{"id":9176,"date":"2026-07-02T12:21:46","date_gmt":"2026-07-02T12:21:46","guid":{"rendered":"https:\/\/materialparts.com\/bts70402epaxuma1\/"},"modified":"2026-07-02T12:21:46","modified_gmt":"2026-07-02T12:21:46","slug":"bts70402epaxuma1","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/bts70402epaxuma1\/","title":{"rendered":"BTS70402EPAXUMA1"},"content":{"rendered":"

\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n

The BTS70402EPAXUMA1 is an Infineon PROFET\u2122+2 12V dual-channel smart high-side power switch in PG-TSDSO-14 package. Each channel features 40m\u03a9 on-resistance (typ. 19m\u03a9 at 25\u00b0C), 3.5A nominal load current, proportional load current sensing, and comprehensive protection including over-current, over-temperature, and short-circuit diagnostics. AEC-Q100 Grade 1 qualified and ISO 26262-ready.<\/p>\n

\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u0642\u0646\u0648\u0627\u062a<\/td>\n2 (dual high-side switch)<\/td>\n<\/tr>\n
On-Resistance (RDS(on))<\/td>\n19m\u03a9 typ. (25\u00b0C); 36m\u03a9 max. (150\u00b0C)<\/td>\n<\/tr>\n
Nominal Load Current (per channel)<\/td>\n3.5A @ TA=85\u00b0C<\/td>\n<\/tr>\n
Current Limit Range<\/td>\n34A to 45A (short circuit)<\/td>\n<\/tr>\n
Operating Voltage Range<\/td>\n3.1V to 28V (4.1V switch-on)<\/td>\n<\/tr>\n
Current Sense Ratio (kILIS)<\/td>\n1800 (typical)<\/td>\n<\/tr>\n
\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n-40\u00b0C to +150\u00b0C<\/td>\n<\/tr>\n
\u0627\u0644\u0645\u0624\u0647\u0644\u0627\u062a<\/td>\nAEC-Q100 Grade 1; ISO 26262-ready<\/td>\n<\/tr>\n<\/table>\n

\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n
    \n
  • PROFET\u2122+2 12V family member<\/li>\n
  • Dual-channel high-side switch with 19m\u03a9 typ. on-resistance<\/li>\n
  • Reverse ON for low power dissipation during reverse battery<\/li>\n
  • Proportional load current sense output (kILIS = 1800)<\/li>\n
  • Open load detection in ON and OFF state<\/li>\n
  • Short circuit to ground and battery detection<\/li>\n
  • Over-temperature protection with controlled restart<\/li>\n
  • Over-current protection with intelligent restart control<\/li>\n
  • Under-voltage shutdown<\/li>\n
  • Over-voltage protection with external components<\/li>\n
  • Diagnostic enable (DEN) and channel select (DSEL) for SPI-less diagnosis<\/li>\n
  • SMART7 technology<\/li>\n<\/ul>\n

