The MMBT2907ALT1G from onsemi is a PNP silicon general-purpose bipolar junction transistor in a SOT-23 surface-mount package (2.9 x 1.3 x 1.0 mm). It is the SMD equivalent of the classic 2N2907A through-hole PNP transistor. Key specifications: VCEO = -60V, VCBO = -60V, VEBO = -5V, IC = -600mA continuous (-1200mA peak), PC = 350mW (on FR-4 PCB), hFE = 100-300 (graded), VCE(sat) = -0.4V max at IC=-150mA\/IB=-15mA, -1.6V max at IC=-500mA\/IB=-50mA, fT = 200MHz. AEC-Q101 qualified and PPAP capable for automotive applications. Halogen-free and BFR-free. The -L suffix (LT1G) indicates AEC-Q101 automotive qualification. Operating temperature: -55C to 150C. Marking code: 2B. Complementary NPN device: MMBT2222A. Active product, RoHS compliant.<\/p>","protected":false},"excerpt":{"rendered":"
The MMBT2907ALT1G from onsemi is a PNP silicon general-purpose bipolar junction transistor in a SOT-23 surface-mount package (2.9 x 1.3 x 1.0 mm). It is the SMD equivalent of the classic 2N2907A through-hole PNP transistor. Key specifications: VCEO = -60V, VCBO = -60V, VEBO = -5V, IC = -600mA continuous (-1200mA peak), PC = 350mW […]<\/p>\n","protected":false},"author":2,"featured_media":2846,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[26,13],"tags":[],"chip_brand":[144],"class_list":["post-1915","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-digital-signal-processors-dsp","category-integrated-circuits-ics","chip_brand-on"],"acf":{"brief_explanation":"PNP GP BJT, -60V, -600mA, hFE 100-300, SOT-23, AEC-Q101, fT 200MHz, complementary to MMBT2222A","date_code":"","package_case":"SOT-23-3 \/ TO-236-3 (2.9 x 1.3 x 1.0 mm)","in_stock":4393894,"datasheet":"https:\/\/www.onsemi.com\/products\/discrete-power-modules\/bipolar-transistors\/mmbt2907a","price":"$0.0102 (3K+ pcs, reel)","product_introduction":"The MMBT2907ALT1G from onsemi is a -60V PNP silicon bipolar junction transistor (BJT) designed for general-purpose linear and switching applications in a surface-mount SOT-23 package. It is the SMD equivalent of the industry-standard 2N2907A PNP transistor, one of the most widely used small-signal PNP transistors since the 1960s. The MMBT version brings the same trusted electrical characteristics to modern surface-mount designs.\n\nThe 2N2907\/2N2222 complementary pair (PNP\/NPN respectively) is arguably the most classic transistor complementary pair in electronics. The MMBT2907A and MMBT2222A maintain this complementary relationship in the SOT-23 surface-mount package, enabling push-pull amplifier stages, H-bridge motor drivers, and other complementary circuit topologies in compact SMD designs.\n\nThe device is AEC-Q101 qualified, meaning it has passed the rigorous reliability testing required for automotive electronics applications, including temperature cycling, high-temperature operating life (HTOL), humidity bias, and electrostatic discharge (ESD) testing. This qualification makes the MMBT2907ALT1G suitable for under-hood automotive applications and any environment demanding high reliability.\n\nThe PNP polarity means that conventional current flows from emitter to collector when the transistor is conducting. In a typical low-side PNP switch configuration, the emitter is connected to the positive supply, the load is between the collector and ground, and the base is pulled low (below the emitter voltage by approximately 0.7V) to turn on the transistor. This is the mirror image of the more common NPN low-side switch, where the emitter is at ground and the base is driven high.\n\nThe hFE (DC current gain) ranges from 100 to 300 at IC=-10mA, VCE=-10V, providing substantial gain for small-signal applications. At higher currents (IC=-500mA), the minimum hFE drops to 50, which still provides useful gain for medium-power switching. The gain variation with current and temperature must be considered in circuit design; worst-case design should use the minimum hFE at the maximum operating current and temperature.\n\nThe transition frequency (fT) of 200MHz indicates the frequency at which the common-emitter current gain drops to unity (0dB). In practice, the useful bandwidth for amplifier applications is fT \/ hFE, which for hFE=100 gives approximately 2MHz. This is adequate for audio and many general-purpose applications but insufficient for RF applications above a few MHz.\n\nThe SOT-23 package is the most widely used surface-mount transistor package, with a footprint of only 2.9 x 1.3 mm. The power dissipation is limited to 350mW when mounted on a standard FR-4 PCB with recommended pad layout, due to the small thermal mass and limited heat spreading area. For higher power applications, the through-hole 2N2907A in a TO-18 or TO-92 package provides better thermal performance.\n\nThe marking code for the MMBT2907A is '2B', which must be distinguished from other SOT-23 devices with similar markings. The L suffix in MMBT2907ALT1G indicates AEC-Q101 qualification, and the T1G suffix indicates tape-and-reel packaging with Pb-free termination finish.","working_principle":"The MMBT2907ALT1G operates as a PNP bipolar junction transistor (BJT) in the common-emitter, common-base, or common-collector configuration.