{"id":7268,"date":"2026-06-24T03:11:54","date_gmt":"2026-06-24T03:11:54","guid":{"rendered":"https:\/\/materialparts.com\/ir2130strpbf\/"},"modified":"2026-06-24T03:11:54","modified_gmt":"2026-06-24T03:11:54","slug":"ir2130strpbf","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/ir2130strpbf\/","title":{"rendered":"IR2130STRPBF"},"content":{"rendered":"

\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n

The IR2130STRPBF from Infineon (formerly IR) is a 600V 3-phase bridge driver in a 28-SOIC package. With 200mA\/420mA source\/sink output current, over-current shutdown, and 2.5us internal deadtime, it drives six IGBTs\/MOSFETs in 3-phase inverter applications.<\/p>\n

\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n
\u0627\u0644\u062a\u0643\u0648\u064a\u0646<\/td>\n3-phase bridge (6 drivers: 3 high-side + 3 low-side)<\/td>\n<\/tr>\n
Offset Voltage<\/td>\n600 V max<\/td>\n<\/tr>\n
\u062a\u064a\u0627\u0631 \u0627\u0644\u0625\u062e\u0631\u0627\u062c<\/td>\n+200 mA \/ -420 mA (source\/sink)<\/td>\n<\/tr>\n
Gate Drive Supply<\/td>\n10 V to 20 V<\/td>\n<\/tr>\n
\u062a\u0623\u062e\u064a\u0631 \u0627\u0644\u0627\u0646\u062a\u0634\u0627\u0631<\/td>\n675 ns on \/ 425 ns off (typical)<\/td>\n<\/tr>\n
Internal Deadtime<\/td>\n2.5 us typical (IR2130)<\/td>\n<\/tr>\n
Over-Current Shutdown<\/td>\nYes (ITRIP, all 6 outputs off)<\/td>\n<\/tr>\n
FAULT Output<\/td>\nOpen-drain fault indication<\/td>\n<\/tr>\n
Current Sense Amplifier<\/td>\nGround-referenced op-amp<\/td>\n<\/tr>\n
\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n-40C to +125C<\/td>\n<\/tr>\n<\/table>\n

\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n
    \n
  • 3-phase bridge driver with 3 independent high\/low side channels for motor drive<\/li>\n
  • 600V bootstrap high-side operation with dV\/dt immunity and negative VS tolerance<\/li>\n
  • Built-in 2.5us deadtime with cross-conduction prevention logic<\/li>\n
  • Over-current shutdown via ITRIP pin disables all six outputs simultaneously<\/li>\n
  • Ground-referenced current sense amplifier for analog current feedback<\/li>\n
  • Open-drain FAULT output indicates over-current or undervoltage shutdown<\/li>\n<\/ul>\n