    \u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n
      \n
    • ADAS domain controller power distribution<\/li>\n
    • Automotive body electronics (lighting, HVAC)<\/li>\n
    • Instrument cluster power switches<\/li>\n
    • Bulb and LED lamp drivers<\/li>\n
    • Automotive relay and fuse replacement<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The BTS70402EPAXUMA1 is an Infineon PROFET\u2122+2 12V dual-channel smart high-side power switch in PG-TSDSO-14 package. Each channel features 40m\u03a9 on-resistance (typ. 19m\u03a9 at 25\u00b0C), 3.5A nominal load current, proportional load current sensing, and comprehensive protection including over-current, over-temperature, and short-circuit diagnostics. AEC-Q100 Grade 1 qualified and ISO 26262-ready. Key Specifications Channels 2 (dual […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,35],"tags":[],"chip_brand":[173],"class_list":["post-9176","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-power-switches","chip_brand-infineon"],"acf":{"brief_explanation":"AEC-Q100 G1 dual 40m\u03a9 smart high-side switch, 3.5A\/ch, current sense, ISO 26262-ready, TSDSO-14","date_code":"","package_case":"PG-TSDSO-14 (4.9 x 3.9 x 0.95 mm)","in_stock":4759,"datasheet":"https:\/\/www.infineon.com\/cms\/en\/product\/power\/smart-high-side-switch\/bts7040-2epa\/","price":"$0.78 @ 3ku","product_introduction":"The BTS70402EPAXUMA1 is an Infineon PROFET\u2122+2 12V dual-channel smart high-side power switch in PG-TSDSO-14 package. Each channel features 19m\u03a9 typical on-resistance, 3.5A nominal load current at 85\u00b0C, and proportional current sensing with kILIS=1800. Built on SMART7 technology, it provides over-temperature protection with controlled restart, over-current protection with intelligent restart, open\/short load detection, and under-voltage shutdown. AEC-Q100 Grade 1 qualified and ISO 26262-ready, it is ideal for ADAS domain controllers, body electronics, and instrument cluster power distribution.","working_principle":"The BTS70402EPAXUMA1 operates as a dual-channel smart high-side power switch. Each channel contains a power DMOS transistor, charge pump, and protection circuitry. The INx pins control the channel on\/off state. The charge pump generates a gate voltage above the supply rail to drive the N-channel DMOS, ensuring low RDS(on) even at low battery voltages. The IS pin provides a proportional current sense output: the sense current through IS equals the load current divided by kILIS (1800), allowing the MCU to monitor load current via an external resistor. The DEN and DSEL pins enable diagnosis without SPI: DEN enables the diagnostic output, and DSEL selects which channel's diagnosis appears on the IS pin. Over-temperature protection uses two mechanisms: absolute over-temperature shutdown for critical conditions, and dynamic over-temperature with controlled restart that reduces duty cycle during thermal stress. Over-current protection trips at 34-45A and uses intelligent restart to prevent MOSFET damage during persistent faults.","pin_description":"
      Pin<\/th>Mnemonic<\/th>Description<\/th><\/tr>
      1<\/td>GND<\/td>Ground<\/td><\/tr>
      2<\/td>IN0<\/td>Input channel 0 (active high)<\/td><\/tr>
      3<\/td>DEN<\/td>Diagnostic enable (active high)<\/td><\/tr>
      4<\/td>IS<\/td>Current sense output (analog)<\/td><\/tr>
      5<\/td>DSEL<\/td>Diagnosis channel select<\/td><\/tr>
      6<\/td>IN1<\/td>Input channel 1 (active high)<\/td><\/tr>
      7<\/td>N.C.<\/td>Not connected<\/td><\/tr>
      8-10<\/td>OUT0<\/td>Output channel 0 (connect together on PCB)<\/td><\/tr>
      11<\/td>N.C.<\/td>Not connected<\/td><\/tr>
      12-14<\/td>OUT1<\/td>Output channel 1 (connect together on PCB)<\/td><\/tr>
      EP<\/td>VS<\/td>Exposed pad (battery supply)<\/td><\/tr><\/table>","application_scenarios":"
      • ADAS domain controller dual-channel power distribution with 3.5A per channel and ISO 26262<\/li>\n
      • Automotive body lighting module with open\/short load detection and current monitoring<\/li>\n
      • Instrument cluster power switch with proportional current sense for load health monitoring<\/li>\n
      • HVAC blower and valve driver with over-temperature controlled restart<\/li>\n
      • Automotive P27W+R5W bulb driver with 34-45A short circuit current limit<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
        BTS70015-1EPA<\/td>Infineon<\/td>Single channel, 15m\u03a9, PROFET+2<\/td><\/tr>
        TPS1H100AQPWPRQ1<\/td>TI<\/td>Single channel, 100m\u03a9, with SPI<\/td><\/tr>
        NCV8402<\/td>onsemi<\/td>Single channel, 150m\u03a9, self-limiting<\/td><\/tr>
        VN5R003H-E<\/td>ST<\/td>Single channel, 3m\u03a9, VIPower<\/td><\/tr>
        BTS7040-2ESA<\/td>Infineon<\/td>Same function, different package variant<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/9176","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=9176"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/9176\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=9176"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=9176"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=9176"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=9176"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}