{"id":3721,"date":"2026-06-08T02:19:47","date_gmt":"2026-06-08T02:19:47","guid":{"rendered":"https:\/\/materialparts.com\/tps54318rter\/"},"modified":"2026-06-08T02:19:47","modified_gmt":"2026-06-08T02:19:47","slug":"tps54318rter","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/tps54318rter\/","title":{"rendered":"TPS54318RTER"},"content":{"rendered":"<h2>\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n<p>The TPS54318RTER from Texas Instruments is a 2.95V to 6V input, 3A synchronous step-down DC-DC converter with integrated MOSFETs. It features 200kHz to 2MHz switching frequency, adjustable soft start, and power-good output in a 3mm x 3mm WQFN-16 package.<\/p>\n<h2>\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n<table>\n<tr>\n<td>\u0627\u0644\u0637\u0648\u0628\u0648\u0644\u0648\u062c\u064a\u0627<\/td>\n<td>Synchronous Buck<\/td>\n<\/tr>\n<tr>\n<td>\u062c\u0647\u062f \u0627\u0644\u0625\u062f\u062e\u0627\u0644<\/td>\n<td>2.95V to 6V<\/td>\n<\/tr>\n<tr>\n<td>\u062c\u0647\u062f \u0627\u0644\u062e\u0631\u062c<\/td>\n<td>0.8V to 4.5V (adjustable)<\/td>\n<\/tr>\n<tr>\n<td>\u062a\u064a\u0627\u0631 \u0627\u0644\u0625\u062e\u0631\u0627\u062c<\/td>\n<td>3A<\/td>\n<\/tr>\n<tr>\n<td>\u062a\u0631\u062f\u062f \u0627\u0644\u062a\u062d\u0648\u064a\u0644<\/td>\n<td>200kHz to 2MHz (adjustable)<\/td>\n<\/tr>\n<tr>\n<td>MOSFET RDS(on)<\/td>\n<td>30mOhm (typ, both HS and LS)<\/td>\n<\/tr>\n<tr>\n<td>Voltage Reference<\/td>\n<td>0.8V +\/-1%<\/td>\n<\/tr>\n<tr>\n<td>\u062a\u064a\u0627\u0631 \u0627\u0644\u062a\u0647\u062f\u0626\u0629<\/td>\n<td>350uA (typ)<\/td>\n<\/tr>\n<tr>\n<td>\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n<td>-40 to 150 C (junction)<\/td>\n<\/tr>\n<\/table>\n<h2>\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n<ul>\n<li>Two integrated 30mOhm MOSFETs for high efficiency<\/li>\n<li>Adjustable switching frequency: 200kHz to 2MHz<\/li>\n<li>+\/-1% voltage reference accuracy over temperature<\/li>\n<li>External clock synchronization<\/li>\n<li>Adjustable soft start\/sequencing<\/li>\n<li>Undervoltage and overvoltage power-good output<\/li>\n<li>Cycle-by-cycle current limit with thermal foldback<\/li>\n<li>Safe start-up into prebiased output<\/li>\n<\/ul>\n<h2>\u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n<ul>\n<li>Point-of-load regulation for DSP, FPGA, ASIC<\/li>\n<li>Broadband and telecom infrastructure<\/li>\n<li>Low-voltage, high-density power systems<\/li>\n<li>Server and storage power supplies<\/li>\n<li>Portable and battery-powered equipment<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The TPS54318RTER from Texas Instruments is a 2.95V to 6V input, 3A synchronous step-down DC-DC converter with integrated MOSFETs. It features 200kHz to 2MHz switching frequency, adjustable soft start, and power-good output in a 3mm x 3mm WQFN-16 package. Key Specifications Topology Synchronous Buck Input Voltage 2.95V to 6V Output Voltage 0.8V to [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[31,13],"tags":[],"chip_brand":[138],"class_list":["post-3721","post","type-post","status-publish","format-standard","hentry","category-dc-dc-converters","category-integrated-circuits-ics","chip_brand-ti"],"acf":{"brief_explanation":"3A sync buck DC-DC, 2.95-6V in, 0.8-4.5V out, 2MHz, integrated FETs, WQFN-16","date_code":"","package_case":"WQFN-16 (3.0 x 3.0 x 0.75 mm)","in_stock":4886,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/tps54318.pdf","price":"$1.30 @ 1ku","product_introduction":"The TPS54318RTER from Texas Instruments is a full-featured 6V, 3A synchronous step-down current-mode converter with two integrated 30mOhm MOSFETs. The device enables small designs by integrating the power MOSFETs, implementing current-mode control to reduce external component count, and supporting up to 2MHz switching frequency to minimize inductor size. The 0.8V +\/-1% voltage reference provides accurate regulation over the full -40 to 150 C junction temperature range. A 350uA typical operating quiescent current maximizes light-load efficiency, while the EN pin reduces