\n\nPNP BJT Structure: The transistor consists of three semiconductor layers: P-type emitter, N-type base, and P-type collector. The two PN junctions are the emitter-base junction (forward-biased in active operation) and the collector-base junction (reverse-biased in active operation). For a PNP transistor, conventional current flows from emitter to collector (opposite to the NPN direction), and the base current flows out of the base terminal.\n\nActive Mode Operation: When the emitter-base junction is forward-biased (emitter voltage higher than base voltage by approximately 0.7V for silicon) and the collector-base junction is reverse-biased (collector voltage lower than base voltage for PNP), the transistor operates in the active region. Holes (majority carriers in the P-type emitter) are injected from the emitter into the thin N-type base region. Most of these holes (typically 98-99.7%) traverse the base without recombining and are swept into the collector by the electric field of the reverse-biased collector-base junction, forming the collector current. A small fraction of holes recombine with electrons in the base, and these electrons must be supplied by the base current, establishing the relationship IC = hFE x IB.\n\nSaturation Mode: When the transistor is driven with sufficient base current such that IC cannot increase further (limited by the external circuit), the transistor enters saturation. In saturation, both junctions are forward-biased, VCE approaches VCE(sat) (-0.4V at IC=-150mA for this device), and the transistor acts as a closed switch. The collector current is determined by the external circuit (supply voltage and load resistance), and the base current must exceed IC\/hFE to maintain saturation. The overdrive factor (IB_actual \/ IB_min) determines how deeply saturated the transistor is, with deeper saturation providing lower VCE(sat) but longer turn-off time.\n\nSwitching Characteristics: When switching between cutoff and saturation, the transistor passes through the active region where both VCE and IC are significant, resulting in instantaneous power dissipation (P = VCE x IC). The switching time includes: (1) delay time (td) - time from base drive application to collector current beginning to rise; (2) rise time (tr) - time for collector current to rise from 10% to 90% of final value; (3) storage time (ts) - time from base drive removal to collector current beginning to fall (related to stored charge removal from the base); (4) fall time (tf) - time for collector current to fall from 90% to 10%. For the MMBT2907A at IC=-150mA\/IB=-15mA, typical switching times are: td=15ns, tr=40ns, ts=200ns, tf=40ns. The storage time is typically the dominant switching time and can be reduced by using a Baker clamp or base drive reversal.\n\nFrequency Response: The transition frequency fT = 200MHz is the frequency at which the common-emitter current gain (hFE) drops to unity. The gain-bandwidth product is approximately constant: hFE x f = fT, so at f = 1MHz, the available gain is approximately 200 (at low currents). At higher currents and voltages, the actual fT may be lower due to transit time and capacitance effects. The Miller effect (multiplication of base-collector capacitance by voltage gain) further limits the practical bandwidth in common-emitter configurations.\n\nThermal Behavior: The junction temperature affects all transistor parameters: hFE increases with temperature (approximately 0.3%\/C), VBE decreases with temperature (approximately -2mV\/C), leakage currents increase exponentially with temperature, and VCE(sat) decreases slightly with temperature. The thermal resistance from junction to ambient (Rth j-a) is 556C\/W for the SOT-23 package, meaning 350mW dissipation raises the junction temperature approximately 195C above ambient (at the thermal limit). Careful thermal design is required when operating near the maximum power dissipation.","pin_description":"
| Pin<\/th> | Name<\/th> | Type<\/th> | Description<\/th><\/tr><\/thead> | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1<\/td> | Base<\/td> | Input<\/td> | Base terminal of the PNP transistor; current flows out of this pin to turn on the transistor; for PNP, the base must be approximately 0.7V below the emitter voltage to forward-bias the emitter-base junction; input impedance is moderate (typically 1-10kohm depending on operating point); connect through a current-limiting resistor from the driving circuit<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 2<\/td> | Emitter<\/td> | I\/O<\/td> | Emitter terminal of the PNP transistor; typically connected to the positive supply rail in common-emitter configuration; conventional current flows into this pin during conduction; the emitter current equals the sum of collector and base currents (IE = IC + IB)<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 3<\/td> | Collector<\/td> | Output<\/td> | Collector terminal of the PNP transistor; current flows out of this pin to the load in common-emitter configuration; in saturation, the collector voltage approaches the emitter voltage minus VCE(sat); in cutoff, the collector voltage is determined by the external circuit<\/td><\/tr><\/tbody><\/table>","application_scenarios":"
|