{"id":9648,"date":"2026-07-05T08:30:00","date_gmt":"2026-07-05T08:30:00","guid":{"rendered":"https:\/\/materialparts.com\/hcpl-0630-500e\/"},"modified":"2026-07-05T08:30:00","modified_gmt":"2026-07-05T08:30:00","slug":"hcpl-0630-500e","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/hcpl-0630-500e\/","title":{"rendered":"HCPL-0630-500E"},"content":{"rendered":"

\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n

The HCPL-0630-500E is a dual-channel high-speed optocoupler from Broadcom (formerly Avago Technologies), providing 3750Vrms isolation per IEC 60747-5-2. Each channel contains a GaAsP LED optically coupled to an integrated photodetector with open-collector output, achieving 15MBd data rate with 45ns propagation delay. The 500E suffix denotes tape and reel packaging in a 16-lead SOIC package rated for -40\u00b0C to +100\u00b0C.<\/p>\n

\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0642\u0646\u0648\u0627\u062a<\/td>\n2 (Dual)<\/td>\n<\/tr>\n
\u0645\u0639\u062f\u0644 \u0627\u0644\u0628\u064a\u0627\u0646\u0627\u062a<\/td>\n15 MBd<\/td>\n<\/tr>\n
\u062a\u0623\u062e\u064a\u0631 \u0627\u0644\u0627\u0646\u062a\u0634\u0627\u0631<\/td>\n45 ns (Max)<\/td>\n<\/tr>\n
\u062c\u0647\u062f \u0627\u0644\u0639\u0632\u0644<\/td>\n3750 Vrms<\/td>\n<\/tr>\n
CTR (Current Transfer Ratio)<\/td>\nMin 19%<\/td>\n<\/tr>\n
LED Forward Current (IF)<\/td>\n10 mA (Recommended)<\/td>\n<\/tr>\n
\u062a\u0647\u064a\u0626\u0629 \u0627\u0644\u0645\u062e\u0631\u062c\u0627\u062a<\/td>\nOpen Collector<\/td>\n<\/tr>\n
CMRRR<\/td>\n15 kV\/\u03bcs (Min)<\/td>\n<\/tr>\n
\u062c\u0647\u062f \u0627\u0644\u0625\u0645\u062f\u0627\u062f<\/td>\n4.5V to 5.5V<\/td>\n<\/tr>\n
\u0627\u0644\u062d\u0632\u0645\u0629<\/td>\n16-Lead SOIC (300mil)<\/td>\n<\/tr>\n
\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n-40\u00b0C to +100\u00b0C<\/td>\n<\/tr>\n
Packing<\/td>\nTape & Reel (500E)<\/td>\n<\/tr>\n<\/table>\n

\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n
    \n
  • Dual-channel isolation in a single 16-SOIC package for space savings<\/li>\n
  • 15MBd data rate for high-speed digital signal isolation<\/li>\n
  • 45ns maximum propagation delay for minimal latency<\/li>\n
  • 3750Vrms isolation voltage per IEC 60747-5-2<\/li>\n
  • Open-collector output for flexible interface logic levels<\/li>\n
  • 15kV\/\u03bcs common mode rejection for noisy environments<\/li>\n
  • Stable CTR over temperature and time<\/li>\n<\/ul>\n