shutdown current to 2uA. Features include adjustable soft start for controlled output ramp, power-good output with undervoltage\/overvoltage thresholds, external clock synchronization, and safe start-up into prebiased outputs. The device is packaged in a thermally enhanced 3mm x 3mm WQFN-16 package.","working_principle":"The TPS54318RTER operates as a current-mode synchronous buck converter. Key subsystems include: (1) Current-Mode PWM Controller - compares the output of the voltage error amplifier with the high-side switch current to set the duty cycle; this provides inherent cycle-by-cycle current limiting and simplified loop compensation; (2) Integrated MOSFETs - a 30mOhm high-side NMOS switch and 30mOhm low-side NMOS synchronous rectifier are integrated on-die; (3) Bootstrap Circuit - an external bootstrap capacitor between BOOT and PH provides gate drive voltage above VIN for the high-side NMOS; (4) Error Amplifier - the COMP pin allows external Type-II or Type-III compensation networks; (5) Soft Start - an external capacitor on the SS\/CLK pin programs the startup ramp time; (6) Power Good - an open-drain PWRGD output asserts when VOUT is within 93%-107% of the target; (7) Protection - cycle-by-cycle current limit, thermal shutdown with frequency foldback, and undervoltage lockout.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Function<\/th><\/tr><tr><td>1<\/td><td>GND<\/td><td>Ground<\/td><td>Power ground<\/td><\/tr><tr><td>2<\/td><td>PH<\/td><td>Power<\/td><td>Phase node (switch output)<\/td><\/tr><tr><td>3<\/td><td>PH<\/td><td>Power<\/td><td>Phase node (switch output)<\/td><\/tr><tr><td>4<\/td><td>VIN<\/td><td>Power<\/td><td>Input voltage supply<\/td><\/tr><tr><td>5<\/td><td>VIN<\/td><td>Power<\/td><td>Input voltage supply<\/td><\/tr><tr><td>6<\/td><td>EN<\/td><td>Input<\/td><td>Enable \/ UVLO adjust<\/td><\/tr><tr><td>7<\/td><td>SS\/CLK<\/td><td>I\/O<\/td><td>Soft-start cap \/ external clock sync<\/td><\/tr><tr><td>8<\/td><td>COMP<\/td><td>Output<\/td><td>Error amplifier output (compensation)<\/td><\/tr><tr><td>9<\/td><td>VSENSE<\/td><td>Input<\/td><td>Feedback voltage sense<\/td><\/tr><tr><td>10<\/td><td>AGND<\/td><td>Ground<\/td><td>Analog ground<\/td><\/tr><tr><td>11<\/td><td>PWRGD<\/td><td>Output<\/td><td>Power good (open-drain)<\/td><\/tr><tr><td>12<\/td><td>RT<\/td><td>Input<\/td><td>Switching frequency set resistor<\/td><\/tr><tr><td>13<\/td><td>BOOT<\/td><td>Power<\/td><td>Bootstrap capacitor connection<\/td><\/tr><tr><td>14-16<\/td><td>GND\/PH<\/td><td>Mixed<\/td><td>Ground and phase connections<\/td><\/tr><\/table>","application_scenarios":"<ul><li>Point-of-load regulation: 5V to 1.2V\/1.8V\/3.3V for DSP, FPGA, and ASIC cores<\/li><li>Broadband and telecom: POL regulators in line cards and switches<\/li><li>Server and storage: dense power supply rails with 2MHz switching<\/li><li>Portable equipment: high-efficiency 3.3V\/1.8V rails from Li-Ion battery<\/li><li>Industrial control: POL regulation with wide -40 to 150 C junction range<\/li><\/ul>","alternative_models":"<table><tr><th>Manufacturer<\/th><th>Part Number<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>TI<\/td><td>TPS54328RTER<\/td><td>WQFN-16<\/td><td>4.5-18V input, 3A<\/td><\/tr><tr><td>TI<\/td><td>TPS54317RTER<\/td><td>WQFN-16<\/td><td>Lower Iq version<\/td><\/tr><tr><td>Monolithic Power<\/td><td>MPM3690GQV-30<\/td><td>QFN-28<\/td><td>3A, integrated inductor<\/td><\/tr><tr><td>Infineon<\/td><td>IR3843AMTRPBF<\/td><td>PQFN-18<\/td><td>3A, 4.5-14V input<\/td><\/tr><tr><td>Richtek<\/td><td>RT8059GQW<\/td><td>WQFN-16<\/td><td>3A, 2.7-5.5V input<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/3721","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=3721"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/3721\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=3721"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=3721"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=3721"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=3721"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}