{"id":8607,"date":"2026-06-29T06:56:37","date_gmt":"2026-06-29T06:56:37","guid":{"rendered":"https:\/\/materialparts.com\/pic16f1513-i-so\/"},"modified":"2026-06-29T06:56:37","modified_gmt":"2026-06-29T06:56:37","slug":"pic16f1513-i-so","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/pic16f1513-i-so\/","title":{"rendered":"PIC16F1513-I\/SO"},"content":{"rendered":"<h2>\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n<p>The Microchip PIC16F1513-I\/SO is an 8-bit enhanced mid-range Flash microcontroller with 7 KB program memory and 256 bytes of RAM, packaged in a 28-pin SOIC. Operating from 2.3 V to 5.5 V, it integrates a 10-bit ADC with 17 channels, two CCP modules, EUSART, SPI, and I2C interfaces, targeting cost-sensitive embedded control applications.<\/p>\n<h2>\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n<table>\n<tr>\n<td>\u0627\u0644\u0623\u0633\u0627\u0633\u064a\u0627\u062a<\/td>\n<td>PIC16 Enhanced Mid-range<\/td>\n<\/tr>\n<tr>\n<td>\u0630\u0627\u0643\u0631\u0629 \u0627\u0644\u0628\u0631\u0646\u0627\u0645\u062c<\/td>\n<td>7 KB Flash<\/td>\n<\/tr>\n<tr>\n<td>RAM<\/td>\n<td>256 bytes<\/td>\n<\/tr>\n<tr>\n<td>Operating Speed<\/td>\n<td>20 MHz<\/td>\n<\/tr>\n<tr>\n<td>\u062c\u0647\u062f \u0627\u0644\u0625\u0645\u062f\u0627\u062f<\/td>\n<td>2.3 V to 5.5 V<\/td>\n<\/tr>\n<tr>\n<td>ADC<\/td>\n<td>10-bit, 17 channels<\/td>\n<\/tr>\n<tr>\n<td>\u0627\u0644\u062d\u0632\u0645\u0629<\/td>\n<td>SOIC-28 (7.5 x 10.3 mm)<\/td>\n<\/tr>\n<\/table>\n<h2>\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n<ul>\n<li>Enhanced mid-range core with 49 instructions and 16-level stack<\/li>\n<li>7 KB Flash with self-read\/write capability<\/li>\n<li>10-bit ADC with 17 channels and CVD for capacitive touch<\/li>\n<li>EUSART with auto-baud detection<\/li>\n<li>Master SPI and I2C (MI2C) interfaces<\/li>\n<li>Two CCP (Capture\/Compare\/PWM) modules<\/li>\n<li>25 mA source\/sink per I\/O pin<\/li>\n<\/ul>\n<h2>\u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n<ul>\n<li>Appliance control panels<\/li>\n<li>Capacitive touch sensing interfaces<\/li>\n<li>Motor control in small appliances<\/li>\n<li>Industrial sensor nodes<\/li>\n<li>Automotive body electronics<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The Microchip PIC16F1513-I\/SO is an 8-bit enhanced mid-range Flash microcontroller with 7 KB program memory and 256 bytes of RAM, packaged in a 28-pin SOIC. Operating from 2.3 V to 5.5 V, it integrates a 10-bit ADC with 17 channels, two CCP modules, EUSART, SPI, and I2C interfaces, targeting cost-sensitive embedded control applications. [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,25],"tags":[],"chip_brand":[134],"class_list":["post-8607","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-microcontrollers-mcu","chip_brand-microchip"],"acf":{"brief_explanation":"8-bit MCU, 7KB Flash, 256B RAM, 20MHz, 10-bit 17ch ADC, EUSART\/SPI\/I2C, SOIC-28","date_code":"","package_case":"SOIC-28 (7.5 x 10.3 mm)","in_stock":6148,"datasheet":"https:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/40001624D.pdf","price":"$1.43 @ 1ku","product_introduction":"The PIC16F1513-I\/SO from Microchip Technology is an 8-bit Flash microcontroller based on the enhanced mid-range PIC16 core, offering 49 instructions and 16-level hardware stack. With 7 KB of Flash program memory and 256 bytes of RAM, it provides sufficient resources for embedded control applications. The device integrates a 10-bit ADC with 17 channels featuring Hardware Capacitive Voltage Divider (CVD) for touch sensing, two CCP modules for PWM generation, and standard communication interfaces including EUSART with auto-baud, Master SPI, and I2C. The wide operating voltage range of 2.3 V to 5.5 V enables use in both 3.3 V and 5 V systems.","working_principle":"The PIC16F1513-I\/SO operates on Microchip's enhanced mid-range architecture with a 14-bit instruction word. The CPU fetches instructions