{"id":10242,"date":"2026-07-09T08:33:17","date_gmt":"2026-07-09T08:33:17","guid":{"rendered":"https:\/\/materialparts.com\/is25lp016d-jnle-tr\/"},"modified":"2026-07-09T08:35:12","modified_gmt":"2026-07-09T08:35:12","slug":"is25lp016d-jnle-tr","status":"publish","type":"post","link":"https:\/\/materialparts.com\/es\/is25lp016d-jnle-tr\/","title":{"rendered":"IS25LP016D-JNLE-TR"},"content":{"rendered":"

Productos<\/h2>\n

The IS25LP016D-JNLE-TR is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications.<\/p>\n

Especificaciones<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Tipo de memoria<\/td>\nSPI NOR Flash<\/td>\n<\/tr>\n
Densidad<\/td>\n16Mbit (2MB)<\/td>\n<\/tr>\n
Organization<\/td>\n2M x 8<\/td>\n<\/tr>\n
Interface<\/td>\nSPI \/ Dual I\/O \/ Quad I\/O \/ QPI \/ DTR<\/td>\n<\/tr>\n
Max Clock Frequency<\/td>\n133 MHz<\/td>\n<\/tr>\n
DTR Mode Clock<\/td>\n66 MHz<\/td>\n<\/tr>\n
Tensi\u00f3n de alimentaci\u00f3n<\/td>\n2.3V to 3.6V (3V Typ)<\/td>\n<\/tr>\n
Active Read Current<\/td>\n4 mA (Typ)<\/td>\n<\/tr>\n
Standby Current<\/td>\n5 uA (Typ)<\/td>\n<\/tr>\n
Deep Power Down<\/td>\n1 uA (Typ)<\/td>\n<\/tr>\n
Page Size<\/td>\n256 bytes<\/td>\n<\/tr>\n
Sector\/Block Size<\/td>\n4KB \/ 32KB \/ 64KB uniform<\/td>\n<\/tr>\n
Program\/Erase Cycles<\/td>\n100,000<\/td>\n<\/tr>\n
Data Retention<\/td>\n20 Years<\/td>\n<\/tr>\n
Temperatura de funcionamiento<\/td>\n-40 C to +105 C (Extended)<\/td>\n<\/tr>\n
Paquete<\/td>\n8-SOIC (150mil \/ 3.90mm width)<\/td>\n<\/tr>\n
Embalaje<\/td>\nTape and Reel (3000 units)<\/td>\n<\/tr>\n
Security<\/td>\n4x256B OTP, 128-bit Unique ID, Power Supply Lock<\/td>\n<\/tr>\n<\/table>\n

Caracter\u00edsticas<\/h2>\n

16Mbit SPI NOR Flash with 3V supply (2.3-3.6V); Supports Standard\/Dual\/Quad SPI, QPI, and DTR modes; 133MHz clock in Quad I\/O; 66MHz DTR for 532 Mbps throughput; Uniform 4KB\/32KB\/64KB sector\/block erase; Program\/Erase Suspend and Resume; AutoBoot operation; Configurable drive strength and dummy cycles; QPI mode with 2-cycle instruction; 4×256-byte OTP security area; 128-bit unique ID; Power supply lock protection; Deep power down (1uA); SFDP support; Extended temperature to +105C; Industry-standard SOIC-8 pinout; Tape and reel packaging<\/p>\n

Aplicaciones<\/h2>\n

Embedded code storage (XIP); FPGA configuration; IoT devices and sensors; Industrial control systems; Consumer electronics; Smart meters; Communication modules; Automotive body electronics<\/p>","protected":false},"excerpt":{"rendered":"

