El TLP291GB-TP.SE de Toshiba es un optoacoplador de salida de fototransistor de un solo canal en un encapsulado compacto SOP-4 (SO4) (2,6 x 7,0 x 2,1 mm). Consta de un diodo emisor de infrarrojos de arseniuro de galio acoplado \u00f3pticamente a un fototransistor, que proporciona una tensi\u00f3n de aislamiento m\u00ednima de 3750 Vrms. El rango GB especifica una relaci\u00f3n de transferencia de corriente (CTR) de 100% a 400% a IF=5mA, VCE=5V. Especificaciones clave: tensi\u00f3n colector-emisor 80V, corriente de avance 50mA, corriente de colector 50mA, VCE(sat) 0,3V m\u00e1x, tensi\u00f3n inversa 5V, potencia total disipada 200mW. Caracter\u00edsticas de conmutaci\u00f3n: tiempo de subida t\u00edpico 2-4us, tiempo de bajada 3-7us. Temperatura de funcionamiento: -55 a 110C. Homologaciones de seguridad: UL 1577, cUL, EN 60747-5-5 (VDE), EN IEC 62368-1 (VDE), GB 4943.1-2022 (CQC). Creepage\/clearance: 5,0 mm m\u00ednimo. El sufijo TP indica embalaje en cinta y carrete (2500 unidades\/carrete), el sufijo SE indica versi\u00f3n mejorada. Estado: No recomendado para nuevos dise\u00f1os (Toshiba recomienda TLP291(SE o TLP293 como sustitutos). Cumple la directiva RoHS.<\/p>","protected":false},"excerpt":{"rendered":"
The TLP291GB-TP.SE from Toshiba is a single-channel phototransistor output optocoupler in a compact SOP-4 (SO4) package (2.6 x 7.0 x 2.1 mm). It consists of a gallium arsenide infrared emitting diode optically coupled to a phototransistor, providing 3750 Vrms minimum isolation voltage. The GB rank specifies a current transfer ratio (CTR) of 100% to 400% […]<\/p>\n","protected":false},"author":2,"featured_media":2854,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[51,48],"tags":[],"chip_brand":[169],"class_list":["post-1902","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-optocouplers-photocouplers","category-optoelectronic-devices","chip_brand-toshiba"],"acf":{"brief_explanation":"1-ch phototransistor optocoupler, CTR 100-400% (GB rank), 3750Vrms isolation, SOP-4, -55~110C, NRND","date_code":"","package_case":"SOP-4 \/ SO4 (2.6 x 7.0 x 2.1 mm), 11-3C1","in_stock":153100,"datasheet":"https:\/\/toshiba.semicon-storage.com\/info\/docget.jsp?did=11183","price":"$0.055 (1K+ pcs, LCSC)","product_introduction":"The TLP291GB-TP.SE from Toshiba is a single-channel phototransistor output optocoupler housed in an ultra-thin SOP-4 (SO4) package measuring just 2.6 x 7.0 x 2.1 mm. The device consists of a gallium arsenide (GaAs) infrared emitting diode (IRED) optically coupled to a silicon NPN phototransistor, providing galvanic isolation between input and output circuits.\n\nThe GB rank designation specifies a current transfer ratio (CTR) range of 100% to 400% at IF=5mA and VCE=5V at 25C, meaning the phototransistor collector current equals 1x to 4x the LED forward current. This relatively high CTR range makes the GB rank suitable for low-current drive applications where the input LED current budget is limited, such as microcontroller GPIO-driven isolation circuits.\n\nKey electrical specifications include: collector-emitter breakdown voltage (VCEO) of 80V minimum, forward current rating of 50mA maximum, collector current rating of 50mA maximum, collector-emitter saturation voltage (VCE(sat)) of 0.3V maximum at IC=2.4mA, IF=8mA, and total package power dissipation of 200mW. The input LED forward voltage is typically 1.25V at IF=5mA, with a maximum reverse voltage rating of 5V.\n\nThe device provides 3750 Vrms minimum isolation voltage (tested for 1 minute), making it suitable for reinforced insulation applications in power supplies, programmable logic controllers (PLCs), and communication interfaces. The creepage distance and clearance are both 5.0mm minimum, with insulation thickness of 0.4mm minimum, meeting the construction requirements for safety-certified optocouplers.\n\nSwitching characteristics include typical rise time of 2us and fall time of 3us (at VCC=10V, IC=2mA, RL=100 ohm), with turn-on time of 3us and turn-off time of 3us typical. These moderate switching speeds make the device suitable for signal isolation rather than high-speed data communication.\n\nThe TLP291GB-TP.SE carries comprehensive safety approvals: UL 1577 (File No. E67349), cUL (CSA Component Acceptance Service No. 5A), EN 60747-5-5 (VDE), EN IEC 62368-1 (VDE), and GB 4943.1-2022 (CQC). The VDE option (V4 suffix) provides additional certification with maximum operating insulation voltage of 707 Vpk and highest permissible overvoltage of 6000 Vpk.