{"id":3401,"date":"2026-06-04T04:30:48","date_gmt":"2026-06-04T04:30:48","guid":{"rendered":"https:\/\/materialparts.com\/bq29707dset\/"},"modified":"2026-06-04T04:30:48","modified_gmt":"2026-06-04T04:30:48","slug":"bq29707dset","status":"publish","type":"post","link":"https:\/\/materialparts.com\/ar\/bq29707dset\/","title":{"rendered":"BQ29707DSET"},"content":{"rendered":"<h2>\u0646\u0638\u0631\u0629 \u0639\u0627\u0645\u0629 \u0639\u0644\u0649 \u0627\u0644\u0645\u0646\u062a\u062c<\/h2>\n<p>The BQ29707DSET from Texas Instruments is a cost-effective voltage and current protection IC for single-cell lithium-ion and lithium-polymer batteries. Packaged in a tiny 6-pin WSON (DSE) package measuring just 1.5 x 1.5 mm, it provides overcharge, overdischarge, overcurrent, and short-circuit protection with factory-set thresholds and a low operating current of 4 \u00b5A.<\/p>\n<h2>\u0627\u0644\u0645\u0648\u0627\u0635\u0641\u0627\u062a \u0627\u0644\u0631\u0626\u064a\u0633\u064a\u0629<\/h2>\n<table>\n<tr>\n<td>Number of Cells<\/td>\n<td>1<\/td>\n<\/tr>\n<tr>\n<td>Operating Current (Typ)<\/td>\n<td>4 \u00b5A<\/td>\n<\/tr>\n<tr>\n<td>\u062a\u064a\u0627\u0631 \u0625\u064a\u0642\u0627\u0641 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n<td>100 nA<\/td>\n<\/tr>\n<tr>\n<td>Supply Voltage (Max)<\/td>\n<td>8 V<\/td>\n<\/tr>\n<tr>\n<td>Protection Features<\/td>\n<td>OVP, UVP, OCC, OCD, SCP<\/td>\n<\/tr>\n<tr>\n<td>FET Drive<\/td>\n<td>CHG and DSG (low-side N-ch)<\/td>\n<\/tr>\n<tr>\n<td>\u062f\u0631\u062c\u0629 \u062d\u0631\u0627\u0631\u0629 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/td>\n<td>-40 \u062f\u0631\u062c\u0629 \u0645\u0626\u0648\u064a\u0629 \u0625\u0644\u0649 +85 \u062f\u0631\u062c\u0629 \u0645\u0626\u0648\u064a\u0629<\/td>\n<\/tr>\n<tr>\n<td>\u0627\u0644\u062d\u0632\u0645\u0629<\/td>\n<td>WSON (DSE) | 6 pins<\/td>\n<\/tr>\n<\/table>\n<h2>\u0627\u0644\u0645\u064a\u0632\u0627\u062a<\/h2>\n<ul>\n<li>Factory-set fault protection thresholds and timers<\/li>\n<li>Overcharge detection (OVP) and overdischarge detection (UVP)<\/li>\n<li>Charge overcurrent (OCC) and discharge overcurrent (OCD) detection<\/li>\n<li>Load short-circuit detection (SCP)<\/li>\n<li>Zero-volt charging detection for depleted batteries<\/li>\n<li>CHG and DSG FET drive outputs<\/li>\n<li>Ultra-low shutdown current of 100 nA<\/li>\n<li>Small 1.5 x 1.5 mm WSON package<\/li>\n<\/ul>\n<h2>\u0627\u0644\u062a\u0637\u0628\u064a\u0642\u0627\u062a<\/h2>\n<ul>\n<li>Single-cell Li-ion\/Li-Po battery packs<\/li>\n<li>Smartphones and tablets<\/li>\n<li>Wearable devices<\/li>\n<li>Portable electronics<\/li>\n<li>Battery-powered medical devices<\/li>\n<\/ul>","protected":false},"excerpt":{"rendered":"<p>Product Overview The BQ29707DSET from Texas Instruments is a cost-effective voltage and current protection IC for single-cell lithium-ion and lithium-polymer batteries. Packaged in a tiny 6-pin WSON (DSE) package measuring just 1.5 x 1.5 mm, it provides overcharge, overdischarge, overcurrent, and short-circuit protection with factory-set thresholds and a low operating current of 4 \u00b5A. Key [&hellip;]<\/p>\n","protected":false},"author":2,"featured_media":0,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[13,29],"tags":[],"chip_brand":[138],"class_list":["post-3401","post","type-post","status-publish","format-standard","hentry","category-integrated-circuits-ics","category-power-management-ics-pmic","chip_brand-ti"],"acf":{"brief_explanation":"Single-cell Li-ion\/Li-Po battery protection IC with OVP\/UVP\/OCC\/OCD\/SCP, 4\u00b5A Iq, 6-WSON (1.5x1.5mm)","date_code":"","package_case":"WSON (DSE) | 6 pins (1.50 x 1.50 x 0.75 