<\/td> | Base<\/td> | Input<\/td> | Base terminal of the NPN transistor; current flows into this pin to turn on the transistor; the base must be approximately 0.7V above the emitter voltage to forward-bias the emitter-base junction; input impedance is moderate (typically 1-10kohm depending on operating point); connect through a current-limiting resistor from the driving circuit; maximum base current is 50mA continuous<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 2<\/td> | Emitter<\/td> | I\/O<\/td> | Emitter terminal of the NPN transistor; typically connected to ground in common-emitter configuration; conventional current flows out of this pin during conduction; the emitter current equals the sum of collector and base currents (IE = IC + IB); often the reference terminal for circuit biasing<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 3<\/td> | Collector<\/td> | Output<\/td> | Collector terminal of the NPN transistor; current flows into this pin from the supply through the load; in saturation, the collector voltage drops to VCE(sat) above the emitter voltage; in cutoff, the collector voltage equals the supply voltage (open switch); maximum collector voltage is 40V (VCEO)<\/td><\/tr><\/tbody><\/table>","application_scenarios":"
|