    \u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n
      \n
    • 3-phase AC motor and BLDC\/PMSM motor drive inverter gate driving<\/li>\n
    • UPS and solar inverter 3-phase power stage control<\/li>\n
    • Industrial variable frequency drive (VFD) with ITRIP over-current protection<\/li>\n
    • Appliance motor control for air conditioner and washing machine compressors<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The IR2130STRPBF from Infineon (formerly IR) is a 600V 3-phase bridge driver in a 28-SOIC package. With 200mA\/420mA source\/sink output current, over-current shutdown, and 2.5us internal deadtime, it drives six IGBTs\/MOSFETs in 3-phase inverter applications. Key Specifications Configuration 3-phase bridge (6 drivers: 3 high-side + 3 low-side) Offset Voltage 600 V max Output […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,50],"tags":[],"chip_brand":[173],"class_list":["post-7268","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-photodiodes","chip_brand-infineon"],"acf":{"brief_explanation":"600V 3-phase bridge driver, 200\/420mA, SOIC-28, 2.5us deadtime, ITRIP, FAULT, 6 drivers","date_code":"","package_case":"SOIC-28 Wide (17.87 x 7.50 x 2.65 mm, 28-SOIC W)","in_stock":5680,"datasheet":"https:\/\/www.infineon.com\/dgdl\/ir2130.pdf?fileId=5546d462533600a401535676bfa919db","price":"$1.78 @ 1ku","product_introduction":"The IR2130STRPBF from Infineon (formerly International Rectifier) is a high-voltage, high-speed 3-phase bridge driver IC in a 28-lead wide SOIC package. The device provides three independent high-side and low-side referenced output channels, capable of driving six N-channel power MOSFETs or IGBTs in a 3-phase inverter bridge configuration operating at up to 600V. The proprietary HVIC technology enables ruggedized monolithic construction with dV\/dt immunity and tolerance to negative VS transients. The IR2130 features built-in 2.5us typical deadtime with cross-conduction prevention logic, ensuring safe half-bridge operation without shoot-through. A ground-referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. The ITRIP function terminates all six outputs when an over-current condition is detected, providing comprehensive protection. An open-drain FAULT signal indicates whether an over-current or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched across all channels to simplify high-frequency operation. Logic inputs are compatible with CMOS or LSTTL outputs, down to 2.5V logic.","working_principle":"The IR2130STRPBF integrates three half-bridge driver channels with protection and monitoring functions. (1) Three Half-Bridge Channels: Each channel consists of a high-side driver (referenced to the floating VS node) and a low-side driver (referenced to COM). The high-side drivers use bootstrap operation with level-shifting circuits to translate the logic signals across the high-voltage isolation barrier. (2) Deadtime Logic: When the HIN input goes high (requesting high-side on), the device first ensures the low-side output is off, waits for the 2.5us deadtime, then turns on the high-side output. The cross-conduction prevention logic ensures both outputs in a half-bridge are never on simultaneously. (3) Current Sense Amplifier: The internal op-amp amplifies the voltage across an external current sense resistor in the ground return path. The amplified output (CAO) provides analog current feedback to the MCU. (4) Over-Current Shutdown: When the ITRIP pin voltage exceeds the threshold (approximately 0.5V), all six output drivers are immediately disabled. The FAULT pin is pulled low to indicate the shutdown event. (5) UVLO: Undervoltage lockout on both VCC and each bootstrap supply prevents insufficient gate drive voltage.","pin_description":"
      Pin<\/th>Name<\/th>Function<\/th><\/tr>
      1<\/td>VCC<\/td>Logic and low-side supply (10-20V)<\/td><\/tr>
      2<\/td>HIN1<\/td>High-side logic input phase 1<\/td><\/tr>
      3<\/td>HIN2<\/td>High-side logic input phase 2<\/td><\/tr>
      4<\/td>HIN3<\/td>High-side logic input phase 3<\/td><\/tr>
      5<\/td>LIN1<\/td>Low-side logic input phase 1<\/td><\/tr>
      6<\/td>LIN2<\/td>Low-side logic input phase 2<\/td><\/tr>
      7<\/td>LIN3<\/td>Low-side logic input phase 3<\/td><\/tr>
      8<\/td>FAULT<\/td>Fault output (open drain)<\/td><\/tr>
      9<\/td>CAO<\/td>Current amplifier output<\/td><\/tr>
      10<\/td>CA-<\/td>Current amplifier inverting input<\/td><\/tr>
      11<\/td>ITRIP<\/td>Over-current trip input<\/td><\/tr>
      12<\/td>VSS<\/td>Logic ground<\/td><\/tr>
      13-16<\/td>LO1-LO3,COM<\/td>Low-side outputs and power ground<\/td><\/tr>
      17-28<\/td>VS1-3,HO1-3,VB1-3<\/td>High-side floating supplies and outputs<\/td><\/tr><\/table>","application_scenarios":"
      • 3-phase AC motor and BLDC\/PMSM inverter gate driving at 600V bus<\/li>
      • UPS and solar inverter 3-phase power stage with ITRIP over-current protection<\/li>
      • Industrial variable frequency drive (VFD) with 2.5us deadtime<\/li>
      • Appliance motor control with FAULT output and current sense amplifier<\/li><\/ul>","alternative_models":"
        Manufacturer<\/th>Part Number<\/th>Package<\/th>Notes<\/th><\/tr>
        Infineon<\/td>IR2132STRPBF<\/td>SOIC-28<\/td>0.8us deadtime, faster<\/td><\/tr>
        Infineon<\/td>IRS2130DSTRPBF<\/td>SOIC-28<\/td>Newer, integrated bootstrap diode<\/td><\/tr>
        TI<\/td>UCC21520DW<\/td>SOIC-16<\/td>Isolated dual channel, not 3-phase<\/td><\/tr>
        Infineon<\/td>6EDL7141<\/td>QFN-48<\/td>Next-gen 3-phase driver<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/7268","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=7268"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/7268\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=7268"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=7268"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=7268"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=7268"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}