{"id":6253,"date":"2026-06-12T10:10:59","date_gmt":"2026-06-12T10:10:59","guid":{"rendered":"https:\/\/materialparts.com\/mcp6004t-i-sl\/"},"modified":"2026-06-12T10:10:59","modified_gmt":"2026-06-12T10:10:59","slug":"mcp6004t-i-sl","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/mcp6004t-i-sl\/","title":{"rendered":"MCP6004T-I\/SL"},"content":{"rendered":"

\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n

The MCP6004T-I\/SL from Microchip Technology is a quad 1 MHz low-power operational amplifier with rail-to-rail input and output. Operating from a single 1.8V to 6.0V supply with only 100uA typical quiescent current per amplifier, it is available in a SOIC-14 package rated for -40 to 85 C operation.<\/p>\n

\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n\n\n\n\n\n\n\n\n\n\n\n\n
\u0639\u062f\u062f \u0627\u0644\u0642\u0646\u0648\u0627\u062a<\/td>\n4<\/td>\n<\/tr>\n
Gain Bandwidth Product<\/td>\n1 MHz<\/td>\n<\/tr>\n
\u0645\u0639\u062f\u0644 \u0627\u0644\u062f\u0648\u0631\u0627\u0646<\/td>\n0.6 V\/us<\/td>\n<\/tr>\n
\u0646\u0637\u0627\u0642 \u062c\u0647\u062f \u0627\u0644\u0625\u0645\u062f\u0627\u062f<\/td>\n1.8V to 6.0V<\/td>\n<\/tr>\n
Quiescent Current (per amp)<\/td>\n100 uA (typ)<\/td>\n<\/tr>\n
\u062c\u0647\u062f \u0625\u0632\u0627\u062d\u0629 \u0627\u0644\u0645\u062f\u062e\u0644\u0627\u062a<\/td>\n4.5 mV (max)<\/td>\n<\/tr>\n
\u062a\u064a\u0627\u0631 \u062a\u062d\u064a\u0632 \u0627\u0644\u0625\u062f\u062e\u0627\u0644<\/td>\n1 pA (typ)<\/td>\n<\/tr>\n
CMRRR<\/td>\n60 dB (min)<\/td>\n<\/tr>\n
Phase Margin<\/td>\n90 degrees (typ)<\/td>\n<\/tr>\n
\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n-40 to 85 C<\/td>\n<\/tr>\n
\u0627\u0644\u062d\u0632\u0645\u0629<\/td>\nSOIC-14<\/td>\n<\/tr>\n<\/table>\n

\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n
    \n
  • Rail-to-rail input and output (RRIO)<\/li>\n
  • Ultra-low 100uA per-amplifier supply current<\/li>\n
  • 1 pA input bias current for high-impedance sensors<\/li>\n
  • Stable with capacitive loads up to 500pF<\/li>\n
  • AEC-Q100 qualified<\/li>\n<\/ul>\n

    \u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n
      \n
    • Battery-powered instrumentation<\/li>\n
    • Sensor signal conditioning<\/li>\n
    • Active filter circuits<\/li>\n
    • Portable medical devices<\/li>\n
    • General-purpose low-voltage amplification<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"