\n\nThe TP suffix indicates tape and reel packaging with 2500 units per reel, suitable for automated SMT assembly. The SE suffix denotes the enhanced version with improved switching characteristics. Note: Toshiba marks the TLP291 as Not Recommended for New Designs and recommends TLP291(SE or TLP293 as replacement products for new designs. The device operates over a wide temperature range of -55C to 110C and is RoHS compliant.","working_principle":"The TLP291GB-TP.SE operates as a phototransistor output optocoupler, converting electrical input signals to optical signals and back to electrical signals to achieve galvanic isolation between circuits.\n\nInput Stage (LED): The input side consists of a gallium arsenide (GaAs) infrared emitting diode (IRED). When forward current (IF) flows through the LED, it emits infrared radiation at a wavelength of approximately 940nm. The forward voltage drop across the LED is typically 1.25V at IF=5mA. The LED must be driven with a current-limiting resistor calculated from the driving voltage: R = (VDRIVE - VF) \/ IF, where VF is the LED forward voltage. Typical drive currents range from 1mA to 20mA for signal isolation applications.\n\nOptical Coupling: The infrared light from the LED propagates across a transparent dielectric insulation layer within the package. This insulation layer provides the galvanic isolation barrier with a minimum thickness of 0.4mm, achieving 3750 Vrms isolation voltage. The optical coupling efficiency between the LED and phototransistor determines the current transfer ratio (CTR). For the GB rank, the CTR ranges from 100% to 400% at the specified test conditions, meaning IC = CTR x IF.\n\nOutput Stage (Phototransistor): The output side consists of a silicon NPN phototransistor. When infrared photons from the LED strike the phototransistor base-collector junction, they generate electron-hole pairs (photocurrent) in the base region. This photocurrent acts as the base drive for the NPN transistor, causing a larger collector current to flow. The phototransistor provides both photodetection and current amplification in a single device, which is why CTR can exceed 100% -- the phototransistor current gain (hFE) amplifies the initial photocurrent.\n\nCTR Behavior: The CTR is not constant and varies with: (1) Forward current IF -- CTR typically peaks at IF=5-10mA and decreases at both lower and higher currents; (2) Temperature -- CTR decreases at temperatures above 25C due to reduced LED efficiency and phototransistor gain; (3) Age -- CTR degrades over time due to LED output degradation, typically 10-20% over 10 years at rated current. Design margins must account for these variations, especially when using the GB rank 100% minimum CTR.\n\nSwitching Behavior: The phototransistor switching speed is limited by its relatively large junction area (needed for high photosensitivity) and charge storage effects. Rise time (tr) and fall time (tf) are typically 2-4us and 3-7us respectively. The turn-off is slower than turn-on because the phototransistor must clear stored base charge without a dedicated base pull-down resistor. For faster switching, a base-emitter resistor can be added, or a faster optocoupler architecture (e.g., photodiode + amplifier) should be selected.\n\nIsolation: The galvanic isolation is achieved by the physical separation between the LED and phototransistor chips, with only optical coupling bridging the gap. The isolation barrier withstands 3750 Vrms for 1 minute and provides continuous isolation at working voltages up to the rated insulation voltage. The parasitic capacitance across the isolation barrier (typically 0.5-1pF) limits common-mode transient immunity, while the isolation resistance exceeds 10^12 ohms.","pin_description":"
| Pin<\/th> | Name<\/th> | Type<\/th> | Description<\/th><\/tr><\/thead> | ||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1<\/td> | ANODE<\/td> | Input<\/td> | LED anode; connect to positive side of drive circuit through current-limiting resistor; forward current IF up to 50mA; forward voltage VF typically 1.25V at IF=5mA<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 2<\/td> | CATHODE<\/td> | Input<\/td> | LED cathode; connect to ground or negative side of drive circuit; reverse voltage must not exceed 5V<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 3<\/td> | EMITTER<\/td> | Output<\/td> | Phototransistor emitter; connect to output circuit ground or reference; collector current IC flows from collector (Pin 4) through the load to emitter<\/td><\/tr> | ||||||||||||||||||||||||||||||||||||
| 4<\/td> | COLLECTOR<\/td> | Output<\/td> | Phototransistor collector; connect through pull-up resistor to output supply voltage; VCEO maximum 80V; VCE(sat) maximum 0.3V at IC=2.4mA, IF=8mA<\/td><\/tr><\/tbody><\/table>","application_scenarios":"
|