{"id":7645,"date":"2026-06-26T07:07:21","date_gmt":"2026-06-26T07:07:21","guid":{"rendered":"https:\/\/materialparts.com\/sn65hvd1050dr\/"},"modified":"2026-06-26T14:12:00","modified_gmt":"2026-06-26T14:12:00","slug":"sn65hvd1050dr","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/sn65hvd1050dr\/","title":{"rendered":"SN65HVD1050DR"},"content":{"rendered":"

\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n

The SN65HVD1050DR from Texas Instruments is a 5Mbps CAN FD transceiver with I\/O voltage range support and reference voltage in SOIC-8.<\/p>\n

\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n\n\n\n\n\n\n\n\n\n\n
\u0645\u0639\u062f\u0644 \u0627\u0644\u0628\u064a\u0627\u0646\u0627\u062a<\/td>\nUp to 5 Mbps (CAN FD)<\/td>\n<\/tr>\n
Supply (VCC)<\/td>\n4.5-5.5V<\/td>\n<\/tr>\n
I\/O Voltage (VIO)<\/td>\n2.8-5.5V<\/td>\n<\/tr>\n
Common Mode Range<\/td>\n+\/-12V on bus<\/td>\n<\/tr>\n
ESD<\/td>\n+\/-12 kV HBM (bus)<\/td>\n<\/tr>\n
\u0627\u0644\u062a\u064a\u0627\u0631 \u0627\u0644\u0627\u062d\u062a\u064a\u0627\u0637\u064a<\/td>\n4 uA typical<\/td>\n<\/tr>\n
Loop Time<\/td>\n200 ns max<\/td>\n<\/tr>\n
\u0627\u0644\u062d\u0632\u0645\u0629<\/td>\nSOIC-8<\/td>\n<\/tr>\n
\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n-40 to +125 C<\/td>\n<\/tr>\n<\/table>\n

\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n
    \n
  • CAN FD fast phase up to 5Mbps<\/li>\n
  • VIO pin for 3.3V\/5V MCU direct connection<\/li>\n
  • 4uA ultra-low standby current<\/li>\n
  • +\/-12kV ESD on CAN bus pins<\/li>\n
  • Reference voltage output (VCC\/2)<\/li>\n<\/ul>\n

    \u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n
      \n
    • Automotive CAN FD networks<\/li>\n
    • Industrial CAN bus systems<\/li>\n
    • Building automation<\/li>\n
    • Medical equipment networking<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The SN65HVD1050DR from Texas Instruments is a 5Mbps CAN FD transceiver with I\/O voltage range support and reference voltage in SOIC-8. Key Specifications Data Rate Up to 5 Mbps (CAN FD) Supply (VCC) 4.5-5.5V I\/O Voltage (VIO) 2.8-5.5V Common Mode Range +\/-12V on bus ESD +\/-12 kV HBM (bus) Standby Current 4 uA […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,20],"tags":[],"chip_brand":[138],"class_list":["post-7645","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-interface-ics","chip_brand-ti"],"acf":{"brief_explanation":"CAN FD transceiver, 5Mbps, VIO pin, SOIC-8","date_code":"","package_case":"SOIC-8 (4.90 x 3.90 x 1.25 mm)","in_stock":12000,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/sn65hvd1050.pdf","price":"$0.88 @ 1ku","product_introduction":"The SN65HVD1050DR from Texas Instruments is a 5Mbps CAN FD transceiver in SOIC-8. The VIO pin allows direct connection to 3.3V or 5V MCU logic without level shifting. The device supports CAN FD fast phase up to 5Mbps and complies with ISO 11898-2. Ultra-low 4uA standby current with bus wake-up capability enables always-on automotive applications. The +\/-12kV ESD protection on bus pins provides robustness against automotive transients. A VREF output (VCC\/2) is available for bus termination biasing.","working_principle":"The SN65HVD1050DR operates as a CAN physical layer transceiver. (1) In normal mode, the transmitter converts TXD logic signals from the MCU CAN controller into differential CAN bus signals on CANH and CANL. The receiver converts differential bus signals to RXD logic levels referenced to VIO. The 5Mbps data rate supports CAN FD fast phase. (2) The VIO pin sets the logic voltage level for TXD, RXD, and STB pins, enabling direct connection to 3.3V MCU GPIO without external level shifters. This simplifies PCB design in mixed-voltage systems. (3) In standby mode (STB high), the transceiver enters a 4uA low-power state while monitoring the CAN bus for valid wake-up patterns. When a wake-up is detected, the RXD pin asserts low to signal the MCU. The VREF output provides a VCC\/2 reference for terminating split termination networks, reducing common-mode noise. The +\/-12V common-mode range and +\/-12kV ESD ensure robust operation in automotive environments.","pin_description":"
      Pin<\/th>Name<\/th>Function<\/th><\/tr>
      1<\/td>TXD<\/td>Transmit data input (VIO referenced)<\/td><\/tr>
      2<\/td>GND<\/td>Ground<\/td><\/tr>
      3<\/td>VCC<\/td>5V supply<\/td><\/tr>
      4<\/td>RXD<\/td>Receive data output (VIO referenced)<\/td><\/tr>
      5<\/td>VIO<\/td>I\/O voltage reference (2.8-5.5V)<\/td><\/tr>
      6<\/td>CANL<\/td>CAN bus low<\/td><\/tr>
      7<\/td>CANH<\/td>CAN bus high<\/td><\/tr>
      8<\/td>STB<\/td>Standby mode control<\/td><\/tr><\/table>","application_scenarios":"
      • Automotive CAN FD networks up to 5Mbps with 3.3V MCU<\/li>
      • Industrial CAN bus with +\/-12kV ESD protection<\/li>
      • Building automation with 4uA standby bus wake-up<\/li>
      • Medical equipment CAN networking with VIO flexibility<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
        SN65HVD1040DR<\/td>TI<\/td>No VIO pin, 1Mbps<\/td><\/tr>
        TJA1042T\/1J<\/td>NXP<\/td>No VIO, NRND<\/td><\/tr>
        MCP2558FD-H\/SN<\/td>Microchip<\/td>CAN FD, no VIO, SOIC-8<\/td><\/tr>
        TCAN1042VDRBRQ1<\/td>TI<\/td>AEC-Q100, VIO, SON-8<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/7645","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=7645"}],"version-history":[{"count":1,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/7645\/revisions"}],"predecessor-version":[{"id":7684,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/7645\/revisions\/7684"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=7645"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=7645"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=7645"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=7645"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}