    \u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n
      \n
    • Digital isolation for SPI, I2C, and UART interfaces<\/li>\n
    • Motor drive logic signal isolation<\/li>\n
    • Inverter and power supply feedback isolation<\/li>\n
    • Industrial network isolation (RS-485, CAN)<\/li>\n
    • Medical equipment patient isolation<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The HCPL-0630-500E is a dual-channel high-speed optocoupler from Broadcom (formerly Avago Technologies), providing 3750Vrms isolation per IEC 60747-5-2. Each channel contains a GaAsP LED optically coupled to an integrated photodetector with open-collector output, achieving 15MBd data rate with 45ns propagation delay. The 500E suffix denotes tape and reel packaging in a 16-lead SOIC […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[19,13],"tags":[918],"chip_brand":[198],"class_list":["post-9648","post","type-post","status-publish","format-standard","hentry","category-analog-linear-ics","category-integrated-circuits-ics","tag-hcpl-0630-500e","chip_brand-broadcom"],"acf":{"brief_explanation":"Dual 15MBd high-speed optocoupler, 3750Vrms, 45ns, open-collector, 16-SOIC, T&R","date_code":"","package_case":"SOIC-16 (10.3 x 7.5 x 2.65 mm, 300mil)","in_stock":11300,"datasheet":"https:\/\/www.broadcom.com\/products\/optocouplers\/industrial-plastic\/digital-optocouplers\/hcpl-0630","price":"$2.40 @ 1ku","product_introduction":"The Broadcom HCPL-0630-500E is a dual-channel high-speed digital optocoupler that provides electrical isolation of 3750Vrms while transmitting digital signals at data rates up to 15MBd. Each channel consists of a GaAsP LED optically coupled to a PIN photodiode and high-gain amplifier driving an open-collector output transistor. The 45ns maximum propagation delay makes it suitable for high-speed bus and interface isolation applications. The dual-channel configuration in a 16-lead SOIC package provides two isolated channels in the board space of a single wide-body SOIC, reducing cost and board area compared to two single-channel devices. The 500E suffix specifies tape and reel packaging for automated SMT assembly.","working_principle":"The HCPL-0630-500E uses optical coupling to transmit digital signals across an isolation barrier. When the input LED is forward biased (IF \u2248 10mA), it emits infrared light at approximately 660nm wavelength. This light passes through the transparent isolation dielectric and illuminates the PIN photodiode on the output side. The photodiode converts the optical signal back to a photocurrent, which is amplified by the high-gain transimpedance amplifier and drives the open-collector output transistor. When the LED is off, no light reaches the photodiode and the output transistor is off, allowing the output to be pulled high by an external pull-up resistor. The internal shield between input and output provides 15kV\/\u03bcs common mode rejection, ensuring reliable operation in high-noise environments such as motor drive circuits.","pin_description":"
      Pin<\/th>Name<\/th>Type<\/th>Function<\/th><\/tr>
      1<\/td>ANODE1<\/td>Input<\/td>Channel 1 LED anode<\/td><\/tr>
      2<\/td>CATHODE1<\/td>Input<\/td>Channel 1 LED cathode<\/td><\/tr>
      3<\/td>ANODE2<\/td>Input<\/td>Channel 2 LED anode<\/td><\/tr>
      4<\/td>CATHODE2<\/td>Input<\/td>Channel 2 LED cathode<\/td><\/tr>
      5<\/td>GND2<\/td>Power<\/td>Output side ground<\/td><\/tr>
      6<\/td>VO2<\/td>Output<\/td>Channel 2 open-collector output<\/td><\/tr>
      7<\/td>VE2<\/td>Input<\/td>Channel 2 output enable (active high)<\/td><\/tr>
      8<\/td>VCC2<\/td>Power<\/td>Output side supply (4.5-5.5V)<\/td><\/tr>
      9<\/td>VE1<\/td>Input<\/td>Channel 1 output enable (active high)<\/td><\/tr>
      10<\/td>VO1<\/td>Output<\/td>Channel 1 open-collector output<\/td><\/tr>
      11<\/td>GND2<\/td>Power<\/td>Output side ground<\/td><\/tr>
      12-16<\/td>NC<\/td>-<\/td>No connect<\/td><\/tr><\/table>","application_scenarios":"
      • SPI, I2C, and UART digital interface isolation<\/li>
      • Motor drive signal isolation and level shifting<\/li>
      • Inverter feedback loop isolation (voltage\/current sensing)<\/li>
      • Industrial fieldbus isolation (RS-485, CAN bus)<\/li>
      • Medical device patient-side signal isolation<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        Broadcom<\/td>HCPL-063N-500E<\/td>SOIC-16<\/td>25MBd higher speed variant<\/td><\/tr>
        Toshiba<\/td>TLP2745<\/td>SOIC-16<\/td>Dual 15MBd optocoupler<\/td><\/tr>
        Silicon Labs<\/td>Si862x<\/td>SOIC-16<\/td>Dual digital isolator, capacitive<\/td><\/tr>
        TI<\/td>ISO7721<\/td>SOIC-16<\/td>Dual digital isolator, capacitive<\/td><\/tr>
        Broadcom<\/td>ACPL-064L-500E<\/td>SOIC-16<\/td>Dual 25MBd, lower power<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/9648","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=9648"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/9648\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=9648"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=9648"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=9648"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=9648"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}