      Product Overview The MCP6004T-I\/SL from Microchip Technology is a quad 1 MHz low-power operational amplifier with rail-to-rail input and output. Operating from a single 1.8V to 6.0V supply with only 100uA typical quiescent current per amplifier, it is available in a SOIC-14 package rated for -40 to 85 C operation. Key Specifications Number of Channels […]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[19,13],"tags":[],"chip_brand":[134],"class_list":["post-6253","post","type-post","status-publish","format-standard","hentry","category-analog-linear-ics","category-integrated-circuits-ics","chip_brand-microchip"],"acf":{"brief_explanation":"Quad 1MHz RRIO op-amp, 1.8-6V, 100uA Iq, 1pA Ib, SOIC-14, -40 to 85C","date_code":"","package_case":"SOIC-14 (8.65 x 3.91 x 1.75mm)","in_stock":9932,"datasheet":"https:\/\/ww1.microchip.com\/downloads\/en\/DeviceDoc\/21733j.pdf","price":"$0.40 @ 10ku","product_introduction":"The MCP6004T-I\/SL from Microchip Technology is a quad general-purpose operational amplifier optimized for low-power, single-supply applications. With rail-to-rail input and output capability, it can process signals from ground to VDD without signal clipping. The 1 MHz gain bandwidth product and 0.6 V\/us slew rate make it suitable for low-frequency signal conditioning. The extremely low input bias current of 1 pA allows direct interfacing with high-impedance sensors. Operating from 1.8V to 6.0V with 100uA per-amplifier quiescent current, it is ideal for battery-powered portable instruments.","working_principle":"The MCP6004T-I\/SL employs a CMOS rail-to-rail operational amplifier architecture. **Input Stage**: A complementary PMOS\/NMOS differential pair provides rail-to-rail common-mode input range from VSS-0.3V to VDD+0.3V. The MOS input stage results in virtually zero input bias current (1 pA typical). **Gain Stage**: A high-gain stage with internal compensation provides the 1 MHz gain-bandwidth product. The dominant pole compensation capacitor ensures unconditional stability with unity-gain feedback and capacitive loads up to 500pF. **Output Stage**: A CMOS push-pull output stage swings rail-to-rail, reaching within millivolts of both supply rails under light load. The output can source and sink up to 23mA. **Bias Circuit**: A low-power bias network consumes only 100uA per amplifier. The 90-degree phase margin provides excellent settling behavior and stability in feedback circuits.","pin_description":"
      Pin<\/th>Name<\/th>Description<\/th><\/tr>
      1<\/td>VOUT A<\/td>Channel A output<\/td><\/tr>
      2<\/td>VIN- A<\/td>Channel A inverting input<\/td><\/tr>
      3<\/td>VIN+ A<\/td>Channel A non-inverting input<\/td><\/tr>
      4<\/td>VSS<\/td>Negative supply \/ ground<\/td><\/tr>
      5<\/td>VIN+ B<\/td>Channel B non-inverting input<\/td><\/tr>
      6<\/td>VIN- B<\/td>Channel B inverting input<\/td><\/tr>
      7<\/td>VOUT B<\/td>Channel B output<\/td><\/tr>
      8<\/td>VOUT C<\/td>Channel C output<\/td><\/tr>
      9<\/td>VIN- C<\/td>Channel C inverting input<\/td><\/tr>
      10<\/td>VIN+ C<\/td>Channel C non-inverting input<\/td><\/tr>
      11<\/td>VSS<\/td>Negative supply \/ ground<\/td><\/tr>
      12<\/td>VIN+ D<\/td>Channel D non-inverting input<\/td><\/tr>
      13<\/td>VIN- D<\/td>Channel D inverting input<\/td><\/tr>
      14<\/td>VOUT D<\/td>Channel D output<\/td><\/tr><\/table>","application_scenarios":"
      • Sensor Interface: pH, photodiode, and piezoelectric sensor amplification with 1pA input bias<\/li>
      • Battery Instruments: Portable multimeter and data logger front-ends operating from 2-cell batteries<\/li>
      • Active Filters: 2nd-4th order Butterworth and Chebyshev filters for anti-aliasing and noise rejection<\/li>
      • Medical Devices: ECG, EMG, and biopotential measurement with rail-to-rail signal handling<\/li>
      • Process Control: 4-20mA receiver amplifiers and signal conditioning for industrial sensors<\/li><\/ul>","alternative_models":"
        Model<\/th>Manufacturer<\/th>Key Difference<\/th><\/tr>
        MCP6004T-E\/SL<\/td>Microchip<\/td>Extended temp -40 to 125C<\/td><\/tr>
        LM324DR<\/td>TI<\/td>30V, 1.2MHz, NOT pin-compatible<\/td><\/tr>
        TLV274IPWR<\/td>TI<\/td>3MHz, 2.7-16V, RRIO, TSSOP-14<\/td><\/tr>
        OPA4340UA<\/td>TI<\/td>5.5MHz, 2.5-5.5V, RRIO, SOIC-14<\/td><\/tr>
        TSV914IPT<\/td>ST<\/td>8MHz, 2.5-5.5V, RRIO, TSSOP-14<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/6253","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=6253"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/6253\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=6253"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=6253"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=6253"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=6253"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}