from Flash memory and executes them in a single cycle (200 ns at 20 MHz), with program branching taking two cycles. The 16-level hardware stack supports nested subroutine calls and interrupt handling. The ADC uses a successive approximation register (SAR) architecture with a 10-bit resolution, performing conversions in approximately 26 \u00b5s. The CVD module enables capacitive touch sensing by performing double sample conversions with inverted acquisition phases. The EUSART module supports synchronous and asynchronous serial communication with automatic baud rate detection. The CCP modules provide capture, compare, and 10-bit PWM functionality for timer-based control and motor drive applications.","pin_description":"<table>\n<tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr>\n<tr><td>1<\/td><td>MCLR\/VPP<\/td><td>Input<\/td><td>Master clear reset \/ programming voltage<\/td><\/tr>\n<tr><td>2<\/td><td>RA0\/AN0<\/td><td>I\/O<\/td><td>Port A bit 0 \/ ADC channel 0<\/td><\/tr>\n<tr><td>3<\/td><td>RA1\/AN1<\/td><td>I\/O<\/td><td>Port A bit 1 \/ ADC channel 1<\/td><\/tr>\n<tr><td>4<\/td><td>RA2\/AN2\/VREF<\/td><td>I\/O<\/td><td>Port A bit 2 \/ ADC channel 2 \/ voltage reference<\/td><\/tr>\n<tr><td>5<\/td><td>RA3\/AN3<\/td><td>I\/O<\/td><td>Port A bit 3 \/ ADC channel 3<\/td><\/tr>\n<tr><td>8<\/td><td>RA6\/OSC2<\/td><td>I\/O<\/td><td>Port A bit 6 \/ oscillator output<\/td><\/tr>\n<tr><td>9<\/td><td>RA7\/OSC1<\/td><td>I\/O<\/td><td>Port A bit 7 \/ oscillator input<\/td><\/tr>\n<tr><td>10<\/td><td>VSS<\/td><td>Power<\/td><td>Ground<\/td><\/tr>\n<tr><td>11<\/td><td>RB4\/AN10\/SDA<\/td><td>I\/O<\/td><td>Port B bit 4 \/ I2C data<\/td><\/tr>\n<tr><td>14<\/td><td>RB7\/PGD<\/td><td>I\/O<\/td><td>Port B bit 7 \/ ICSP data<\/td><\/tr>\n<tr><td>15<\/td><td>RB6\/PGC<\/td><td>I\/O<\/td><td>Port B bit 6 \/ ICSP clock<\/td><\/tr>\n<tr><td>17<\/td><td>RC0\/T1OSO<\/td><td>I\/O<\/td><td>Port C bit 0 \/ Timer1 oscillator output<\/td><\/tr>\n<tr><td>19<\/td><td>RC2\/CCP1<\/td><td>I\/O<\/td><td>Port C bit 2 \/ CCP module 1<\/td><\/tr>\n<tr><td>20<\/td><td>RC3\/SCL<\/td><td>I\/O<\/td><td>Port C bit 3 \/ I2C clock<\/td><\/tr>\n<tr><td>22<\/td><td>RC5\/SDO<\/td><td>I\/O<\/td><td>Port C bit 5 \/ SPI data out<\/td><\/tr>\n<tr><td>23<\/td><td>RC6\/TX\/CK<\/td><td>I\/O<\/td><td>Port C bit 6 \/ EUSART transmit<\/td><\/tr>\n<tr><td>24<\/td><td>RC7\/RX\/DT<\/td><td>I\/O<\/td><td>Port C bit 7 \/ EUSART receive<\/td><\/tr>\n<tr><td>20<\/td><td>VDD<\/td><td>Power<\/td><td>Positive supply<\/td><\/tr>\n<\/table>","application_scenarios":"<ul>\n<li>White goods appliance control with capacitive touch buttons<\/li>\n<li>Small motor speed control using CCP PWM output<\/li>\n<li>Remote sensor node with EUSART and I2C interfaces<\/li>\n<li>Automotive body controller (AEC-Q100 qualified)<\/li>\n<li>Industrial I\/O expander with analog sensing<\/li>\n<\/ul>","alternative_models":"<table>\n<tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Flash<\/th><th>RAM<\/th><th>Notes<\/th><\/tr>\n<tr><td>Microchip<\/td><td>PIC16F1512-I\/SO<\/td><td>3.5 KB<\/td><td>128 B<\/td><td>Smaller memory variant<\/td><\/tr>\n<tr><td>Microchip<\/td><td>PIC16F1516-I\/SO<\/td><td>14 KB<\/td><td>512 B<\/td><td>Larger memory variant<\/td><\/tr>\n<tr><td>ST<\/td><td>STM8S003F3P6<\/td><td>8 KB<\/td><td>1 KB<\/td><td>Alternative 8-bit MCU<\/td><\/tr>\n<tr><td>Microchip<\/td><td>ATtiny814<\/td><td>8 KB<\/td><td>512 B<\/td><td>Modern AVR alternative<\/td><\/tr>\n<\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/8607","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=8607"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/8607\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=8607"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=8607"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=8607"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=8607"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}