mm)","in_stock":3198,"datasheet":"https:\/\/www.ti.com\/lit\/ds\/symlink\/bq2970.pdf","price":"$0.172 @ 1ku","product_introduction":"The BQ29707DSET is a cost-effective voltage and current protection integrated circuit from Texas Instruments designed for single-cell lithium-ion and lithium-polymer battery packs. It provides comprehensive protection including overcharge (OVP), overdischarge (UVP), charge overcurrent (OCC), discharge overcurrent (OCD), and short-circuit (SCP) detection. The device monitors external power FETs and provides drive outputs for both charge (CHG) and discharge (DSG) FETs, operating at just 4 \u00b5A in normal mode and 100 nA in shutdown mode.","working_principle":"The BQ29707 operates through three main subsystems: (1) Voltage Monitoring: Continuously measures cell voltage through the VCC pin, comparing against factory-set OVP and UVP thresholds to protect against overcharge and overdischarge conditions. (2) Current Sensing: Detects overcurrent conditions by monitoring the voltage drop across an external sense resistor between the CS and VSS pins, with \u00b15mV accuracy for OCD and OCC detection. (3) FET Control: Drives the CHG and DSG FET gate outputs to disconnect the battery when a fault is detected, with configurable fault timers and recovery conditions for each protection type.","pin_description":"<table><tr><th>Pin<\/th><th>Name<\/th><th>Type<\/th><th>Description<\/th><\/tr><tr><td>1<\/td><td>CS<\/td><td>Input<\/td><td>Current sense input for overcurrent detection<\/td><\/tr><tr><td>2<\/td><td>VCC<\/td><td>Power<\/td><td>Supply voltage \/ cell voltage input<\/td><\/tr><tr><td>3<\/td><td>DSG<\/td><td>Output<\/td><td>Discharge FET gate drive<\/td><\/tr><tr><td>4<\/td><td>CHG<\/td><td>Output<\/td><td>Charge FET gate drive<\/td><\/tr><tr><td>5<\/td><td>VSS<\/td><td>Ground<\/td><td>Ground reference<\/td><\/tr><tr><td>6<\/td><td>NC<\/td><td>No Connect<\/td><td>Not connected (thermal pad to VSS)<\/td><\/tr><\/table>","application_scenarios":"<ul><li>Single-cell Li-ion battery pack protection in smartphones and wearables<\/li><li>Portable medical device battery safety<\/li><li>Bluetooth headset battery management<\/li><li>IoT device battery protection with minimal footprint<\/li><li>Portable instrument battery packs requiring comprehensive fault detection<\/li><\/ul>","alternative_models":"<table><tr><th>Model<\/th><th>Manufacturer<\/th><th>Cells<\/th><th>Package<\/th><th>Notes<\/th><\/tr><tr><td>BQ2970XDSET<\/td><td>TI<\/td><td>1<\/td><td>6-WSON<\/td><td>Different threshold variant<\/td><\/tr><tr><td>S-8261ABJMD<\/td><td>Seiko<\/td><td>1<\/td><td>SOT-23-6<\/td><td>Popular alternative<\/td><\/tr><tr><td>AP9211SA-AD<\/td><td>Diodes Inc<\/td><td>1<\/td><td>SOT-23-6<\/td><td>Pin-compatible option<\/td><\/tr><tr><td>R5460N153D<\/td><td>Ricoh<\/td><td>1<\/td><td>DFN-8<\/td><td>Higher precision option<\/td><\/tr><\/table>"},"_links":{"self":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/3401","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/users\/2"}],"replies":[{"embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/comments?post=3401"}],"version-history":[{"count":0,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/posts\/3401\/revisions"}],"wp:attachment":[{"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/media?parent=3401"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/categories?post=3401"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/tags?post=3401"},{"taxonomy":"chip_brand","embeddable":true,"href":"https:\/\/materialparts.com\/ar\/wp-json\/wp\/v2\/chip_brand?post=3401"}],"curies":[{"name":"\u062f\u0628\u0644\u064a\u0648 \u0628\u064a","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}