Product Overview The IS25LP016D-JNLE-TR is a ISSI product designed for electronic applications. It features compact design with reliable performance characteristics suitable for various industrial and consumer applications. Key Specifications Memory Type SPI NOR Flash Density 16Mbit (2MB) Organization 2M x 8 Interface SPI \/ Dual I\/O \/ Quad I\/O \/ QPI \/ DTR Max Clock […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[39,13,4],"tags":[1496],"chip_brand":[210],"class_list":["post-10242","post","type-post","status-publish","format-standard","hentry","category-flash-memory-nand-nor-flash","category-integrated-circuits-ics","category-memory-chips","tag-is25lp016d-jnle-tr","chip_brand-issi"],"acf":{"brief_explanation":"16Mbit SPI NOR Flash, 3V, QSPI\/QPI, 133MHz, DTR, SOIC-8 150mil, -40 to 105C, TR","date_code":"","package_case":"8-SOIC (4.90 x 3.90 x 1.75 mm, 150mil)","in_stock":11082,"datasheet":"https:\/\/www.issi.com\/WW\/pdf\/25LP-WP016D.pdf","price":"$1.00 @ 1ku","product_introduction":"The IS25LP016D-JNLE-TR from ISSI is a 16Mbit (2MB) SPI NOR Flash memory device operating at 3V (2.3V to 3.6V), designed for code and data storage in cost-sensitive embedded applications. The LP designation indicates the 3V voltage family, distinguishing it from the 1.8V WP series. Despite its compact density, the device supports the full range of ISSI SPI interfaces including Standard SPI, Dual I\/O, Quad I\/O, QPI, and DTR modes, achieving up to 532 Mbps equivalent throughput in QPI mode at 133MHz. The JNLE package code specifies the 8-contact SOIC-8 (150mil \/ 3.9mm width) package, providing a widely available and cost-effective package choice. The -TR suffix indicates tape and reel packaging with 3000 units per reel for automated SMT production. The device features uniform 4KB, 32KB, and 64KB sector\/block erase, program\/erase suspend and resume, and AutoBoot for automatic data output after power-on. Security features include 4x256-byte OTP areas, a 128-bit unique device ID, and power supply lock protection. The extended temperature range of -40C to +105C makes it suitable for automotive and industrial environments.","working_principle":"The IS25LP016D-JNLE-TR operates through a 4-wire serial peripheral interface (CS#, SCK, SI\/IO0, SO\/IO1, with WP#\/IO2 and HOLD#\/IO3 for multi-I\/O modes). In Standard SPI mode, the host sends an 8-bit command followed by a 24-bit address on SI, and data is returned on SO. In Quad I\/O mode, all four I\/O pins transfer both addresses and data, quadrupling bandwidth. QPI mode uses 4-bit instruction encoding to reduce the command phase to just 2 clock cycles. DTR transfers data on both clock edges for double the per-pin data rate. The memory array is organized as 4KB uniform sectors, with 32KB and 64KB block erase options for efficient bulk operations. Programming loads 1 to 256 bytes into a page buffer before the internal state machine writes to the flash cells. Program\/erase suspend allows interrupting a long erase operation to perform a read from a different sector, enabling real-time response in embedded systems. The AutoBoot feature automatically outputs a configured data block after power-on, reducing boot time by eliminating the command overhead. The HOLD# pin pauses serial communication without deselecting the device, useful for sharing the SPI bus with multiple devices.","pin_description":"
Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
1<\/td>CS#<\/td>Input<\/td>Active-low chip select; selects the device for SPI operations<\/td><\/tr>
2<\/td>SO\/IO1<\/td>I\/O<\/td>Serial data output in SPI; IO1 in Dual\/Quad\/QPI modes<\/td><\/tr>
3<\/td>WP#\/IO2<\/td>I\/O<\/td>Write protect in SPI; IO2 in Quad\/QPI modes<\/td><\/tr>
4<\/td>VSS<\/td>Power<\/td>Ground reference<\/td><\/tr>
5<\/td>SI\/IO0<\/td>I\/O<\/td>Serial data input in SPI; IO0 in Dual\/Quad\/QPI modes<\/td><\/tr>
6<\/td>SCK<\/td>Input<\/td>Serial clock; controls data transfer timing up to 133MHz<\/td><\/tr>
7<\/td>HOLD#\/IO3<\/td>I\/O<\/td>Hold in SPI; IO3 in Quad\/QPI modes<\/td><\/tr>
8<\/td>VCC<\/td>Power<\/td>Power supply (2.3V to 3.6V)<\/td><\/tr><\/table>","application_scenarios":"
  • Embedded XIP Code Storage:<\/strong> Stores MCU firmware with 133MHz Quad I\/O enabling execute-in-place from the flash, eliminating the need to copy code to RAM.<\/li>
  • FPGA Configuration:<\/strong> Stores FPGA configuration bitstream with AutoBoot for rapid power-on configuration in industrial and consumer applications.<\/li>
  • IoT Sensor Nodes:<\/strong> Provides 2MB of non-volatile storage for firmware and sensor data with 1uA deep power down and 3V operation from battery or energy harvesting.<\/li>
  • Industrial Control:<\/strong> Stores PLC and motor controller firmware with program\/erase suspend enabling real-time reads during firmware updates.<\/li><\/ul>","alternative_models":"
    Manufacturer<\/th>Part Number<\/th>Package<\/th>Density<\/th>Notes<\/th><\/tr>
    ISSI<\/td>IS25WP016D-JNLE-TR<\/td>SOIC-8<\/td>16Mbit<\/td>1.8V version (1.65-1.95V)<\/td><\/tr>
    ISSI<\/td>IS25LP016D-JBLE-TR<\/td>SOIC-8 208mil<\/td>16Mbit<\/td>Wide SOIC-8 (208mil) package<\/td><\/tr>
    Macronix<\/td>MX25L1606EMRI<\/td>SOIC-8<\/td>16Mbit<\/td>Industry-standard pin-compatible<\/td><\/tr>
    Winbond<\/td>W25Q16JVSSIQ<\/td>SOIC-8<\/td>16Mbit<\/td>Popular pin-compatible alternative<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/10242","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/comments?post=10242"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/10242\/revisions"}],"predecessor-version":[{"id":10252,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/posts\/10242\/revisions\/10252"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/media?parent=10242"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/categories?post=10242"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/tags?post=10242"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/es\/wp-json\/wp\/v2\/chip_brand?post=10242"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}